Tekno SCT410 2.0 Track Footage
HTML-код
- Опубликовано: 16 окт 2023
- Full SCT410 2.0 Video: • The BEST 4X4 Short Cou...
SCT410 2.0 Kit Product Page: www.amainhobbies.com/tekno-rc...
For all of your RC needs visit AMain Hobbies: bit.ly/XcAuJr
Follow us on Instagram: / amainhobbies
Like AMain Hobbies on Facebook: / amainhobbies
Follow @AMainHobbies on Twitter: / amain_com 
Развлечения
Just got mine built yesterday. Have raced the .3 for 7 yrs. What I noticed on your laps is. Get the momentum you need to make the jump. Let off at the lip of the jump. That will settle the SCT down and it will allow the rear to raise up. Which will stop the nose diving and the front to not raise up in the air. Its raising up cause you have to much throttle. Try it and you and other racers will thank me. SCT is my bread and butter. Love my EB48 2.1 and ET48 2.0.
Ok, I'll try that, thanks. Do you think cutting air vents/holes into the body is needed? It benefited 2wd but thought maybe the 4x4 was heavy enough for it to not matter.
-Brett
@@AMain_Hobbies_2 oh for sure. Cut out vents that is recommended and definitely add the air guards. The body is good.HF2. Will say I've been really happy with the Losi body. My go to for 5+ yrs was the JC F250 HD body but they're discontinued.
Is there any chance you can tell me if the spektrum 3200kv motor fits in this truck? I'm hoping to transfer the electronics from my vorteks into one. It looks like it could handle the power way better while being 10x as durable. Vorteks lives on the bench most of the time. Lol
Yeah, that should bolt right up! The Vorteks 3S BLX motor and ESC would be a good fit in this truck for 2S and 3S use.
-Brett
Awesome, thanks for the reply!@@AMain_Hobbies_2
What pinion and spur gear are you using.?
Stock spur with a 20T pinion I believe.
-Brett
looks like a 4wd slash
Not even close. SCT410 2.0 is a whole different animal and platform
What electronics is that running?
We used this Hobbywing Max 10 Motor/ESC unit: www.amainhobbies.com/hobbywing-ezrun-max10-g2-140-amp-sensored-brushless-waterproof-esc-3665sd-hwa38020343/p1455071
That 2400kv motor makes the system 2-4S compatible.
Also used the aluminum cased Ecopower 250T servo: www.amainhobbies.com/ecopower-wp250t-brushless-waterproof-high-torque-metal-gear-servo-ecp-250t/p1466471
For battery, it was a 3S Gens pack; I think this: www.amainhobbies.com/gens-ace-3s-lipo-battery-60c-11.1v-5500mah-gea3s550060e5/p1336149
-Brett
@@AMain_Hobbies_2 I'm also intrigued by the 2-4s capable HW2400Kv. I would assume a smaller pinion gear would be necessary if I wanted to race it versus bashing it? Thanks, and I truly appreciate the effort you guys put into your videos!
@@davidconaway2830 Yeah, it would require some gearing changes to race. I believe 4WD SCT race on 2S so I'm guessing you'd want to gear up.
It's a good ESC/Motor combo though.
-Brett
@AMain_Hobbies_2 Thanks Brett!
@@davidconaway2830 I ended up going with the Hobbywing XR8 Pro G3 and HW3660 4300KV on 16T pinion for my SCT410 2.0 race truck for next season. Amazing combo
This is a cool truck but that $1000 price tag is insane.
It's 469
@@Rob-tl9md plus motor esc transmitter servo battery and a body. Easily $1000. $469 is just the roller
@@davidgoodrich1258 yea? its a pro grade roller. That is what they are. esc and motor is 250 for hw and body and tires are maybe 120.
The initial investment to buy electronics can be expensive, but once you have them, you can transfer them from kit to kit. If you're just starting out and need every component, it's pricey, but for those that already have electronics, buying the kit alone isn't too bad.
-Brett
get ya money up not ya funny up