But in the case of the Tapered section we can't use this select command as my understanding because we play with the diff dimensions of one selected member
Yes, for tapered section, optimization or section selection process is not available. It is available only for uniform profile sections, including built-up section with uniform profile.
Hii suro Nice explanation Please add this points in next session 1. How we will use Box section properties by using 'select' command 2. Can user table sections will used for for fixed group 3. How we can use "personal section data base " for select/select optimise command 4. Is any provision for tapered section optimization tool in staad Hope so you will cover this in next session 👍
Thanks for your suggestion Ganesh. I have already planned to include point 1 to 3 in the third part of this series and then I will post multiple videos on Tapered member design. In next part, I will cover the correct sequence of different design and analysis commands along with few other major points for optimization.
Last year I delivered a webinar session on Physical modeler which you can access from the following link -- ruclips.net/video/YVi5SnkWB1I/видео.html&ab_channel=BentleyStructural Also, we have posted few tutorial videos in this channel recently. You can check those for more information.
@@surojit_ghosh thank you sir, you really are doing a great job that too in this situation around the world. Most of the engineers who couldn't explore the things earlier can learn something from your efforts. Thank you sir
If you define a tapered section from Define >Tapered I option, then that section cannot be optimized using SELECT command. But there is a trick for section selection with custom shapes which I will discuss in the next part of Steel Optimization series.
Not sure which videos you are referring to. If you are looking for videos related to optimization, those are not published yet. Part 2 covering "Design Command Sequence" will be published this week. You can subscribe to my channel to get more updates about this. For other videos related to Steel Design, you can go through the video list/playlist published in my channel -- ruclips.net/channel/UC5egRe03ptPeEdeiRve2DlQvideos
I am a bit confused with your query. I have assigned fixed support in this model, not sure where you noticed pinned support. Also pin support is very common for any steel structure, infect pinned base plate is commonly used in several projects rather than fixed base plate due to several advantages.
![Natanael Cano x Nueva H - Amapola [Official Video]](http://i.ytimg.com/vi/6Q4mnRD5jCw/mqdefault.jpg)
Hello Surojit i dont see this video of Design Philosophy which you have mentioned in the video
same here cant find design philosophy..... 😒
Hello Surojit,i can't find those chapters in your channel,may you help me with a link
Which chapters? About Steel optimization? You can check this link for the entire series -- ruclips.net/p/PLxLi_mmlPeipFQH_YOTTeG9waqeX9CZKN
@@surojit_ghosh Design philosophy chapter
But in the case of the Tapered section we can't use this select command as my understanding because we play with the diff dimensions of one selected member
Yes, for tapered section, optimization or section selection process is not available. It is available only for uniform profile sections, including built-up section with uniform profile.
Hii suro
Nice explanation
Please add this points in next session
1. How we will use Box section properties by using 'select' command
2. Can user table sections will used for for fixed group
3. How we can use "personal section data base " for select/select optimise command
4. Is any provision for tapered section optimization tool in staad
Hope so you will cover this in next session 👍
Thanks for your suggestion Ganesh. I have already planned to include point 1 to 3 in the third part of this series and then I will post multiple videos on Tapered member design. In next part, I will cover the correct sequence of different design and analysis commands along with few other major points for optimization.
Sir, can you please share a video on modelling a structure from basic in staad pro physical modeller.
Last year I delivered a webinar session on Physical modeler which you can access from the following link --
ruclips.net/video/YVi5SnkWB1I/видео.html&ab_channel=BentleyStructural
Also, we have posted few tutorial videos in this channel recently. You can check those for more information.
@@surojit_ghosh thank you sir, you really are doing a great job that too in this situation around the world. Most of the engineers who couldn't explore the things earlier can learn something from your efforts. Thank you sir
Thank you very much sir hatsoff to this explanation
Nice to hear that you liked this video.
Sir will the select, select optimised command work for tapered sections?
If you define a tapered section from Define >Tapered I option, then that section cannot be optimized using SELECT command. But there is a trick for section selection with custom shapes which I will discuss in the next part of Steel Optimization series.
great tutorial sir.
how do iget your other vedios
Not sure which videos you are referring to. If you are looking for videos related to optimization, those are not published yet. Part 2 covering "Design Command Sequence" will be published this week. You can subscribe to my channel to get more updates about this. For other videos related to Steel Design, you can go through the video list/playlist published in my channel -- ruclips.net/channel/UC5egRe03ptPeEdeiRve2DlQvideos
It is a steel structure why you consider pinned support???
I am a bit confused with your query. I have assigned fixed support in this model, not sure where you noticed pinned support. Also pin support is very common for any steel structure, infect pinned base plate is commonly used in several projects rather than fixed base plate due to several advantages.