How to make a Quality Hatch for a Expedition Truck habitat from scratch ! Save money all DIY !!!
HTML-код
- Опубликовано: 16 окт 2024
- In this Episode you can see how we fabricated our garage hatches from scratch for our Expedition truck habitat. For our Mercedes Benz 1222 AF 4x4 off road expedition truck build. DIY
Affiliate links
Deburring tool : amzn.to/4aSgToS
Sika Flex 252 : amzn.to/47t8tkV
Sika Flex 221 : amzn.to/41WAErt
Hatch handle : mk-beschlaege....
Häfele door lock : www.ebay.de/it...
Strike Plate : www.ebay.de/it...
Lock ( cylinder ) : www.ebay.de/it...
Camera : amzn.to/3Pw5wKW
expedition truck, kurzhauber, wohnmobil, weltreisemobil, selbstausbauer, expedition vehicle, expedition, truck, diy expedition vehicle, truck camper, expedition truck build, 4x4 expedition truck, expedition truck camper, truck build, Mercedes expedition truck, expedition camper build, box truck build, expedition vehicle build, flatbed truck build, expedition overland, overland build, camper truck, diy expedition camper
overland expedition vehicle build, diy box truck conversion, overlander, off road, diy van build
off grid
Better than at the factory ,very secure. The best very well done.
Thanks a lot.
Beautiful work.
Thank you so much 😀
Just found your channel, absolutely love your attention to detail.
Thank you so much!
Love it Oscar! You build awesome products. Pleasure watching a maker do his thing.
FYI, I brought a Mercedes 1124 AF into the states and I’m in the process of building it out. I knew all along that I was going to build my own windows, doors, etc. so finding your channel has been inspiring!
Thanks much
Very cool! Would love to see your project thank you for the very kind feedback !
I love that you used piano hinges on the hatch to spread the load across the entire top edge of the hatch. In my overlander plan all my cabinetry doors will have piano hinges as will the main door and any hatch for the same reason, spreading the load and less chance that any of the screws pull out.
100 % agreed ! Thanks for commenting !
Really impressive as always Oskar!👍🏻
Thank you! Cheers!
🙂 Glad to see you feeling better! 🙂 Great job on the hatch, looks so sturdy and professional. I think the lock cylinder location might begin to annoy you after a while, but only time will tell. Totally agree about the latch handle position, so I don't think you had any other choice.
Yes I have to see if this will annoy me, for now I have no clue how often you have to open and close the storage area on a camping trip. As you said time will tell. Thank you !
Good job 😊😊
Thank you! Cheers!
Very nice and solid !
Thanks a lot!
Happy New Year to you as well. Thanks for this video, now i know how to build the ones i need, excellent!!!
Happy new year! Excellent thank you for the feedback !
Absolute genius, really 👌
The build quality is impressive and loving the attention to detail around the thermal bridging 👍😊
Thank you so much 😀
Where did you source that aluminum with 2 90° angles? Very solid build! I’d bet it is break in proof!
It is a brake shape from a flashing shop, they bend it they way I order. 2mm thick 080 gauge. Cheers
I'm amazed, how you made this hatch. Even made a proper insulation between the inner and outer material. Could you insulate the outer frame, where the hatch fits in, also? I mean no "cold-bridge". I presume your piano hitch is stainless steel? Great job done......keep on going.
Yes the hinges are stainless and the frame part is well insulated, it was visible in the video where I installed the inner plywood. All window / hatch and door frames are well insulated inside.
@@oscaroverlander_MB1222AF TOP JOB.........by the way, what is your personal name.? I presume it's not Oscar.
Awesome job! Happy New Year to you and your family too ;)
Happy new year! Thank you !
Looking forward to the gas struts video! figuring out the force and geometry always drives me a little nuts.
Coming soon!
Very impressive result and excellent work. In my build (truck not here yet because Houthi rebels caused ship to turn back!) I plan to use the cut out of the camper box wall (it is double sided alu bonded to insulation each side) and trim with glas fibre reinforced angle … issue is insulating recess for lock set though.
Thank you very much ands I hope your truck arrives soon.
@@oscaroverlander_MB1222AF it just left Gibraltar area after turning back half way down Red Sea. Spent two days taking on more containers I think in Spain and refueling for the long trip around Africa. So I think delayed about 3 weeks so now not until mid March.
@@Elderlanders I know that feeling trust me when you need to wait. Tracking the ship every day and when they are in open sea there is no position update for a few days. It was a while ago but I still know what you are going through right now. So your truck fits in a container or do you have him on a open container ?
@@oscaroverlander_MB1222AF so camper box slides off the back of truck sub frame. This way the two can fit in a 40’ HC container. There is only 25 mm side clearance for the truck at the entry door of the container. I like the idea of container shipping. A bit less pricey than roro or flat rack. But some work to connect / disconnect things for sure. I could send photo if you like. I’m in Vancouver so someday I could show it in real life.
Happy New Year to you and your family 🎉
I was wondering how you were going to build your hatches. I thought you might use a composite board to reduce weight. 🤔
Definitely would not have been ad strong as this set up.💪👍📺
Happy new year to you and your family as well ! I am quite happy how they turned out and the weight is not too bad 34 lbs per hatch. I can live with that. Thanks for commenting !
How are you welding the aluminum ? is there a tutorial for this?
I use a spool gun for aluminum welding, but you will find countless tutorials on RUclips "how to weld aluminum" it depends on the equipment you have available and skills. Cheers