This has been very informative thanks. My Merc 2000 e430 ABS, and other warning lights come on ( only when I have turned on at least parking lights ) after a few minutes. Upon restarting the engine, the lights are fine. There is no interruption of ABS or otherwise operational support services while driving. just that the ABS lights will come on if I turns on my lights. I have not studied the electrical system yet.
J'ai eu le même problème sur Mercedes classe c 250 TD w202 . Pendant longtemps les 3 voyant (abs etc et frein à main) s'allument de temps en temps mais depuis une semaine sont allumés en permanence plus pas de compteur de vitesse la galère j'ai presque tout vérifier enfin j'ai démonté le capteur de pédale de frein et j'ai trouvé les contacts intérieur charbonné.j'ai nettoyer avec papier abrasif fin . Tout les voyant son éteintes et la vitesse refonctionne parfaitement. Voilà pour aider certains intéressé franchement une très belle caisse dieu merci beaucoup
Just did this to my 1999 c280. The hardest part was removing one of the plugs from the switch. I found it easiest to twist and remove the old one then remove the two plugs on it. The switch that came out had the plunger only going out a little bit compared to the new one. So I am confident that was the issue.
W208 here clk430 2002. So my brake lights don’t work at all. Signals work, running lights work but no brake pedal lights. Did this solve the problem in the rear with the tail lights?!
Hi I have a issue in my w202 abs light is on 1) If the car stop the engine for 2 to 3 hours ans start abs light is on. 2) Once I see these lights, I let the engine run for 1-2 minutes, then turn off. 3) Then I restart the engine again, the lights off with No malfunction. 4) After this, these lights won’t light no matter how long you drive and how many times you start the engine. I have tried reset the sensor by turning left/right on wheel for a few times, the same situation re-appear above.
That's what mine did at first. Next time the lights are on dash have someone stand behind ur car and check to make sure brake lights are working... if they do not work this switch is bad
This is what I read somewhere; If the BAS/ASR or BAS/ESP malfunction indicator lamp comes on permanently while the engine is running, a malfunction has been detected in either system. As a result, it is possible that now only partial engine output will be available, and pressing the accelerator pedal will require more effort. If the BAS malfunctions.
Front Line Media really. I can’t remember if my part was or not. I sold the car shortly after to buy a 2000 e430. I’m sure I will need to replace the switch again because I periodically get the BAS and ESP warning on this new e430 But the lights go out usually after a minute or so. We might should stock up on these parts.
@@JoesGoldenGarage first my cruise goes, then the brake light stays on, sometimes can't get out of park without manual over ride. Once the vehicle accelerated out of control when I stepped on the brake, that was alot of fun. I have a Sprinter
This has been very informative thanks. My Merc 2000 e430 ABS, and other warning lights come on ( only when I have turned on at least parking lights ) after a few minutes. Upon restarting the engine, the lights are fine. There is no interruption of ABS or otherwise operational support services while driving. just that the ABS lights will come on if I turns on my lights. I have not studied the electrical system yet.
J'ai eu le même problème sur Mercedes classe c 250 TD w202 . Pendant longtemps les 3 voyant (abs etc et frein à main) s'allument de temps en temps mais depuis une semaine sont allumés en permanence plus pas de compteur de vitesse la galère j'ai presque tout vérifier enfin j'ai démonté le capteur de pédale de frein et j'ai trouvé les contacts intérieur charbonné.j'ai nettoyer avec papier abrasif fin . Tout les voyant son éteintes et la vitesse refonctionne parfaitement. Voilà pour aider certains intéressé franchement une très belle caisse dieu merci beaucoup
Giving this a try later this afternoon, thanks for the video!
THANK YOU. I thought I was gonna have to pay a mechanic a bunch of money. I can totally do this.
Oh yeah. Easy stuff sorry so shaky. But it’s in an awkward spot
Same here
Just did this to my 1999 c280. The hardest part was removing one of the plugs from the switch. I found it easiest to twist and remove the old one then remove the two plugs on it. The switch that came out had the plunger only going out a little bit compared to the new one. So I am confident that was the issue.
Banditt that was a good idea. I never thought of that. It would be easier.
Was that the issue?
Thanks very much friend. Very informative. 😊
You did a good job 😇
Thanks for the video Just installed one about two months now on my 99 e430 have to replace it again whats up with that must be aftermarket sucks. 😕
Fresh4u305 Graphics thanks for watching man. Appreciate that!
I have the same problem on my sprinter, keeps failing
I’m wondering.. I tried this and have the same lights??
Any ideas appreciated to turn mine off. I need to check bulbs still
Extremely helpful thank you!
Thanks for the effort!
I have a problem with my gear is not selecting gear when driving
Mine only has 1 connecter but new part has 2 like in video please advise
Thank you so much sir.
Glad to help
Did it stop the lymp mode?
Should I disconnect the car battrey first??
W208 here clk430 2002. So my brake lights don’t work at all. Signals work, running lights work but no brake pedal lights. Did this solve the problem in the rear with the tail lights?!
Yes
Thank you sir
Hi I have a issue in my w202 abs light is on
1) If the car stop the engine for 2 to 3 hours ans start abs light is on.
2) Once I see these lights, I let the engine run for 1-2 minutes, then turn off.
3) Then I restart the engine again, the lights off with No malfunction.
4) After this, these lights won’t light no matter how long you drive and how many times you start the engine.
I have tried reset the sensor by turning left/right on wheel for a few times, the same situation re-appear above.
That's what mine did at first. Next time the lights are on dash have someone stand behind ur car and check to make sure brake lights are working... if they do not work this switch is bad
where can i found this chip
How much was the plug and where did you find it
Trevor P eBay. It was 10-20 bucks.
What's the mening of BAS
BAS(Brake Assist System)
Hi, can abs/bas lights affect acceleration?
It can throw the transmission into limp mode. Second gear only
@@JoesGoldenGarage its a manual transmission, w202 c230k, since the lights came on i have also noticed a little loss of take off
Now THAT is a new one for me. I do not have a clue
This is what I read somewhere; If the BAS/ASR or BAS/ESP malfunction indicator lamp comes on permanently while the engine is running, a malfunction has been detected in either system. As a result, it is possible that now only partial engine output will be available, and pressing the accelerator pedal will require more effort. If the BAS malfunctions.
@@ngangamuhia3846 makes total sense, thank you
Thank you
Why do these switches keep failing? I have this failing on my sprinter constantly
Front Line Media cheap ass parts
@@JoesGoldenGarage last 2 were Mercedes
Front Line Media really. I can’t remember if my part was or not. I sold the car shortly after to buy a 2000 e430. I’m sure I will need to replace the switch again because I periodically get the BAS and ESP warning on this new e430 But the lights go out usually after a minute or so. We might should stock up on these parts.
@@JoesGoldenGarage first my cruise goes, then the brake light stays on, sometimes can't get out of park without manual over ride. Once the vehicle accelerated out of control when I stepped on the brake, that was alot of fun. I have a Sprinter
Front Line Media I have always wanted to drive a sprinter. Is yours the 3.0 diesel?
thank you sir