Это видео недоступно.
Сожалеем об этом.
CFMOTO CFORCE 800 Full Service How to Change Oil, Diffs, Transmission Fluid, Air Filter Upgrade
HTML-код
- Опубликовано: 15 дек 2020
- In this video we show you the right way to fully service and care for your CFMOTO CFORCE 800. This goes for everyone with the 2021 model, 2020 and 2019 model. We show you how to change the engine oil and filter, how to change the Diff fluid, and transmission fluid. As well as how to grease and lube the entire unit and how to care for your fuel system and Air Filter. We also discuss the air filter upgrade and the proper way to clean and oil your Uni Air Filter.
You can order your MSC Oil Change Kit by calling 662-438-6407 during Business hours.
Or you can visit the Website at www.mainstreetcycle.com
If you enjoy our videos and want to help support this channel please click this link:
/ realtalkpowersports
Check out the page and I encourage you to watch the short video that you will find on this page and check out some of our goals and benefits of becoming a Patron for the channel! Yall are Awesome!
If you want to see what CFMoto has to offer subscribe to our channel.
Also go check out Main Street Cycle @
www.mainstreet...
Also Visit their Facebook Page @
/ mainstreet.cycle
God Bless!!!
#CFMOTO #CFMOTOUSA #MainStreetCycle
dude you Rock, you don't have to do this. this is why I don't mind spending the extra money with the ppl you represent and support your channel thanks again.
Probably get a lot of slack on this comment, but as an old mechanic it pleasing to see a young man not have to put on a pair of latex gloves to change the oil. As a bonus loved the carburetor cleaner hand cleaner. Nice job on the videos. Giving me more confidence on the CF product.
Thanks for answering the questions everyone else seemed to be dodging.
Great video! How about doing a video about adjusting the valve lash for all the dyi guys. Thanks man, keep up the great content.
Love all your videos great video on servicing the 2021 800 xc. On the rear DIff. the Canadian model comes with a dipstick to check oil level in your tool kit. You only put in 400 ml (13.5 oz) in DIff. You insert dipstick fully into hole and level should be between upper and lower marks. If you over fill could leak out vent tube or cause rear DIff. axle seals to leak. Normally I would fill to bottom of fill hole. When I was checking mine for first time I thought it was low. I found the information on page 120 in owners manual under maintenance. I don’t know if the US model is the same. Just thought I’d let you know before anybody has seal and vent tube leaks. I think I’m still gonna fill up to the bottom of the fill hole and we’ll see if it leaks out the vent. Pretty sure the seals won’t fail. And more oil not less it’s better for cooling.
I just bought a slightly used 2022 CFMoto 600 yesterday. First quad and I’m a bit overwhelmed but I’m glad I can see your video and reference so when I’ve broken it in a bit, I can keep it clean and running healthy for as long as possible. Thanks for the vid!
I actually do this for a living also I work at cycle Marine in Arkansas. It neat too watch these videos for me because I even learn from them even tho I do this everyday also. I never thought of picking up the unit with our fork truck definitely leaned easier ways too service our units!
OSHA Standard 29 CFR 1910.179(n)(3)(vi) states, “The employer shall require that the operator avoid carrying loads over people.” This is required to protect people from the hazard of a falling load due to inadvertent failure of the crane mechanism or operator error. Because it's against OSHA. No-one should ever be under a suspended load of a forklift.
Glad to still come back to your channel when I need a reference and you're still cranking out great content
💪 thank you
I torque my wheel lug nuts at service intervals as well. I use WD-40 Dry Lube on all moving components as it doesn’t hold dust & dirt.
I just bought a CForce 800 and will be ordering the full service kit soon. Thanks for this great video and I will definitely patronize you folks!
Awesome Ken!! Glad it was helpful
Super helpful video, I would be lost without it… great job!
Thank you!!
What a great Video, these two guys really care, about what there doing. Thank you for showing all the great details, appreciate this!
Thanks Blake! All Canadians thank you!
💪
Nice job on the video! Really appreciate you doing these videos for us! I love being able to do my own maintenance on my 800 zforce and cforce 600 touring.. Keep up the great videos! Thanks again
Děkuji za video.Uz vím jak vyměnit olej u mé čtyřkolky(miláčka). Zdravím vás z České republiky 👍👍👍
Thanks for the videos guys.......these sure help new owners know the locations of the maintenance items. Thanks and blessings
Really helpful video. I wasn't 100% if the dipsticks needed to be threaded in or left out to get an accurate fluid level. With the oil it's a difference of half, screwed all the way in it looks full and out it looks only half full. My 800 is brand new and when I slam on the breaks I get a beep from the oil pressure sensor. I'll have to top the oil off. Hopefully I won't get that beep any more.
Did this stop the beep? i heard you have to send ecu back to cfmoto to get fixed. I have a new 2022 800xc with this issue currently
Great video! I'm getting ready to purchase a 600 Touring. This was a perfect video for DIY people like myself.
Just one suggestion if i may. The young man Joel might want to wear gloves in the furture. All the chemicals are absorbed through your skin into your body. When you get older you will have a much higher chance of cancer.
Just a suggestion from one mechanic to another.
What spray oil is he using?
Awesome video. I absolutely hate how hard it is to get that air filter box on. I haven't figured out yet how to get my hand in that space to easily snap those clips.
Brilliant video, I look forward too servicing my bike now. Love the attention to detail. 👍👍
Thanks!!
Love your videos!
All the info you need is in there
I was in the process of texting how often do we need to change transmission fluid and it came on the video during my question.
Thanks again
Thanks! Been drewling over these Cryptids for months now but a bit scared they are hell on asfalt since here in Germany offroad riding is illegal. So we have to ride long stretches over asfalt to get to the offroad parts where cops can’t come easily.
Nice video Guys,
Greetings from Germany!
Great video. Just picked up a 2021 Cforce 800Xc. first ride around the area was nice for the break in. a few more of those and cant wait to let her rip..
great video. what kind of spray you use on the moving parts? can i use crc or wd40?
Another great video by real talk powersports
You are the reason I bought a cforce 800 2 months ago. Why did you remove your fender flares? I know why the baffle is gone, mine is too :)
Love the videos, Thanks.
I removed them to fit my 30 inch cryptids.. and I like the look
Thanks, this is a big help
No problem brother
Thank you for the great video! Very informative for the do it yourselfer
Glad it was helpful!
Love your videos. Im gonna buy my first ATV in a couple of days thanks to you actually. I have been watching your videos and you are awesome. I have one question, Is It the same procedure on a cfmoto cforce 850xc?
Thank you very much! And yes it will be the same procedure
Great vid, that upgraded skid really makes it a pain and messy.
Love your videos! I really apricate the content you're putting out. Such good stuff. I now own 3 CFMotos, two 2020 600 touring and one 2021 800. Love them! Will that one liter bottle of gear oil fill both the front and rear gear cases?
How have all of your machines held up? Any problems? Mileage?
Hello, I see the gear oil tube but you never use it? Do you not change gear oil on this machine?
Just bought my 2023 CFMOTO 800XC. Just wanted to confirm how many grease fitting points are there in total?
Spoko jestem Cf od roku cholera kobieta mnie uczy 👍
Great vid. Looking forward to working on my new machine
Hi guys, why is my dealer telling me that cfmoto says to check oil and trans with it screwed in? Manual says screwed out to check but the dealer says otherwise, and they've always serviced all cfmotos that way. They say cfmoto/other brands changes service techniques often. I agree with that but with regards to fluids I'm not so sure.
When you guys flushed the transmission how much fluid did yall put in? Thanks 👊🏻
That Engine is a same has a can am but it's turned around. Look forward to see what the price is on the 1000 with 79 HP ,I know that the 800 is $8,599. But right now I'm thinking about making my Sportsman XP 1000 about 7in longer so it would have a 60in wheelbase, I ready have the steel , equipment and the plans but don't know what time to start because I ride all year round.
Its good video👍, but in the Russia l think russian repairman no washing its filter😅, my english no good. From Yakutsk, sibirian
I love your channel and I have a question. I just bought a 2021 CFORCE 400s and this machine is a billy goat . I had a Polaris 700 and like my 400 more and it is the same weight but my question is I bought from Tractor supply a 2500 atv winch but I can find a place to mount the regulator box any where .Do I need this or can I use what is already in the machine and if so where would it be . Thank you Rene Martel and God bless brother.
If you need to splice tome wire to extend it to where you can mount the regulator somewhere then id do that.. but i am not familiar with the winch setups that Tractor supply sells..
Nice jobs guys
Nice job! I saw on a previous video You changed on a unit the engine oil bath washer from aluminium to cooper washer om the drain plug. It is better?
At the 4:07 time mark, there's a tube right in front of the oil fill port that has a small clear tube, what is that tube? I noticed it on my 2022 machine when I checked the oil and it had clear liquid in it..
I just bought a new Cforce 800xc what type fuel do you use in yours I was told to use 89 mid!????
Got a video on doing this to a 2013? thanks!
When are y’all going to do a video on changing the coolant on a 1000 overland?
Love your videos very helpful. I'm having a problem shifting my 2020 cforce 600 touring. It happens mostly when the pressure on the drive train like trying to go in reverse when your on a hill or vice-versa. Is there a fix for this or 8 do I just live with it. Thanks sal
My 2021 Cforce 500s is squealing when I turn right in 4 wheel drive. Any help would be appreciated. Great channel.
do you ship that to europe`? To bulgaria?
Hello: Great video. Thank you very much! I think is very useful. I live in Argentina and is difficult here to find help to do that work and to find original replacement parts. I want to ask you, may be you konw , if I can use a Can Am 800 Renegade oil filter to replace de Cfmoto 800s one. Thank you very much again!
Great video, but one thing... why ar you spraying oil/grease on every moving part the only thing thats gonna happen is sand and dirt sticking on the oil/grease....
Great information guys, but why are you working offer a forklift? Safety first guys!
What is the labour rate per hour and re time to perform the service?
Got a quick question: At 6:49, What is the black hose with the clear cap end with the 2 clamps right next to the oil dipstick/fill.?? I just recently bought a cf800 and would like to know what this is for. Checking today, it had water in the clear portion....Just wondering...Thank you in advance..
New oil filter did not have a spring inside,, old one did is this to be re used?
My 2017 cforce 800 has a flashing fuel gage that bounces between full and empty even when the tank is full . As I drive it it will bounce all over and I never know my fuel level without calculating miles driven ÷ by mpg. I also have had a new fuel pump installed in 2020. Have you come across this problem before?
A video to fix this would be nice, I'm not the only one with this problem.
Have you guy done a video of what kind of must have tools you should bring with you out riding
Good video do you know where is the power steering fuse on the cfmoto 800xc
Like your videos. Tell me more about those skid plates.
What is that spray he’s using on his hands and the parts?
Do you have issues getting to the battery with the radiator relocated????
I have 3 cfmoto all 2021 from a 400 to a 600 touring I'm trying to find out if any of them have transmission oil
I only need one more forklift truck. 👍😁
Haha having a lift is nice.. but everything is pretty easy to get to even without jacking it up.
Thanks for watching.. hope its helpful
Is this the recommended 25 hour service? How often should we do this servicing? I’m coming up on my 2022 cforce 800xc 25 hour service.
How often would ya change coolant ? or coolant flush ?
Hello, 850cx or new 625 is better choice and value for money? Thanks
Thank you - very helpful
You're welcome!
Witam ile oleju do przedniego dyfra wlewacie, też do przelania
Easy as pie! Thank you!
Hello I'm from the Netherlands. If I'm right you said that by every 1000 you have to change the differenctial is that correct? Because the Dealer from here told me that I have to change it for the first time by 6000km or when I here a sound when I'm driving. But after 6000km seems like to much to me. Can you please advice me thanks!
I have 2 - 2021 cf600 could you talk about those more/ maintenance Etc. I have 2.8 hrs on them. Thanks
What was he spraying in the key hole ,gear shifter shocks etc
That vent line for the trans doesn't have to be extended with the snorkel? Seems very low. No water gets in ?
Great video thanks 👍 👌
Thanks!
So when do you adjust the valves
great vid, just a question our new cforce 800 2021 model is almost due for 1st oil change service, we like to know has the 800 dry clutch or wet clutch, as there are 2 types of oil the normal and motorbike wet clutch oil
I recommend you running the oil that's in this video for your machines. It is all we use. Great stuff and is 100 percent approved by CFMOTO. Maxima Racing Oil 10w-40 ...
All oils will work in a dry clutch setup. and only certain wet clutch specific oils should be ran in the machines with a wet clutch. But your CFORCE ATVS are not wet clutches.
@@RealTalkPowersports Thank you so much i see in the specifications of the oil its wet clutch oil, unfortunately we in Namibia are limited to few oil brands only but similar oil has castrol then i will use that. thanks great channel God Bless
Just out of curiosity but do you know of any box's that fit where back seat goes like the can-am I know you could get them for the 2018s
what is that cable or linkage he moved when changing the oil filter?
Oil strainer cleanup when changing oil?
What size of tires you have on cforce 800? And what max tire I can install on stock suspension ?
Hi! There is no problem to shift trough P R N H L while engine is off?
Thank you 👍👍👍
No problem 👍
I cant find the lubrication on the website u use to lub all the moving parts
Teammscparts.com
Hi, könntet ihr mal das Recolaction Kit+ Schlauch Set , näher zeigen und wo die Schläuche lang gehen?
Are the CFMOTO ATVs the same build quality as the Honda ATVs ?
No point to grease every surface. Grease attaches dust and it will act as sand paper. Grease only where grease is meant to be put. Also not all rubber and plastic is oil and grease resistant. Yamaha has list of greases in manual, every grease type has its own place. Some greases are dust resistant, some are water resistant. Some work on plastics, some work in cold, some work in hot
What was that spray oil stuff he was using
Do they make a snorkel kit for the 21 cforce 600’s? Having a hard time finding any Info
Got any info on that rad relocate and snorkel kit? Very helpful video thanks
It all came from and was installed at Main Street Cycle.
Well this particular snorkel kit was actually installed in Texas by warrior riser. But MSC has them in stock
Do you know if they ship to Canada? I'm buying my cforce 800 this weekend and looking at options.
@@BlackJackKO551 You can message Main Street Cycle on facebook and see.. but i think they are only able to ship in the USA right now
How do you reset the oil light on the 1000
You wouldn't have a transmission drain bolt and washer I could get would you?
yea bro.. text 662-438-6407 and someone will get with you on tuesday.. they are closed for memorial day
Nice Video the next question is do you guys deliver parts in Canada?
is the 85w90 a synthetic oil
Can 10w 40 full synthetic w
Work klotz brand
This would basicly be for the 600 touring as well correct?
Very similar for sure.. but we will still do a video on one soon
You guys are amazing! Thinking about changing my Outlander in for a Cforce. Until then though - Any chance you could make the same video for an Outlander Max XT 850?
Thanks Ramsay.. I dont know if we will do any maintenance videos on Canams anytime soon. Our goal is to do one on every CFMOTO they offer first.
@@RealTalkPowersports totally get it. Cheers man. Thanks again for the great videos! I’ve seen almost all of them.
Is this the same for the 600? Great video.
I have a Q: I bought a brand new 2020 800xc and I can not find the passenger weight capacity anywhere (manual, dealer, manufacturer all useless). I want to take a passenger riding with me and she is a plus sized woman. Can you help me with this info? Once again I have a 2020 cf moto 800xc touring.