Super glad I found this channel. I’ve been building a forged RB25 over the last year. Shooting for 600-700hp. I’ve learned a bunch from you and you’re a huge inspiration! Glad to see this thing ripping! Can’t wait to get my R33 built!
@@odysseybmx17 thanks man! Mine made over 600whp a few months ago! Just sold it! Onto the next build! Check out a few of my short clips! The thing absolutely RIPPED!
@@BigZee I just enjoy building cars, and if I can sell them for a good profit, I use that to fund the next build. My AMG is crazy, but I’m actually building an R33 GTR with a Nitto 2.8L billet crank and PPG sequential!
@@BrianCrofoot that’s insane man! I’ve been really wanting a e63 amg but heard the 55 are better. Can’t wait to see your GTR up next man!! Still don’t know if should sell my r33 gtst for a amg ahah
If I had done all of that to my 33 it definitely would have justified a forward facing plenum, and the pain in the arse the cross over pipe was when doing plugs, but I did get around that with a wobbly extension and mods to the valley cover
Man he knows the rb setup well! If I was building one I would follow every step of his build that car is a pure weapon and is the best sounding rb I've ever heard👌✌
watching an old versus a new one of your videos, you seem so much happier, less stressed and it's such a good thing to see. Keep it up and, when in doubt, diff her out
Mate this is a really well thought out build. Prices have gone up a fair bit in the past 3 years thats for sure! will be looking to join the 500hp Club with my RB in the near future
Nice build I also have a 6 boost on my ca18det with a custom dump with a cat from a small plane and a kakimoto exausht plus lots of sweet parts just pumping 300hp so not too much I have blow off but plumbed back before the turbo also get some sweet turbo flutters had my 180 for 19yrs now great fun daily driver I'm a expat aussie working in Asia moving to KL going to export it and enjoy Malaysia.
my r33 has now 403whp, costed aprox 3-4k$ only injections/coils done do enging beside turbo/frontmount/power fc etc, runs fine but i wanna crawl up to 500whp soon, and for that to happend it cost me around 7-8k$ here in norway love this channel! keep it up man
What's going on man. Yo your videos are fucken sick. Been watching for a little while now. You 100% deserve more subs. Its always worth it, RB's sound so good
Very nice set up . Ive got a white 94 r33 four door . 368hp I've got the same intercooler cross over pipe. Im running a low mount turbo set up . Have to unfortunately rebuild my 25det. So your vid is very interesting. Im only chasing 400.
Mate love the content!!! Think about turning building engines into a business, i would definately pay you to build an engine. You have so much potential.
That's dope bro and love the videos. I have a 96 Series 2 R33 on E85 with 386kw at wheels. Upgrading the coils, injectors and fuel pump and going for 450rwkw to 500rwkw.
I've been waiting for this video for a while now and watching it I'm taking notes of what I need to do 😂😂. Great video, I love your R33 and the sound is just insane bro💯💯👊🏻
Thanks a lot for the info dude, crazy cool build. Im looking to do the same thing and im wondering if these prices are given in AUD or USD? i would appreciate any input. Cheers
Almost the same parts list as my build. I haven't added all mine up, but my preliminary (pre build) costs worked out at $15000, excluding tools. ended up having to swap machine shops halfway so actual probably closer to 20.
Differently would have recommended a billet oil pump gearset inside the n1 housing. along with other things how ever good video good start to a budget build.
How the fuck did you find the money for 32 when you were 15 holyyy I’m 16 and just now starting to start racking in some money for these things now. Love the build sounds soo nice. Really happy for you man
Fkn Mickey bro sounds mint! Well worth money spent man.. I’m at the point of getting all my mods very very soon not cheap hehe. Bit stuck on which way to go!
What do u do with your external gate when its time for inspection? Is it illegal there in Australia? Mine is just an unbolt and bolt back to the exhuast when its time for wof inspection lol
Someone actually gave you a thumb down for you vid lol REALLY!! hahahaha...., the rb 25 build is great!!!.. great information on the costings man... great detail for someone looking to do a nice build... id reccomend this video to anyone
You're really genuine and it's awesome. No immature bullshit or bravado, just facts and advice. Great content.
I Always hit like before the video starts
oh 100%
thanks ya sick kants!
Same
Same bro
I love the way this rb25 sounds it's music to my ears and I listen to all rbs sound like and this one is my number one favorite.
cheers man glad you like it!
Super glad I found this channel. I’ve been building a forged RB25 over the last year. Shooting for 600-700hp. I’ve learned a bunch from you and you’re a huge inspiration! Glad to see this thing ripping! Can’t wait to get my R33 built!
Good luck hope it’s finished! I’m just about to begin my forged rb25 build
@@odysseybmx17 thanks man! Mine made over 600whp a few months ago! Just sold it! Onto the next build! Check out a few of my short clips! The thing absolutely RIPPED!
@@BrianCrofoot why did you sell it? I went on your RUclips and saw your e55 amg! Making me want to sell my 33 for one ahah
@@BigZee I just enjoy building cars, and if I can sell them for a good profit, I use that to fund the next build. My AMG is crazy, but I’m actually building an R33 GTR with a Nitto 2.8L billet crank and PPG sequential!
@@BrianCrofoot that’s insane man! I’ve been really wanting a e63 amg but heard the 55 are better. Can’t wait to see your GTR up next man!! Still don’t know if should sell my r33 gtst for a amg ahah
This defs gives me inspiration to build my 25 in the 32!
hellyeeeee
I found your videos by chance and love how thorough, genuine and enthusiastic you are with your cars. Keep up the good work and videos!
thanks heaps mate and for your kind words!
Dude i fricken love this channel of yours always keeping it real and showing us the real stuff keep it up man
:D
Well worth every cent man. Nothing i love more than boosting my rb25 around
agreed!! parts aint cheap either so get the best of it !
@@ClutchKickJunkies oath man. I dont even wanna work out how much i spent on mine
Crazy number! Cars are really expensive, but worth the fun especially if you’re committed. Great work 👌🏾
indeed man cheers :D
If I had done all of that to my 33 it definitely would have justified a forward facing plenum, and the pain in the arse the cross over pipe was when doing plugs, but I did get around that with a wobbly extension and mods to the valley cover
Drinking game... take a shot every time he takes his hand on and off the steering wheel while talking 😂😂😂
or says, you know what I mean
Man he knows the rb setup well! If I was building one I would follow every step of his build that car is a pure weapon and is the best sounding rb I've ever heard👌✌
thanks mate respect!
Very informative I like the breakdown of the build more ppl need to do it.
Damn bro I've been following this channel for a while and it keeps getting better love the build I'm on a rb25 build coming soon
watching an old versus a new one of your videos, you seem so much happier, less stressed and it's such a good thing to see. Keep it up and, when in doubt, diff her out
Mate this is a really well thought out build. Prices have gone up a fair bit in the past 3 years thats for sure! will be looking to join the 500hp Club with my RB in the near future
I love that custom pipe for the intake manifold mate
Dude great work with your videos i really enjoy watching them!!!
glad you enjoy it mate!!
If 2j's are a 8/10 in the sound department then the rb is a 9.5/10
Agreed, as an engine I much prefer JZ's but an RB does sound better!
rb25 just sounds WAY to good!
That is the best sounding rb25, fight me. Keen to learn how much it is to do bro
They pretty much all sound like this (ie; damn awesome) when modded.
never herd a 800hp or 1000hp rb.
thanks mate!!!
Nice build I also have a 6 boost on my ca18det with a custom dump with a cat from a small plane and a kakimoto exausht plus lots of sweet parts just pumping 300hp so not too much I have blow off but plumbed back before the turbo also get some sweet turbo flutters had my 180 for 19yrs now great fun daily driver I'm a expat aussie working in Asia moving to KL going to export it and enjoy Malaysia.
my r33 has now 403whp, costed aprox 3-4k$ only injections/coils done do enging beside turbo/frontmount/power fc etc, runs fine but i wanna crawl up to 500whp soon, and for that to happend it cost me around 7-8k$ here in norway
love this channel! keep it up man
how did you tune the car? no standalone? please help i just need a little more power, thanks
@@o2wrx911the apexi power FC is a stand alone with a hand held controller from the 2000s good and cheaper then a haltech but run a modern ecu if u can
Love your work andrew stoked for you an very jealous of your build
Exhaust systems for stainless in adelaide are $2,000 minimum.
I had a full stainless band clamp system made last week for my rb 180
Thank you for the info andrew, i am a big fan of your work keep them coming.
Best intro I’ve ever seen no lie🔥🔥
What's going on man. Yo your videos are fucken sick. Been watching for a little while now. You 100% deserve more subs. Its always worth it, RB's sound so good
hell yeah cheers for your support man! the more the videos get shared the more will see :D
Support from Belgium! The car sounds sick!
Very nice set up . Ive got a white 94 r33 four door . 368hp I've got the same intercooler cross over pipe. Im running a low mount turbo set up . Have to unfortunately rebuild my 25det. So your vid is very interesting. Im only chasing 400.
Followed on insta brother, always a treat whenever you have a new upload 🤙🏻
Supertech valve springs are the best . Run them on my sr20det 9000rpm . Loves it
Mate love the content!!! Think about turning building engines into a business, i would definately pay you to build an engine. You have so much potential.
That's dope bro and love the videos. I have a 96 Series 2 R33 on E85 with 386kw at wheels. Upgrading the coils, injectors and fuel pump and going for 450rwkw to 500rwkw.
Please make a budget build video for an rb25 :)
Damn 10k is coming good to see you getting more attention man
thanks to you mad kents for helping getting the videos out there :)
Tons of valuable info, good job! I NEED an R33 to add to my channel asap!
Good stuff man!!! Thanks for all the input and reviews!!! Wicked BUILD
Beautiful, simply beautiful
Duuude relocate your power steering res love your work as well
Bit late to the party, but still super informative and straight forward, thanks for the content bro saying all the shit everyone else glosses over
Perfect video man!
If you were going to do this over again part by part, what would be the order in which you do them be?
Loving the vids bro keep up the good work
cheers man
You don't like a 276 cams instead of a 256? I think it sounds way better. Just my opinion but I want to hear your thoughts. Thanks for the video.
i love this channel i have a similar setup in my s13 im going for 550 im at 467 on pump gas right now
Am all the way in the bahamas I love your build I would love if I can 1 day get mines to way your at
Top work dude, your detail is awesome 😀😀😀😀
glad you liked it man!
Great video mate, love the car
I've been waiting for this video for a while now and watching it I'm taking notes of what I need to do 😂😂. Great video, I love your R33 and the sound is just insane bro💯💯👊🏻
thanks heaps mate and haha sorry for the wait!!
@@ClutchKickJunkies Its alright the wait was worth it and will always be worth it💯💯
Some money into it well worth it serious car are you planning to get it painted or anything else done?
Loving the r33 brother. Nice safe set up 👍
cheers mate
Wait!!! I forgot to hit the like 👍 BUTTON. BTW, I already SUBSCRIBED 😀
Thanks a lot for the info dude, crazy cool build. Im looking to do the same thing and im wondering if these prices are given in AUD or USD? i would appreciate any input. Cheers
Sounds soooo good! 👌👌
Would love to see a budget RB25 build!
Always the best content cheers bro ❤️
respect mate!
Almost the same parts list as my build. I haven't added all mine up, but my preliminary (pre build) costs worked out at $15000, excluding tools. ended up having to swap machine shops halfway so actual probably closer to 20.
I try not think about it anymore hahaha
Sounds so good
You got a new subscriber .
Love the vid and love the Metallica shirt 🤟🏻 10k subscribers by the end of the year for sure!
Gained 2k in 1 month I think so hopefully soon haha
Impressive..most impressive.
Differently would have recommended a billet oil pump gearset inside the n1 housing. along with other things how ever good video good start to a budget build.
that is the way to go but genuine n1s are good enough i know a few that abuse them :D
sick build 👌
How the fuck did you find the money for 32 when you were 15 holyyy I’m 16 and just now starting to start racking in some money for these things now. Love the build sounds soo nice. Really happy for you man
hahaha thanks man!! used to do tv show stuff haha but back then skylines were as cheap as a bottle of whiskey
sick build! rev limit?
Hey mate, what clutch are you using? And whats the website to purchase?
Cheers
Nice vid man
Great review brother
cheers mate!!
Almost identical to the amount i'm spending on my RB25. All worth it in the end
good luck man !!
Did you change the oil pump gears to billet gears? Sick video as always man!
forgot to but lucky some mates have had theirs going strong. the real gtr n1 oil pumps can take a beating usually the copy ones faulty
cheeky thumbs up or getting flipped off? haha 2:50
thumbs up for sure
was thumbs up twice haha
How come you didn’t go forward facing plenum?
Mad Rb sound, rep the aussie jdm tyre slaying 😊
hahaha hell yeee
Yo boss man I've been waiting for another vid
new one soon!
If u do pov you should get the headstraps where u put the go pro on your head so u can drive without having to hold the go pro 👌🏽
Fkn Mickey bro sounds mint! Well worth money spent man.. I’m at the point of getting all my mods very very soon not cheap hehe. Bit stuck on which way to go!
hell yeah man sick!! if you need anything to know about hit me up on my ig i help out with mods on there too :)
Clutch Kick Junkies hey Andrew i inboxed you on insta..
Brooo, tell me what I have to do for my 25det flutters like that 😍
respect for this vid much help cheers g
Why didn’t you put you putting the thrust bearing/clutch fork in backwards how does one do that 😂🤦🏼♂️👌🏼
What do u do with your external gate when its time for inspection? Is it illegal there in Australia? Mine is just an unbolt and bolt back to the exhuast when its time for wof inspection lol
how you can build this crazy setup ?! I mean what is your job ??
Calm down big boy hahaha
Keen as for a mountain run.
hahaha ;)
Good shit dude, 20K for happiness. You only get one life spend it right. This car is sick as fuck.
thanks mate :D
What brand shirt is that ?
what websites did you get your parts from? getting r33 rb25 next week :)
Who are the 12 dickheads who don't like this video? Good stuff brother, love your work
Someone actually gave you a thumb down for you vid lol REALLY!! hahahaha...., the rb 25 build is great!!!..
great information on the costings man... great detail for someone looking to do a nice build... id reccomend this video to anyone
Yo this looks like the road I had to drive through to pick up my white r33 😂 was this in kew?
I used a shop to build my engine. It went for about 13700 AUD. And that's without finishing the whole engine.
Hey keep up the vids love em
cheers mannn!
hello...can tell me gtr n1 oil pump where can buy??
Can you use the tomei poncam 256 on the Rb25det neo??
Explain the map sensor delete sitch again :D
Nice bro!
How about boost controller bro?
Hey bro where can i can a good body kit for my r33 gtst
Hey bro, have you sold your high flow turbo?
a s15 with a 2jz would be so sick.
good break down, but please research and learn on what GST actually is!
so nice !!!!!
On a serious note do you know a great website to source r33 parts in general, I’m in the USA
im very certain these shops can post to America no worry
It’s not my wallet I bought all my stuff from Raw Brokerage. Very knowledgeable and good deals.