I replaced the HDD because it was defective. Try another USB stick, preferably one that has an LED and lights up when it is recognized, because some are not recognized. Sustituí el disco duro porque estaba defectuoso. Prueba con otro lápiz USB, preferiblemente uno que tenga un LED y se ilumine cuando se reconoce, porque algunos no se reconocen.
Yes, you can do the same with an Altalink. Use the right firmware for your device. Sí, puedes hacer lo mismo con un Altalink. Utilice el firmware correcto para su dispositivo.
I used these instructions for an Altalink B8055 and was able to get it booted again. Did not require replacing the HDD thankfully. A few things to note for others is selecting to view file extensions is not necessary. I did not do DISABLE_DATA_BACKUP, but did do the FORCE_UPGRADE and the update went through fine. All the printer settings and network configuration were still the same after the update. Replacing the HDD will wipe everything because it's a new drive.
What you did was a regular AltBoot -- the video describes a Forced AltBoot... as you described, a normal AltBoot keeps all the custom settings in tact. A Forced AltBoot is only required when there are user settings (or other settings within the configuration) which are undetectable, that could be causing the system to green-screen bootloop.
thank you for your support
I dont understand how change the hard with ither hard wich hard you mean?
amigo buen dia! sacas el Disco HD o lo cambias?? porque meto el USB y realizo el proceso pero no lee el USB para instalar
I replaced the HDD because it was defective.
Try another USB stick, preferably one that has an LED and lights up when it is recognized, because some are not recognized.
Sustituí el disco duro porque estaba defectuoso.
Prueba con otro lápiz USB, preferiblemente uno que tenga un LED y se ilumine cuando se reconoce, porque algunos no se reconocen.
altalink B8055 new hard disk not booted any solution
Poscode on sbc?
Sbc code 6 number show
DA ALTALINK C8145 É MESMO PROCEDIMENTO? OBRIGADO
Yes, you can do the same with an Altalink. Use the right firmware for your device.
Sí, puedes hacer lo mismo con un Altalink. Utilice el firmware correcto para su dispositivo.
I used these instructions for an Altalink B8055 and was able to get it booted again. Did not require replacing the HDD thankfully.
A few things to note for others is selecting to view file extensions is not necessary. I did not do DISABLE_DATA_BACKUP, but did do the FORCE_UPGRADE and the update went through fine.
All the printer settings and network configuration were still the same after the update. Replacing the HDD will wipe everything because it's a new drive.
What you did was a regular AltBoot -- the video describes a Forced AltBoot... as you described, a normal AltBoot keeps all the custom settings in tact. A Forced AltBoot is only required when there are user settings (or other settings within the configuration) which are undetectable, that could be causing the system to green-screen bootloop.