Man....I am literally got tears... I was badly badly needed this... Extremely extremely extremely thankyou...... Man I don't have much words... God bless u...and ur family and all loved ones...thanks thanks....
@@aljonmariano8447 I did the "disable/enable" steps initially, and saw some success. In the end, I had to update my BIOS. Doing so actually corrected a number of issues I was having. Unfortunately, I'm still having issues with one hub in particular (the Razer headset stand/USB hub) when the PC restarts unexpectedly (such as after a power outage). I'll have to shut down, unplug it, restart, and then plug it back I'm after boot is complete.
idk, why my laptop can do this shit. it all good and suddenly this problems happen, i think my mouse was broken but i try it on another mouse and the result still same. I do these steps and nothing fixed. Any1 know how to fix this?
Thank you so much! I've been sitting on my ass the last 6 hours trying to fix an issue I recently encountered and you, you just saved me from a mental breakdown! You're a blessing in the skies
When I didn't get the options on my windows 10 PC for the 1st method, I underestimated the video to be outdated but the comments pushed me to keep at it and the third method did do the job. Thanks for listing a number of methods and explaining it in an easy way.
In my case, I was trying to connect my mobile phone via a cable. None of the above methods worked, only replacing the cable! Mysterious things happen..
Almost formatted my whole laptop_I was really giving up on it now, got irritated by the sound and message flashing on my screen non stop You are a life saver🙏🏾, big ups on to you ...
Bro your a life saver i literally went to buy a new controller before and once i got the new one i thought it broke but it didn't so i found your vid and it works. SO NOW I HAVE 2 CONTROLLERS THAT WORK THANKS BRO!
Thank you for this video, especially with voiced steps, it's a lot less straining to listen then it is to read. Method 2 fixed my problem, and so far file explorer recognizes and can open the usb, (honestly I had no hope of being able to fix it, because I had pulled out my usb when it was still flashing. I figured that it'd be fine because I'd done the whole "eject usb disk" thingamajig, but I was sorely mistaken), and again, thank you, you saved a good couple of artworks and songs I've made and saved on my usb. I'll try to be more careful in the future.
3:39 The driver reinstallation is most likely the same thing that happens when you "scan for hardware changes" (I'll check this momentarily). No need to reboot the machine in this case, just delete the driver then scan for hardware changes.
I flashed my Redmi 9i with MediaTek Bootloader Unlock tool, it worked on my POCO M2 Device but this error came to my Redmi 9i , It did run some commands , then my Redmi 9i device just went black. Now I connect the device to USB Port then this error is coming.
I tried every step in this video multiple times and nothing worked, finally I went and unplugged and replugged every usb cord and the problem was solved. I could have saved an hour if I tried that 1st.
Thank you so much!!! By the time I got to method 3, it worked! I'm still reeling from relief after 2vweeks of not been able to transfer my files. God bless you and provide solutions to your problems!!
Hey dear uploader, YOU ARE A LEGEND! For who ever is reading this and has tried all 4 methods and none has worked with them then let me tell you that I have experienced the same thing until getting to the 5th solution. what I basically did for my Dell laptop was to just literally 1) hold down the off/on button, forcing the laptop to shut down. 2) then I turned it on and as soon as it turned on I restarted. 3) After the restart I unplugged and plugged my device to see if it would get recognized... and voila! My dualshock 4 device got recognized and when I open the device manager I no longer see an unrecognized device. now I can play on my pcsx2 emulator without an issue! Thanks again uploader!
@@ArtCulturZ power supply (in my case which was a laptop) was my charger, if you have a Desktop PC then it would be your power supply, which is the same thing to connect after PC restarts. But try the preceding methods before you get to solution number 5, I recommend that.
When the system is powered on, the usb keyboard power indicator (Num lock) starts flickering continuously and the keyboard gets disconnected and again reconnects. This whole thing repeats again and again. What's the problem ?
WOW!!!!!!! YOU ARE A LIFE SAVER! I REALLY THOUGHT THAT THERE WILL BE NO CHANCE OF FIXING MY LAPTOP UNTIL I REACHED THE 4TH METHOD!!!!! I LOVE YOU!!! THANK YOU!!!
Thank you very much. Method 3 worked. I thought my older brother would scold me again because I broke his mouse. I was really crying. Thank you. Method 3 really worked. I'm happy because my mouse is fine. Thanks to you. I even translate it in english so that you could understant. I will be careful next time. Thaank youuu very muchhhh. Philippines
@@sachinsharma8750 Really not sure if our issues are similar, yet we recently triggered 'Code43' while plugging the USB cord we've always used into our device. The cord side damaged the device USB plug-in port. Possibly there-in lies your cause. Bad cord, a bad port on device? The reason I suggest this is because these solutions also failed to help our dilemma as well. Good Luck!
U r an angel buddy, I was kind of pissed, and was thinking what to do because nothing was working and I found your video, and now everything is working fine🙏🏻❤
For those who didnt fix this problem with method 1 to 6...dont be sad, do method 7 (BIOS UPDATE) or even better get someone who knows what he is doing if you dont know how to use BIOS settings and such! Upadating BIOS should fix problems like this immediately. But...in case if that doesnt help maybe you damaged the USB port or what i saw couple of times there is always some dirt, spider webbing or even candy (YES CANDY) and stuff like that preventing PC and hardware to properly communicate. Try to clean it as careful as possible!!!
Thank you so very much! Method 2 2:57 worked for me! Update: My USB couldn't connect to my computer again and method 2 didn't work. Instead, method 5 7:26 did.
Turns out I had to put my plug into another port which was weird. . I wonder if the malfunctions happened because the ports weren't close enough. Even so this tutorial was so clear and informative, and no nonesense! Thanks so much and I'm sure many others will benefit!
Thanks bro your video is like a life in my lockdown when my keyboard stopped working while playing pubg... Thnks a lot brother only a gamer can understand it.. thanks a lot
@@adilmalik1232 Try mounting your USB. Your device probably recognizes it, you just can't see it however. Perhaps use a different computer to first unmount and reformat it. Then go back to your windows PC and then mount it and assign a letter to it. This worked for me
@@34521ful Much Appreciated Brother For Your Interest. I Have fixed That Problem By Restarting My Laptop And After Some Time Usb Automatically Connects IDK how that happened THANKS ALOT FOR your assistance Brother
Thank you! So far so good. I had previously watched a video about doing this in device settings / USB controlers some have a power management option with the same issue he discuss in option 3. I don't know if this method solves that one as well as I had already done it. Here's the link to the other one. ruclips.net/video/BAmZW1_As1g/видео.html
Guys before doing these all steps just restart ur mobile and check . I tried these all steps but it didn't work but then I tried restarting my phone then it worked 🙃
Thank you so much ..i tried all the first 4 & finally step 4 worked ....thank you a ton ....it was really mind boggling & great relieve .,it's solved ...your new subscriber ...MGBU
3 years later and your still the man thanks!!!!
Cap aint no way it qorked
@@Zywrldz. I’m goku
4 years😎😎😎
And you're not
4*
Man....I am literally got tears...
I was badly badly needed this...
Extremely extremely extremely thankyou......
Man I don't have much words...
God bless u...and ur family and all loved ones...thanks thanks....
God bless you too..
UR GRAMMAR AND VOCABULARY LOOOOOOOL
@@r.a.n.a6955 uh who cares about grammar
@@not_eagleye frrrr
@@r.a.n.a6955 Dude who cares, hes learning..still
Two years later, and you're still the man! Thanks!
which method?
@@aljonmariano8447 I did the "disable/enable" steps initially, and saw some success. In the end, I had to update my BIOS. Doing so actually corrected a number of issues I was having.
Unfortunately, I'm still having issues with one hub in particular (the Razer headset stand/USB hub) when the PC restarts unexpectedly (such as after a power outage). I'll have to shut down, unplug it, restart, and then plug it back I'm after boot is complete.
i thought my usb ports got messed up but this dude saved the day
"Configure a device" is not an option for me under Hardware and Sound. How do I access this option?
I also have the same problem
Just so a diffrent method
I am facing this problem after I entered my pendrive to my friends Laptop
Mine solved by porting the usb into a different port
Sameeeeee
5 years later and this still works , thanks
idk, why my laptop can do this shit. it all good and suddenly this problems happen, i think my mouse was broken but i try it on another mouse and the result still same. I do these steps and nothing fixed. Any1 know how to fix this?
How did this guy do better than Microsoft forums? Thanks.
Thank you so much, this was completely useless and a waste of time and didnt fix my issue. Thanks
Have some respect
MY GOD SAME 🤦♂️🙃
@@irescents yeah you re right...he should have some respect
True af
At least he's trying you ungrateful fuck
I respect this guy so much for finding so many different methods
Mera to yar ek bhi method kaam nhi kar rha
Thank you so much! I've been sitting on my ass the last 6 hours trying to fix an issue I recently encountered and you, you just saved me from a mental breakdown! You're a blessing in the skies
stop lying
@@chidiebubeagbahara9380 bruh why do we even need to lie?
Nice it worked for you. But mine didn't ...
When I didn't get the options on my windows 10 PC for the 1st method, I underestimated the video to be outdated but the comments pushed me to keep at it and the third method did do the job. Thanks for listing a number of methods and explaining it in an easy way.
In my case, I was trying to connect my mobile phone via a cable. None of the above methods worked, only replacing the cable! Mysterious things happen..
the
same! was just going to comment that
Same my phone charges while connected but thats it only charges.
Thanks bro you saved my time.....
Me too
sadly enough, it didn't help, but it is a very good video with a lot of very well illustrated instructions
really? method 2 helped me.
@@crjava yes non work but after restarting my phone it worked 😂
Still worked up until now. Thank you, method 2 worked really well!
You saved me...I did not even sleep the whole night ..and now in the morning after watching 100s of video I got this u just saved me ..thank you
Almost formatted my whole laptop_I was really giving up on it now, got irritated by the sound and message flashing on my screen non stop
You are a life saver🙏🏾, big ups on to you ...
Why do you have music playing at the same volume as your voice? So distracting!
Mark Subblefield it wasn’t for me
Mark Subblefield lol You must be Slow
i watched th video without the sound cuz m actually looking for a solution shit
Same pblm
enable captions
I love it how this was made in 2017, but people watch it in 2020...
Xd
@@viseyienoneikha5654 Thanks for replying by the way. :3
@@xcqe8621 gacha fans -_-
Harrr Everybody have different options and likes so if you don’t like it can you kindly fuck of? That would be nice.
Will you reply to me after 3 yrs ??
No words to say thank-you to you. It helped me very very much..... Also he sounds like Sushant Singh Rajput
You are the only person that pointed out to update "Generic USB Hub", doing this, it was able to recon the 2.0 USB hub. Thank you!
Just dropped by to say 'Thank you', your solution worked fine for me. Kept trying each solution and the 4th solution worked finally.
Well well well what do you know turns out your tutorial got me out of a tight spot. Very much needed it. Keep up with the grind.
Bro your a life saver i literally went to buy a new controller before and once i got the new one i thought it broke but it didn't so i found your vid and it works. SO NOW I HAVE 2 CONTROLLERS THAT WORK THANKS BRO!
You saved my life. I straightaway tried with method 3 and it worked. I didn't try other methods. Billions like
6 yrs later and youre still the man thanks
After 5 years and you still the man thanks alot
Thank you for this video, especially with voiced steps, it's a lot less straining to listen then it is to read. Method 2 fixed my problem, and so far file explorer recognizes and can open the usb, (honestly I had no hope of being able to fix it, because I had pulled out my usb when it was still flashing. I figured that it'd be fine because I'd done the whole "eject usb disk" thingamajig, but I was sorely mistaken), and again, thank you, you saved a good couple of artworks and songs I've made and saved on my usb. I'll try to be more careful in the future.
same
Thankyou very much. Finally, my laptop recognized again my flashdrive. What a relief.
Did it worked really ??
@@shivamgoswami1880 uu
Thanks bhai yrrr teri vedio ne meri 1month ki problem 10 min me solve krdi thanks thanks alot brooo
Dude this worked! I got a gamepad at a garage sale and it worked for about a half hour. Then nothing! Then your video and it works! Thank you!
3:39 The driver reinstallation is most likely the same thing that happens when you "scan for hardware changes" (I'll check this momentarily). No need to reboot the machine in this case, just delete the driver then scan for hardware changes.
I flashed my Redmi 9i with MediaTek Bootloader Unlock tool, it worked on my POCO M2 Device but this error came to my Redmi 9i , It did run some commands , then my Redmi 9i device just went black. Now I connect the device to USB Port then this error is coming.
None worked
I tried every step in this video multiple times and nothing worked, finally I went and unplugged and replugged every usb cord and the problem was solved. I could have saved an hour if I tried that 1st.
What did you do can you explain it to me .
I have the same problem , did everything nothing worked
Dude, I know this comment is old and that was the last thing i expected to work but you just saved my $200 headset
@Zeloz sorry I wanted to show how this saved an expensive headset?
Thank you so much!!! By the time I got to method 3, it worked! I'm still reeling from relief after 2vweeks of not been able to transfer my files. God bless you and provide solutions to your problems!!
Did it really work ???
@@salifyanji2893 yes, it did. Long time ago tho.
@@estherbeamsforaballad3342 thanks. I'm going to try this tomorrow.
Hey dear uploader, YOU ARE A LEGEND!
For who ever is reading this and has tried all 4 methods and none has worked with them then let me tell you that I have experienced the same thing until getting to the 5th solution.
what I basically did for my Dell laptop was to just literally 1) hold down the off/on button, forcing the laptop to shut down. 2) then I turned it on and as soon as it turned on I restarted. 3) After the restart I unplugged and plugged my device to see if it would get recognized... and voila! My dualshock 4 device got recognized and when I open the device manager I no longer see an unrecognized device. now I can play on my pcsx2 emulator without an issue! Thanks again uploader!
Which power supply plug to be removed in method 5? And which one to connect after PC restart?
@@ArtCulturZ power supply (in my case which was a laptop) was my charger, if you have a Desktop PC then it would be your power supply, which is the same thing to connect after PC restarts.
But try the preceding methods before you get to solution number 5, I recommend that.
@Alkhalidi44 thanks - just solved it . This time issue was different USB 2.0 vs usb3.0 ..Thanks for your reply
@@ArtCulturZ glad it worked.
When the system is powered on, the usb keyboard power indicator (Num lock) starts flickering continuously and the keyboard gets disconnected and again reconnects. This whole thing repeats again and again. What's the problem ?
Same
Loose usb port of pc or cable
it’s microsoft tech support with a yt 🖤 preciate it bro
I'd hate searching for this fix in any of Microsoft's tech support material. I don't think it's easily accessible. This dude is god.
Helped me fix my issues with my Snowball mic. Thanks a bunch!
5 years later and you’re still the man
WOW!!!!!!! YOU ARE A LIFE SAVER! I REALLY THOUGHT THAT THERE WILL BE NO CHANCE OF FIXING MY LAPTOP UNTIL I REACHED THE 4TH METHOD!!!!! I LOVE YOU!!! THANK YOU!!!
Mine case too fourth method worked
My fix was easy, I just paid 40,000 rupees to a nice man from India that called me on my telephone :-)
What currency is that
@Dev Dalal stop
@@elijahodones4375 ITS CURRWNCY OF INDIA MY COUNTRY
Thank you. Of all methods you went over, method 5 worked for me! I appreciate the vid!
You might want to make a disclaimer and say start wtih #5. That one worked for me as well
@@jasona9009 when the usb connect to pc,is after the window screen open (after restart)
Method 1 seams to have taken care of the problem. Thank you for posting!
Thank you... DEVICE MANAGER ka...ei video deke amer problem solve hoyacha
Thank you very much. Method 3 worked. I thought my older brother would scold me again because I broke his mouse. I was really crying. Thank you. Method 3 really worked. I'm happy because my mouse is fine. Thanks to you.
I even translate it in english so that you could understant. I will be careful next time.
Thaank youuu very muchhhh.
Philippines
"There you will see Generic USB Hub"
uhhhhhhhhhh
I don't see that
Huhh just go to control panel then device manager it's simple maybe he make this video about 9minutes
@@aepullfrozz2794 in new windows its different
April 2021, and still working! Method 2 worked for me! Thank you so much!
I think my problem is solved by 2 method. Didn't hurt anymore heard or seen anymore message. Thanks dude.
METHOD 2 WORKED FOR ME EVEN 5 YEARS LATER. THIS IS AWESOME THANKS
It still worked For me in 2024!!!! you are a genius bro!!!
Glad it helped
Changing the USB cable did help!!
Mine also same, Methods didn't worked. I kept on changing the USB socket again & again and luckily it started working for sometime
there isn't configure a device in my windows 10
mastan arts sane
did you guys get the answer? i have the same problem
I have win10 and I dont even have the "Configure a Device" option. :(
same :(
same
same
SAME
DID anyone figure out how to do it?
Dude wherever you are, just know that imma find you and give you a medal 👏🏽✌🏽
5 years later your still the man thanks!!!!
I tried all methods bro still problem is happening.. What to do now?
Is it solved now n how ?????? Plzz
@@sachinsharma8750 Really not sure if our issues are similar, yet we recently triggered 'Code43' while plugging the USB cord we've always used into our device. The cord side damaged the device USB plug-in port. Possibly there-in lies your cause. Bad cord, a bad port on device? The reason I suggest this is because these solutions also failed to help our dilemma as well. Good Luck!
@@rickzullifan6038code43 problem is same to me ,how can i fix now
My problem is that all of my devices(keyboard and mouse) are USB so I can't do any of these
same here ;-;
Same here
Spuddacus same
man me too
use a ps2 type keyboard and move around
Woah I thought my Thesis will be lost! Thank you very much u saved my whole life xD
It's been 3 years since this video but it helped me today on my windows 10 guys ..thumbs up
U r an angel buddy, I was kind of pissed, and was thinking what to do because nothing was working and I found your video, and now everything is working fine🙏🏻❤
it says not recognizes AND THERE IS NO USB IN MY PC
I think its dirty
@@Akira_32219 yep lmao
DEF THE SAME PROBLEM.. did you fix it??? how please tell me
@@amadheatrizza yeah my usb thingie was so goddang dirty so i just put it inside of another usb thingie
@@aarbeienmelk thanks noah it works👍 i didn't have to pay for anything so thank you
It doesn't say configure a device
Me too!!! Can't find it.
I have tried each methods but still not working my pendrive
It's showing no media in desk management help me please sir
are bhai pen drive ke hardware mai problem hai ye sab log to natak krte rhege ye krlo vo krlo kuch nhi hota isse
For those who didnt fix this problem with method 1 to 6...dont be sad, do method 7 (BIOS UPDATE) or even better get someone who knows what he is doing if you dont know how to use BIOS settings and such! Upadating BIOS should fix problems like this immediately. But...in case if that doesnt help maybe you damaged the USB port or what i saw couple of times there is always some dirt, spider webbing or even candy (YES CANDY) and stuff like that preventing PC and hardware to properly communicate. Try to clean it as careful as possible!!!
Sir i have first connected a data external drive then after that whaterver am connecting via usb ports its telling device not recognised
Bro, all my other devices are connecting except my tablet
and in troubleshooting, there is no option to configure device
That generic usb hub update is gold 🥇 .
I followed all method but not fixed my problem
Becouse you have to restart your computer
Abu Osama Naziri same
I did that still nothing
Good and simple presentation, very informative, great job guyz
All 6 methods are not working
USB firmware might be corrupted
For those who can’t fixed this i recommend you to plug your device to other computer and try reconnect it again. HOPE IT’S WORKING
pmxm__ nope
Thank you so very much! Method 2 2:57 worked for me!
Update: My USB couldn't connect to my computer again and method 2 didn't work. Instead, method 5 7:26 did.
Which power supply plug to be removed in method 5? And which one to connect after PC restart?
4:22 save for later
Thanks ,it helps
this doesnt work
When the mana floods...
How can i Fix my mouse situation WHEN I CANT USE THE MOUS
ikr
Lmao
Thank you very much. I was troubled by the loss of connectivity and your first solution fixed it. Thanks again
Turns out I had to put my plug into another port which was weird. . I wonder if the malfunctions happened because the ports weren't close enough.
Even so this tutorial was so clear and informative, and no nonesense! Thanks so much and I'm sure many others will benefit!
Thank you mate, for me worked uninstalling the driver :)
The second one worked thx I've been trying to fix this for a while
Bro I tried but still its not working 😭
Did it get fixed?
it is working..............4:16 secound.......triks......thank you....brother..........
Thanks bro your video is like a life in my lockdown when my keyboard stopped working while playing pubg... Thnks a lot brother only a gamer can understand it.. thanks a lot
This my just.ook like a video but to me it looked like gods right hand man god bless you
Bruh it can't recognize my mouse and keyboard xD
LiGTY switch out the mouse and keyboard and fix it after that
@@dawsonmeikle5580 yeah I fixed it by restarting the pc xD
Now my laptop doesnt work . . Due to the Ist method. . . What to do . Day aftr tomrw are my exams. . so this iz called uninvited problem creator
hahaha
My Problem Is Also Not Fixed Yet.
But After Reading That I Cannot Stop Laughing Don't Know Why...
@@adilmalik1232 Try mounting your USB. Your device probably recognizes it, you just can't see it however. Perhaps use a different computer to first unmount and reformat it. Then go back to your windows PC and then mount it and assign a letter to it. This worked for me
@@34521ful Much Appreciated Brother For Your Interest.
I Have fixed That Problem By Restarting My Laptop And After Some Time Usb Automatically Connects
IDK how that happened
THANKS ALOT FOR your assistance Brother
@@34521ful hello there i dont have a second pc to do what u said. is there any other solutions for fixing that problem?
5 साल के बाद धन्यवाद भाई
3yrs later and it still worked thnq bro 😊
3:22 There is Microsoft teredo tunneling adapter problem shown
You are my Hero!!
Thank you! So far so good. I had previously watched a video about doing this in device settings / USB controlers some have a power management option with the same issue he discuss in option 3. I don't know if this method solves that one as well as I had already done it. Here's the link to the other one.
ruclips.net/video/BAmZW1_As1g/видео.html
Guys before doing these all steps just restart ur mobile and check . I tried these all steps but it didn't work but then I tried restarting my phone then it worked 🙃
Thank you so much I am watching your video after 4 year☺😎😎
Dude thank you you’re the best!!
Thx you so much bro ❤
Thanks .....it's working
Thank you man!!
You are my hero
I was finding from 4-5 hours and atlast it was possible by your method thanks a ton!!
Thanks Bro! Updating All The Drivers Worked For Me !You Are A Life Saver!
Thank you so much ..i tried all the first 4 & finally step 4 worked ....thank you a ton ....it was really mind boggling & great relieve .,it's solved ...your new subscriber ...MGBU
Bro.. my mouse started working after I just click on this video no joke
Man you are the best
When I unplug the power supply then it worked perfectly
A BIG THANK YOU TO YOU. I get fixed my portable mouse issue and it's working now. Thank you so much! God bless you.
Thanks Bro 3 Years later and it works