I love this video, I have been doing the craft knife and smooth method forever but not seen the iron in action in combination as well, I will surely be doing this in the future.
Put some parchment paper on this beauty and get a copy of the key and use your spares to work on this. You fixed it and its gorgeous, it would be a shame not to work on it. I hope we see this finished some day. But get that icky cover off it! I iron my canvases all the time now, but never have I used steam...I would have thought it would ruin it, but omg, it works. There's hope for all canvases out there...can you hear the canvas angels singing? Lol Thank you so much for sharing!
i watched the entire video very interesting to know. im 31 an have never owned a iron, but i think its time i start, Thanks so much for sharing this video with everyone
I usually slice them use a heavy book. That takes time. I will try the iron next time. I got 2 bad canvases then a refund. I was able to save the canvases and the painting turned out beautiful.
I remember watching the first go around- you do have the inventory sheet! Don't give up now that you've fixed it! Recover it with your squares (or other used up cover paper from your smaller kits, particularly at the seams if you don't have enough to do the entire 60x80). Find the sheet that you showed us in the first video and maybe you'll eventually build up enough spares to complete the canvas. Smashing job!
@@addmorezest I love watching your videos, pretty sure I got a ton of dp tips from you. Thanks for your hard work and maybe one day we will see you completing this image!
Just had something come in from Ali. And it was a huge custom 60x80 piece. After putting heavy objects on it, I had a huge pucker and I just couldn’t stretch it enough. Anyway reached out to the seller and they are going to make it right. But it’s so disappointing when this happens!
Great job with that canvas! What a mess it was. Too bad you can’t actually work on it without the legend. It would be another great one to do with spare beads.
What a nightmare of a canvas! I have a canvas coming I am super concerned it will look like this. I am so thankful that you posted this video! Can you iron a canvas with double sided? Or is it only for poured glue? I hope you are able to find some compatible diamonds, that will be a beautiful picture if you do!
She does have the inventory sheet in the original! I feel like I have seen the whole journey now- goes to show you that I like Rebecca's videos since I remember it... I hope she finds it, because it really is a pretty image. I guess it will be a project that she can do once she finishes her HAED.
Well done, I'm so glad it was saved
I think that canvas is still useable, it'll turn out *BEAUTIFUL*❣️
Hope you got it done, #Rebecca !
That is amazing. I thought you would never be able to get these puckers out. Well done Rebecca 😁😁😁
Thank you for this! I’ll try to fix my damaged canvas!
I love this video, I have been doing the craft knife and smooth method forever but not seen the iron in action in combination as well, I will surely be doing this in the future.
I hate ironing too but, thanks for showing us how to fix these problems. I have a few that will need working on.
Wow you made the canvas great again
This is amazing!! You fixed it! Thanks so much for sharing this 👍 be safe!
Great video! Amazing what a little work & patience can do. It is a beautiful image.
Wow! Amazing recovery!!
Put some parchment paper on this beauty and get a copy of the key and use your spares to work on this. You fixed it and its gorgeous, it would be a shame not to work on it. I hope we see this finished some day. But get that icky cover off it! I iron my canvases all the time now, but never have I used steam...I would have thought it would ruin it, but omg, it works. There's hope for all canvases out there...can you hear the canvas angels singing? Lol Thank you so much for sharing!
Very impressive!!!! Thank you for going into detail regarding these deep crevasses!
i watched the entire video very interesting to know. im 31 an have never owned a iron, but i think its time i start, Thanks so much for sharing this video with everyone
That was amazing to watch! Now I need to buy an iron, as I use one about every 50 years. lol
Me too. I can’t remember the last time I used one on clothes.
Way to go! Amazing!
Thank you 🙏👍✊👀👀👀👀
It looks great where you fixed it!
You could use it as a blank canvas for a HEAD or any other design you'd like. It is a nice picture.
thanks a lot for the little .. no no .. the BIG trick... it's good to know ....
I usually slice them use a heavy book. That takes time. I will try the iron next time. I got 2 bad canvases then a refund. I was able to save the canvases and the painting turned out beautiful.
Fantastic... Great job.
Thank you for this video. There may be hope for one of my canvases now!
Wonderful job!
Great job!
I remember watching the first go around- you do have the inventory sheet! Don't give up now that you've fixed it! Recover it with your squares (or other used up cover paper from your smaller kits, particularly at the seams if you don't have enough to do the entire 60x80). Find the sheet that you showed us in the first video and maybe you'll eventually build up enough spares to complete the canvas. Smashing job!
Your right! I did have it. All located now. 💕
@@addmorezest I love watching your videos, pretty sure I got a ton of dp tips from you. Thanks for your hard work and maybe one day we will see you completing this image!
Just had something come in from Ali. And it was a huge custom 60x80 piece. After putting heavy objects on it, I had a huge pucker and I just couldn’t stretch it enough. Anyway reached out to the seller and they are going to make it right. But it’s so disappointing when this happens!
Great job! Do you know if that design is still available somewhere. 😳I would love to work on a painting like this.
I'm not sure sorry as it was given to me by a subscriber. I have tagged her in the post on Facebook, so hopefully she sees it.
Great job with that canvas! What a mess it was. Too bad you can’t actually work on it without the legend. It would be another great one to do with spare beads.
I found the legend. All is right with the world. 💕
@@addmorezest Yesss! We look forward to watching you work on some of that.
That's amazing! Great technique! I love that design, do you have the name if this one? Would love to find that one for myself...
I think the lady who sent it to me got it as a custom.
4kidsat147 - Diamond Painting & Scrapbooking thanks for letting me know, I can stop making myself crazy!
@@ladycaruso If you're in my Facebook group you could try asking Debra as she's a member, maybe she'll share...
What a nightmare of a canvas! I have a canvas coming I am super concerned it will look like this. I am so thankful that you posted this video! Can you iron a canvas with double sided? Or is it only for poured glue? I hope you are able to find some compatible diamonds, that will be a beautiful picture if you do!
I thought the canvas on the video was a double sided tape canvas. Is it not?
Thank you, great video! Are you going to do this canvas?
I think I will. Not sure when but I have the inventory sheet so I can. 💕
Thanks a lot ! Is there a chance the pukers come back or is this solution permanent ?
I’d say it’s permanent as the glue has been cut so it doesn’t go back to the shape, but I’ll let you all know if that changes.
Mine were fine once I got them out and the painting came out really good
Maybe you can find the key or get it from the lady that sent it. Might knock down a box of spares. 😀
She does have the inventory sheet in the original! I feel like I have seen the whole journey now- goes to show you that I like Rebecca's videos since I remember it... I hope she finds it, because it really is a pretty image. I guess it will be a project that she can do once she finishes her HAED.
It’s all good. I found it. In the box I took the canvas from. 🙄
It’s 60x80cms
TFTC. 💛🏅🎉☕️👍
👀
Why dont you get your tape measure out 2 find how big your canvas is
I wasn’t thinking for this video. Lol it’s 60x80. 😂
Nice 2 watch stay safe🌈🌈🌈🌈🌈
This seem very very nerve wracking!!! I don’t know that I could do it! Lol
It would be great if you showed how the canvas behaved after all this work. I see that you use the knife with no mercy against the canvas!
I've not worked on it yet as I would need to use my spares to do it, so it might be a future project.