*This battery reconditioning program exceeded my presumptions. It worked on any drill battery, several AA and AAA batteries, **batery.repair** and any camera battery. The steps are simple and the act itself is exciting to do. No matter what type of battery you`ve got, it is sure to function again!*
Clever use of the base section of the battery to finish off the battery connector, made it look more professional than some of the commercial offerings
Why there so much hate? Yes these aren't super useful and the soldering technique could be better but al least he can ACTUALLY solder and yes these are somewhat useless but this guy is a genius and I hope he sees this. NewKew I'm an 11 Yr old minor Electronic Engineer from Australia and I looked up to you and what you did and you are amazing and if you see this please respond and don't listen to those horrible haters plz make more videos like this. Thanks so much! From me in Australia😊
that moment when your stuck on a island with only 9 volt batteries! build a gaming console out of them!😸 thanks man this video was great and i look forward to more!!
Your right i am 15 yers old and i know how to solder ,cut, drill,and a lot of eletronics that i learn by my self and in my class anybody nows how to do it sorry for my bad english :)
***** I don't want those motors, I just never saw them blue. I'd preffer more especific motors, that are much better. 9v's don't last that much in my experience
There's a lot of them each have the same dimensions, but they has "caps" in different colors (I've seen white, red, yellow, blue and black). I've no idea if the colors mean something like the voltage or something.
what size is the small LED ? It has to be able to take the 9 Volts DC battery ! You must also know what wires to connect to the resistor wire. Plus or minus, Gold wire side to plus ? Or it will burn out fast ! Or almost as soon As you connect the battery. Do you have a wiring diagram for us ? Thanks, it would really help save LEDs .
^ This is why I don't like these types of channels and videos. It's so easy to make a mistake without more information. If you're going to "teach" someone these projects actually teach them! For example, what voltage was the motor rated at? What was the forward voltage of the LED? Why choose a 1K resistor? If you don't answer these questions for people they might end up making something that doesn't work and be put off becoming a maker in the future. Also, his soldering technique was wrong; the solder joints were 'dry' because all of the flux had evaporated. However, I do encourage people to make videos teaching others how to make things for yourself. It's just that sooooooo many channels do it badly.
Yes , these guys really leave out a lot of important info ! But you-tube doesn't care. People can get burned and hurt too. All the important info is missing. Polarity, proper plus and minus alignment and more! Everyone is an expert so it seems on here. Freedom to screw up is the norm, but no one is screening these clowns ! FYI
TBH, NewKew you deserve way more subs i've been subbed for a week and i am absolutistly astonished its crazy what you can make maybe u can make a little helicopter
U r amazing,if u keep on making videos like this one so I know u can easily get the RUclips play button but I know video making is not easy coz I also have a channel
1.5V is below the limit for most LEDs. You need 2.6-3.6V depends of the LED type. Usually, all will light up on 3V, even those made for 2.6V (but not to power them for a long time).
Dude, you need to invest in a pair of wire cutters and learn how to solder. You heat the connection and apply solder to the heated connection, not blob it on the iron and smear it on the cold connection.
Rich Booth Well... It depends. Because there are some components that if you heat them you destroy them. Some small switches, for example. The same with lithium batteries (18650). It's too dangerous to heat them.
The soldering "technique" couldn't be worse, all of those joints are "cold joints" to get solder to adhere properly you NEED to have both the wire/component and the other part to get to the melting point of solder and NEVER let them move while cooling. A good joint will be shiny and not a dull grey like the idiot in this video made them. This must be the first time he ever picked up a soldering iron. If not, that is truly sad.
The method he uses can result in cold solder joints. You always heat the material first, then apply the solder. He might want to take a quick refresher course in soldering,
cool projects, horrible soldering. better to solder than not at all thogh! iv seen soo many people just twist wires together and call it a day. admittedly as a child that didn't have access to the tools. i did it frequently and was always a failing point of my projects.
Assuming a 3 v LED and an alkaline 9 V battery which has a capacity of 550 mAh: The current will be: (9 V - 3 V) / 1000 ohm = 6 mA. The time will be: 550 mAh / 6 mA = 91,7 h
*This battery reconditioning program exceeded my presumptions. It worked on any drill battery, several AA and AAA batteries, **batery.repair** and any camera battery. The steps are simple and the act itself is exciting to do. No matter what type of battery you`ve got, it is sure to function again!*
Clever use of the base section of the battery to finish off the battery connector, made it look more professional than some of the commercial offerings
Thank you so much for your comment :D
Love the flash light hack, but dam that soldering technique made me wince
Cringe works too ;)
Geweldig,hier heb ik zo lang naar gezocht
Echt hartstikke bedankt
Good idea. But a miniature switch can be added in between plastic sheet and connector, to make it more useful.
Why there so much hate? Yes these aren't super useful and the soldering technique could be better but al least he can ACTUALLY solder and yes these are somewhat useless but this guy is a genius and I hope he sees this. NewKew I'm an 11 Yr old minor Electronic Engineer from Australia and I looked up to you and what you did and you are amazing and if you see this please respond and don't listen to those horrible haters plz make more videos like this. Thanks so much! From me in Australia😊
first and good video
:D
+Mauritius creativity I like ur use fan
You just found really inconvenient ways to power, connect, and make things.
I like your videos :D
Thank yo so much :D
👈👉 Very Useful Life Hacks . . . Thanks :)
Awesome Bro,,, but soldering is tough
Never thought about making a connector. Thanks.
Your Welcome :D
Yeah man, that connector hack is incredibly useful
9v connector is selling
Hahaha....so cute.... Where did I get this kind of battery and a mini machine motor????
Awesome life hacks but you soldering techniques could be better otherwise great video
I love all these videos
what brand of battery did you use because i cant get a battery with a metal surrounding that i can peel off
I love your video
Thank you so much for loving our video :D
am also
+MsGear I think you meant "I love your videos as well".
Cheers mate the 1st one was very useful to me🙂👍
Thank you so much for your comment :D
+NewKew I like ur vids so I made one for meh self
plz subscribers my Chanel
+NewKew plz subscribers my Chanel
+Tarikul Islam stfu 9 year old why would he subscribe to your channel?
brilliant hacks wouid love to see more vids like this you are a genuis
Thank you so much for your compliment :D
where did you get the blade ?
from another cooling fan that ran on a battery in the first place ?
You have owned internet..!!! :D
Thank you so much for your comment :D
that moment when your stuck on a island with only 9 volt batteries! build a gaming console out of them!😸 thanks man this video was great and i look forward to more!!
These are things that kids need to learn in schools.............
Your right i am 15 yers old and i know how to solder ,cut, drill,and a lot of eletronics that i learn by my self and in my class anybody nows how to do it sorry for my bad english :)
:D
In my class we made an audio amp
+Gavin Chapman yeah but it sucks cuz it uses 9v batteries and they are expensive in mah country :(
+Luca Della Bonzana In mine 9v are also expensive
At 4:25, where did you get that 130 motor from? Even though the other ones were quite nice the last hack is bad, as the 9v won't last long.
*****
I don't want those motors, I just never saw them blue. I'd preffer more especific motors, that are much better. 9v's don't last that much in my experience
There's a lot of them each have the same dimensions, but they has "caps" in different colors (I've seen white, red, yellow, blue and black). I've no idea if the colors mean something like the voltage or something.
I loved the 9v battery fan
what 9v batteries are those and where can I buy them?
holy crap! Thanks so much dude, very useful. Liked & Subbed !
the last one was really cool
Thank you so much for your compliment :D
yeah i agree
Creative work nice
your good professor. .. thanks. thanks
Please tell me how many websites that you are sharing your youtube videos? Like Instructables
Thank you so much for your comment :D I don't share any where :)
what size is the small LED ? It has to be able to take the 9 Volts DC battery ! You must also know what wires to connect to the resistor wire. Plus or minus, Gold wire side to plus ? Or it will burn out fast ! Or almost as soon As you connect the battery. Do you have a wiring diagram for us ? Thanks, it would really help save LEDs .
^ This is why I don't like these types of channels and videos. It's so easy to make a mistake without more information. If you're going to "teach" someone these projects actually teach them! For example, what voltage was the motor rated at? What was the forward voltage of the LED? Why choose a 1K resistor? If you don't answer these questions for people they might end up making something that doesn't work and be put off becoming a maker in the future.
Also, his soldering technique was wrong; the solder joints were 'dry' because all of the flux had evaporated.
However, I do encourage people to make videos teaching others how to make things for yourself. It's just that sooooooo many channels do it badly.
Yes , these guys really leave out a lot of important info ! But you-tube doesn't care. People can get burned and hurt too. All the important info is missing. Polarity, proper plus and minus alignment and more! Everyone is an expert so it seems on here. Freedom to screw up is the norm, but no one is screening these clowns ! FYI
It's a 3,6 standard Led.(You can take one from H4 lights or take 10 of theese from Amazon at €2.)
With a 1k Ohm resistor it can be used on a 9v battery. You can also use three of it in an in-series circuit👍
what the h is an E2 ?
I did the first and second hacks. on the second hack I never thought of using the bottom part as a cover I usually just load it with hot glue.
:D
this guy is awesome this will really come in handy
nice job keep up the good work
Thank you so much for your compliment :D
Hello new kew this was a great video
Thank you so much for your compliment :D
@@NewKew1 I proud of you new kew
TBH, NewKew you deserve way more subs i've been subbed for a week and i am absolutistly astonished its crazy what you can make maybe u can make a little helicopter
Thank you so much for your compliment :D
good video👍👌
Thank you so much for your compliment :D
Ok thanks😀
where did you get that fanblade?
Awesome ideas
Thank you so much :D
Sorry But Where I Can Buy Engine Like On Your Video
Thank you so much for your comment :D You can get it from dollar store :D
you're my best youtuber
Thank you so much for your compliment :D
;)
Bro u are awesome 3 of them was useful to me!!
nice I like this video
U r amazing,if u keep on making videos like this one so I know u can easily get the RUclips play button but I know video making is not easy coz I also have a channel
Thank you so much bro :D
where to buy that yellow Fan??
okay thank A lot
which country you are from can you tell me???
Thank you so much for your comment :D I'll let you know about this in future :D
You only one can made this conector perfectly
Good video
Thank you so much for your compliment :D
NewKew you're welcome :)
Where did you get the soldering iron tool
Thank you so much for your comment :D You can get a soldering iron tools from dollar store :D
I wnat to do the same thing you do
Thank you for sharing these great tips.
Wow! Nice hack
1 huge reason not to use one, and instead just use 6 aa in a battery holder (with a way longer life span)
IT HAS HUGE VOLTAGE SAG!
+neur0n No, when the battery's are parallel connected the voltage will be the same, when you connect them in series the voltage will be 9v (6*1,5v).
+neur0n 6 aa's stacked is still better than a 9 volt
awesome and cool hacks
:D
i want to know how to find the amphere hour of any alkaline battery because it's not written on it.
from can i get 9v connector?
What's the use of resistor in the 1st one???
voltage of 9 v battery is too high , resistor regulated the flow.
voltage of 9 v battery is too high , resistor regulated the flow.
I guess 1.5v doesn't have enough current!
1.5V is below the limit for most LEDs. You need 2.6-3.6V depends of the LED type. Usually, all will light up on 3V, even those made for 2.6V (but not to power them for a long time).
NewKew i can’t find the music Fun & Undeniable
can u give me the link ?
Kya 9volt battery charge ho sakti hai
Dry solder joints omg! Where the hell did u learn to solder like that?
can we use 9v battery for 3v motor?
Thank you so much for your comment :D Yes :)
glad to see someone as sloppy ns me...great idea anyways
Can't we just place LED to +ve and -ve directly
cool video
keep it up
good videos
Thank you so much for your compliment :D
Dude, you need to invest in a pair of wire cutters and learn how to solder. You heat the connection and apply solder to the heated connection, not blob it on the iron and smear it on the cold connection.
My thoughts exactly. Nothing but cold solder joints.
I was amazed the scissors actually cut the wire
Yeah and if u put it on the iron first it burns of the flux witch is needed to make the solder stick
Rich Booth сметаны. Маууууввввссммм.
Rich Booth Well... It depends. Because there are some components that if you heat them you destroy them. Some small switches, for example. The same with lithium batteries (18650). It's too dangerous to heat them.
Great job
I couldn't help myself but to sub to this ch.
that fan and wire (2) is so usefuli can put it under to my laptop
yeah make a stand first :D
that is so cool !!!
i like the 3rd one
Nice tips :) You soldering techniques could be better ;)
The soldering "technique" couldn't be worse, all of those joints are "cold joints" to get solder to adhere properly you NEED to have both the wire/component and the other part to get to the melting point of solder and NEVER let them move while cooling. A good joint will be shiny and not a dull grey like the idiot in this video made them. This must be the first time he ever picked up a soldering iron. If not, that is truly sad.
shut up he used a soldering iron in many videos before
The method he uses can result in cold solder joints. You always heat the material first, then apply the solder. He might want to take a quick refresher course in soldering,
MES, That statement is only proving Peter's case.
Yeah, I'm not solder master and have only down it a few time but this was still hard to watch.
Good work
I likr your video
so amazing channel I love this channel thanks for everything what you thaugt me
Thank you so much :D
Can someone please send me a link to the second song. I can't find it anywhere
Awesome
:D
hey bro good idea
Thank you so much :D
GOOD GOOD GOOD THANKS
Where did you find the fan
That's pretty neat. I like your ideas.
I subscribed to u :)
Thank you so much for subscribed to our channel :D
Thanks for sharing
Can you make links for parts Please ?
Thank you so much for your comment :D you can get all of them from dollar stores :D
BUENA IDEA..............
Thank you so much sir :)
Subscribed
Thank you so much for subscribing our channel :D
Your first thing 3v light 9v battery and you use regestor that will hot early you have to use some more regestor by pereral sistum
Cool!👍👍
cool projects, horrible soldering. better to solder than not at all thogh! iv seen soo many people just twist wires together and call it a day. admittedly as a child that didn't have access to the tools. i did it frequently and was always a failing point of my projects.
u always put the name of music that u use thank you !
Im polish your tips cool
Very Kool
u misspelled. it "Beary kewl"
Bahi bettery kharab q kartay hoo bettery ka connecter lay lo
Which battery is this
gostei, nunca tinja pensado em fazer isso
:D
GOOD WORK
Thank you so much :D
you can made a 9v battery
How long is LED shining?
Assuming a 3 v LED and an alkaline 9 V battery which has a capacity of 550 mAh:
The current will be: (9 V - 3 V) / 1000 ohm = 6 mA.
The time will be: 550 mAh / 6 mA = 91,7 h
cool video☺☺☺
Can jump start car by 2 battery????
manthan solanki .....is great ayam gugart se
waw very good
Thank you so much for your comment :D
+NewKew where you get dc motor vs fan
from dollar store like ebay :)
+NewKew thank you
Your welcome :)