Wow, fascinating! Love the steam gauges! And your expertise and obvious affection for this veteran jet. (I fly a ‘46 Champ, hand prop, so love old school.)
Beautiful aircraft and helpful overview. I'm currently 2.5 hours into right seat and looking forward to any chance I can get to train up to PIC. Going over the systems now, and trying to digest all of the intricacies! The engineers had fun with this one. Thanks for the info. safe flying.
I learned a lot from this presentation re the Citation II from a very beautiful captain, my son kept asking to see the RUclips clip over & over at least this is documentary-like not some empty movie. Good job Mr Johnson.
@@behindthen0thing they curl the water back towards the ground not allowing water to go up the sides of the fuselage, the are only on aircraft with engines on the fuselage
TKS leading edges are also made from stainless steel verses the aluminum heated leadings as TKS can be corrosive to aluminum. Stainless has a very good corrosion resistance.
Looking to get an SII someday. Heard the engines were almost impossible to get. Cool work-around you did. Yeah, heard the TKS was the one downsides of the S. A lot of airplane for the money though.
And if you observe, the windshield alcohol is on able to be supplied to the pilots windshield only, the copilots side does not have the nozzles for alcohol.
Really great video. Was thinking of looking at a Super II presented to me. This brought me up to speed, and answered by questions. Seems like a CJ2 or CJ2+ is a better choice on the used market.
Actually Aubrey you were close, but the reason to the the chines are on the nose wheel is not to deflect water from the belly, rather to deflect water away from the engines..prevent water ingestion on landing or takeoff risking engine flameouts.
Currently working on my IR. Can't wait to get my hand on something faster than 110kts during cruise! Very nice plane, I believe i've worked this plane at BJC Dallas Love Field.
ErikJohnston I understand that but it’s annoying to me when on a 20 minute video I have to watch two 15 second ads (same exact ads) every 5 minutes. Just being honest.
Tony Tech I appreciate your honesty. It takes an insane amount of time and a good chunk of my own money and time away from my family to make these videos. The ads help a little bit with gas money if you will.
Tony Tech Jesus....is it really that tough to watch these ads? Considering how much time it takes to make these videos? You’ve just wasted more time complaining about the ads on here then watching them. Some people..
@@behindthen0thing Aubrey is smart, she knows the components and workings of the aircraft with an emphasis on excellent service to her clients. Her work is her passion and talking to her, her brilliance shines through.
Try using a fluid morph to cover those jump cuts of use broll. It makes the watcher think they’re having a stroke. I’ve used fluid morphs to cover jump cuts in avid media composer for 20 years on everything from tv news, to corporate video, to large studio feature films. They recently (few years ago) introduced a version of it on Adobe premiere. It’s not as good but it’s fine. What they do is morph the image between the cuts to make it disappear. Just like the Michael Jackson black and white video face morphing. But since it’s the same person in almost the same position, you can make a seamless cut. You can also play around with the position of each in and out frame to help it as well as control motion vectors. ruclips.net/video/ML1kKzzipwM/видео.html
![Noob To Max With DRAGON REWORK In Blox Fruits [FULL MOVIE]](http://i.ytimg.com/vi/LnBMOinoOvA/mqdefault.jpg)
Great video Eric! Aubrey did a nice job of explaining the nuances of this rare Citation!
Very best walk around I have seen!
Weldone what a cool presentation Aubrey
good aircraft good video sound...etc...
Many thanks!
Great video, excellent walk through!
Glad you enjoyed it!
I hade to watch this video twice. The second time I tried to pay more attention to the plane. Beautiful ,Beautiful !
Wow, fascinating! Love the steam gauges! And your expertise and obvious affection for this veteran jet. (I fly a ‘46 Champ, hand prop, so love old school.)
Beautiful aircraft and helpful overview. I'm currently 2.5 hours into right seat and looking forward to any chance I can get to train up to PIC. Going over the systems now, and trying to digest all of the intricacies! The engineers had fun with this one. Thanks for the info. safe flying.
I enjoyed your presentation
Thanks
Beautiful and smart and great walk around.
I learned a lot from this presentation re the Citation II from
a very beautiful captain, my son kept asking to see the RUclips clip over & over at least this is documentary-like not some empty movie. Good job Mr Johnson.
chine tires primary purpose are to keep water and debris out of the engines on takeoff and landings
murf
Correct
Yeah and how does it accomplish that? By flinging the water outward toward the engine?
@@behindthen0thing they curl the water back towards the ground not allowing water to go up the sides of the fuselage, the are only on aircraft with engines on the fuselage
Thats a terrific wing, I love the shape.
Great video. Thanks for sharing.
Congratulations, beautiful presentation, I fly a CITATION 2 in Brasil and I really like this aircraft.
This was informative and entertaining!
Great video and presentation of the citation super 2, I'm 6 feet tall, would I fit comfortably in the pilot seat?
TKS leading edges are also made from stainless steel verses the aluminum heated leadings as TKS can be corrosive to aluminum. Stainless has a very good corrosion resistance.
1:30 The chines on the nose wheel are to stop water/snow from going in the engines.
Looking to get an SII someday. Heard the engines were almost impossible to get. Cool work-around you did. Yeah, heard the TKS was the one downsides of the S. A lot of airplane for the money though.
And if you observe, the windshield alcohol is on able to be supplied to the pilots windshield only, the copilots side does not have the nozzles for alcohol.
Great Job Aubrey!
Great walk around, very interesting.
Really great video. Was thinking of looking at a Super II presented to me. This brought me up to speed, and answered by questions. Seems like a CJ2 or CJ2+ is a better choice on the used market.
I just love the Citation 1 and 2. They are very honest, easy to fly and primitive rugged airplanes :-)Gotta love them !!
Cool aircraft. Nice to see such a classic cockpit. Gives it character and not just glass panels.
@Larry Granstaff if you know how much it can cost to convert that cockpit to glass you don't wonder anymore.
Actually Aubrey you were close, but the reason to the the chines are on the nose wheel is not to deflect water from the belly, rather to deflect water away from the engines..prevent water ingestion on landing or takeoff risking engine flameouts.
Currently working on my IR. Can't wait to get my hand on something faster than 110kts during cruise! Very nice plane, I believe i've worked this plane at BJC Dallas Love Field.
Couldn't see any plane on this material.
Dont know which i like more, the plane or pilot 😍
Cool aircraft! So what does it use for navigation? GPS? I saw no nav button on the autopilot, so you just set the heading or course ?
Slow?? What is the crusing speed and max range with 6 passengers pls?
Over 9000
the unsecured weights in the nose are a bit of a worry
jimmytechnologies that is quite terrifying actually
Bit of nasty turbulence and and that could put a hole in the fuselage
Just my thaughts exactly. Why would you even want to skip on securing those weights?
Yeah, i fly a Citation Super 2 all the time, totally know what she's on about.
Hello, what is the price of millions of dollars?
A million dollars costs a million dollars.
If you have to ask, you can't afford it.
@Mourning Star mersi.
Those rain door right below the windshield are a nightmare for mechanics to adjust!
That is a very hot plane ✈️
well she is cute :)
Poor man's Learjet.
(lol a great video like always)
Nice video but why the ads every so often?
Tony Tech
It helps me make a little money so I can keep making free videos for everyone to enjoy.
ErikJohnston
I understand that but it’s annoying to me when on a 20 minute video I have to watch two 15 second ads (same exact ads) every 5 minutes.
Just being honest.
Tony Tech
I appreciate your honesty. It takes an insane amount of time and a good chunk of my own money and time away from my family to make these videos. The ads help a little bit with gas money if you will.
ErikJohnston
I get it. But can you at least do different ads? I literally watched the same two ads.
Tony Tech Jesus....is it really that tough to watch these ads? Considering how much time it takes to make these videos? You’ve just wasted more time complaining about the ads on here then watching them. Some people..
A good Texan girl with awesome eyes....nice;-))
I would love to fly Gulfstreams, Bombardier, Citation, and Dassault Falcons, when I get my liscenses.
When Will we see
you fliying?
best.. introducing..
Cool aircraft but her eyes WOW
Aubrey, you are fun, wish I could fly with you!
I've met her, she's an extremely interesting person, very passionate about her work.
@@texan903 what's she like in real life
@@behindthen0thing Aubrey is smart, she knows the components and workings of the aircraft with an emphasis on excellent service to her clients. Her work is her passion and talking to her, her brilliance shines through.
What if you have to go really bad
Try using a fluid morph to cover those jump cuts of use broll. It makes the watcher think they’re having a stroke. I’ve used fluid morphs to cover jump cuts in avid media composer for 20 years on everything from tv news, to corporate video, to large studio feature films.
They recently (few years ago) introduced a version of it on Adobe premiere. It’s not as good but it’s fine. What they do is morph the image between the cuts to make it disappear. Just like the Michael Jackson black and white video face morphing. But since it’s the same person in almost the same position, you can make a seamless cut.
You can also play around with the position of each in and out frame to help it as well as control motion vectors. ruclips.net/video/ML1kKzzipwM/видео.html
She’s cute!
She has nice boots too. 👢
slowtation
Aubrey, do you happen to have a twin sister who's single?
Yup
Seriously???
Hahahah lovey pilot #crush 😂