Dude I’m loving watching each video you release. I’m here for the start and for the rest !! :) Love your humor and the layout of the videos. Keep doing what you’re doing my friend. Love it :)
this shits hard. love your videos. it's really motivating to see you keep pushing through the little failures we all face while making entertaining videos & cool guitars in the process. dudes rock
VROOM I love that you show your mistakes. I get so caught up in the chase for perfection, that I give up on most projects. I think we all need a reminder that mistakes are going to happen.
VROOM! LMAO Laughed so hard a couple of times watching this vid! Thanks man! Just finished fixing (or should I say, deep cleaning) a bass that I bought from a warehouse where they buy japanese "garbage" guitars etc, and was lucky that it's just dirty and its electronics are still working, albeit its single knob isn't turning lol With my current knowledge on how to fix a guitar, I'd probably cry when faced with the same situation. Looking forward to your next upload!
Vroom (Ted sent me) the humor, honestly, and pacing of your content is amazing and has gotten me back into tinkering and fixing and making things again, I sincerely appreciate what you do - thanks!
VROOM VROOM love your videos man, I hope you make more of these guitar restoration videos The demo at the end was insane...I want a guitar like that..it is just way too cool
VROOM I’m glad the channel’s finally getting more attention. I think it’s really important that people know that restoration isn’t always gonna be pretty. Love the content!
A hole hearted VROOOOOOM from my end, thats an awsome guitar. Love the perfect chaos and feedback from the instrument and the not a luthier. Props to Ted, he loves the channel cause he does not have to repair those guitars....not that they need any, its just a reassembly job no? Keep it going, much love and smiles!
Vroom vroom. So inspiring to see your kitchen sink making practice. Makes me look at my box of unfinished amp projects with new purpose. Thank you for your videos!
I love your videos dude I hope you keep making them. I need you to keep cranking these out because every time I see one I'm more inspired to actually fix my ancient Lindell VN2
Wait what the hell every time I see a new channel that caters to everything I love they have like 500K subscribers and I think nothing of it. There’s no way you only have 6k, I cant wait to say I was an early settler when you’re huge. Also vroom
Vroom! I enjoy your videos a lot, and the fact that things don't always go as planned is refreshing. You don't have to know everything to do it and that's a great way to learn
" vroom ,vroom "Wasn't expecting you to say Nova Scotia brother. Im just over on the end of cape breton. Love what your doing and would love to have a guitar like this. Be it win one or maybe purchase lol. Keep up the work man. Very peaceful and calming to watch.
The fact that you show all the mistakes and how you're just going along with it and still get really cool results makes me feel like I could give this a shot as well. Very cool channel! Vroom!
Vroom. I enjoy your videos because you are entertaining. I don’t care if you can explain how to build a boost circuit. I outsource that stuff now anyway. And there are many good electronics channels from which to learn. I enjoy your mistakes, watching you counters my obsessive tendencies and gives me hope that things could just be fun for a change. The pacing and editing of your videos is top notch, the camera work is well considered, and some of the shots show artistic flair. Overall incredibly entertaining!
VROOM, i guess! Wow, was a bit busy and skipped on a few videos of yours and already forgot how charming and a bit surreal (in a good way) your videos are. Thanks for your work, man. Been a fan since the methstang came to be, keep on going!
The guitar turned out great! Also the band name in your hair obviously says Krakatoa. 😏Anyways, I’d love to see a video of you explaining how to make an overdrive circuit. Vroom!
For securing smaller ferrules in larger holes I usually use paper masking tape or if I'm feeling really special - teflon plumbers tape. Works like a charm and is easier to remove the ferrules if the need occurs. Highly reccomend.
I love these sorts of videos. THeir keeping me motivated on my own related project. A guitar with a shatter neck, that was then turne dinto a clock, which I am restoring (and having to make many parts/pickups for!)
VROOM. Love the channel and love the content. I do not know much about the era of guitars you often show. I love informational RUclips content and this ranks up among my favourite.
Vroom!!! I love your videos man. I feel like 90% of what I know about electric guitars is from watching you. I feel like I learn more bc your videos aren't boring lol. Keep it up I'd love to see you hit 10k
I love the way you do things and the materials you use. I loathe the modern way of doing things and routinely make things work with what I have on Honda, this is the way. I do have lots of tools but you never have enough and you make do.
Vroom ! Also I'm so with you on the Kluson Safe Ti Posts, it's a shame they're almost only installed on fender style , 6 inline headstocks. It also removes the risk of ruining your gig bag lining with string ends, which has happened to me with several bags. It looks like nowadays their only 3x3 models are the Mosrite ones and the variant of the concept made by Duesenberg.
24:30 That's not a guitar! That's a jackhammer! Awesome Videos, keep it up. Teaching s hard, but everything needs practice ;) I m looking forward to the next ones.
this is great, I would love to see how that overdrive circuit works and try and put one in my project bass to give me some grr to go along with the vroom
VROOM! Just getting a tutorial on the boosters is win enough for me, but VROOM anyway :) Really really enjoy your work - greetings from Sunny Salt Lake City! Peace
Good sh!t, my man. Subscribed. Looking forward to doing something very similar in a Jaguar build I'm doing. This might just get me off my arse and do it...eventually, someday.Also looking forward to more videos from you, maybe put some more effects in there? That would be cool. oh yeah, and VROOM f'n vroooom!!!
Wash the fretboard, what with? I have a dirty old Kay needs this. Loved the fingerboard on the Methstang. I have a half log sitting in the garage for a lap steel project too.
So much for tone wood...less wood=more tone? I would love to hear why the holes were drilled in the body, from the person who drilled them. Great job...VROOM VROOM!!
I think fixing old guitars as opposed to buying new is a trend that should grow in popularity.
There are probably ~enough~ for now.
@@Notaluthier As far as I know lemon oil too is just food safe mineral oil with a scent. So using it without that scent is fine.
@@EbonyPope There's types. What dunlop calls "lemon oil" is indeed just mineral oil with a scent. Actual lemon oil is terrible for guitars.
@@kennytheamazing I know.
"Vroom"
i swear the leader of fixing used guitars is "not a luthier" and if it becomes a trend, this guy owns it..
I am entertained.... More of this please
you are such a breath of fresh air for youtube guitarists, love your vids, please keep them coming, vroom!
Thanks!
I can't wait to coat my countertop and cutlery in wax. Thanks for the tips!
This is a very entertaining channel. I'm a mediocre bassist myself, but I do enjoy antique "player" grade instruments like this.
This is exactly the sort of guitar building channel i want, just a dude doin it wrong it all the right ways! VROOM!
Hell yeah!
Dude I’m loving watching each video you release. I’m here for the start and for the rest !! :) Love your humor and the layout of the videos. Keep doing what you’re doing my friend. Love it :)
Thanks a lot!
I like everything about this rebuild. What s cool guitar.
It’s neat! I tried a heavier guage 13-56 because of the short scale, but ended up with 10s. I wish I had captured its loudness better
You’ve created the coolest guitar in this world
You weren't kidding with the username lol ❤ VROOM
Burnt!
this shits hard. love your videos. it's really motivating to see you keep pushing through the little failures we all face while making entertaining videos & cool guitars in the process. dudes rock
VROOM
I love that you show your mistakes. I get so caught up in the chase for perfection, that I give up on most projects. I think we all need a reminder that mistakes are going to happen.
Thanks! Sometimes I think I make nothing but mistakes, but then shit is done and sounds great 🤷 hashtag blessed?
Dude your videos are excellent. Ted from twoodfrd was right. You deserve more subscribers.
VROOM! Loving your videos. I play music with your Dad sometimes and he suggested I check it out.
Well done.
Oh sweet, hey! Maybe I’ll do an electronic drum video someday 😜
VROOM! 10K TODAY??
Your humorous ways of telling the story is just great!
Looks awesome!
Well vroom vroom vroom. I dig what you did with this one. Super cool
Vroom.
This is some of the best content I have watched in a while. We need a Meth Paul episode asap
VROOM! LMAO
Laughed so hard a couple of times watching this vid! Thanks man!
Just finished fixing (or should I say, deep cleaning) a bass that I bought from a warehouse where they buy japanese "garbage" guitars etc, and was lucky that it's just dirty and its electronics are still working, albeit its single knob isn't turning lol
With my current knowledge on how to fix a guitar, I'd probably cry when faced with the same situation.
Looking forward to your next upload!
..man, that dog puts up with a lot from you.🦝
VROOOOMMMMMM!!!
Love all your vids man so far, keep them coming! :)
The wax scene! 😂😂😂 So many valuable lessons. 🙏🏻
" But then again I would keep the wax/and melt it down/pluck some floss/and swish it 'round......" F.Z.
Vroom (Ted sent me) the humor, honestly, and pacing of your content is amazing and has gotten me back into tinkering and fixing and making things again, I sincerely appreciate what you do - thanks!
Thanks!
Really has a thing for pocket and parlor guitars. A man of culture.
VROOM! Also, cool guitars, fun videos; that why we watch
VROOM VROOM
love your videos man, I hope you make more of these guitar restoration videos
The demo at the end was insane...I want a guitar like that..it is just way too cool
VROOM
I’m glad the channel’s finally getting more attention. I think it’s really important that people know that restoration isn’t always gonna be pretty. Love the content!
A hole hearted VROOOOOOM from my end, thats an awsome guitar. Love the perfect chaos and feedback from the instrument and the not a luthier.
Props to Ted, he loves the channel cause he does not have to repair those guitars....not that they need any, its just a reassembly job no?
Keep it going, much love and smiles!
Vroom vroom. So inspiring to see your kitchen sink making practice. Makes me look at my box of unfinished amp projects with new purpose. Thank you for your videos!
That actually sounds really good. Especially with the boost cranked.
Vroom - love what you’re doing, please keep it up!
Vroom! You made me laugh out loud.
Your tool kit and mine are similar enough for me to completely understand your process.
I love your videos dude I hope you keep making them. I need you to keep cranking these out because every time I see one I'm more inspired to actually fix my ancient Lindell VN2
Wait what the hell every time I see a new channel that caters to everything I love they have like 500K subscribers and I think nothing of it. There’s no way you only have 6k, I cant wait to say I was an early settler when you’re huge. Also vroom
Pls tell everyone 😅
VROOM! Youre funny and i like your attitude with old instruments
VROOM! Love the national brand of guitars, there’s just something about them that make them both unapologetically old and futuristic at the same time.
Vroom
I look forward to every single video you put out!! Awesome builds and the comedy is a 10!!! Seriously keep up the great work and thank you!!
Vroom! I enjoy your videos a lot, and the fact that things don't always go as planned is refreshing. You don't have to know everything to do it and that's a great way to learn
I am so glad I came across your channel, your one of my favs
Yay! Thanks!
Man that looks and sounds so sweet I can’t wait to see this overdrive circuit video.. I think I have a dream for that one!
Vroom! Also I love your channel man. I love it
First time I've checked your channel out, really love your work brother 🎸🎸🎸
Dude! Fantastic work and fantastic video. Your videos are freaking incredible. You have a gift for this.
Way too kind! 😊
Man you are funny and i like the honesty in your videos you feel very genuine
VROOM
Thanks!
" vroom ,vroom "Wasn't expecting you to say Nova Scotia brother. Im just over on the end of cape breton. Love what your doing and would love to have a guitar like this. Be it win one or maybe purchase lol. Keep up the work man. Very peaceful and calming to watch.
Meat cove?
@@Notaluthier new Waterford actually down around the sydney area
@@jonfraser13 nice! I’ve spent some time up Sydney, and a few great trips to Ingonish. 🤙
VROOM
Just getting back into guitar after a gnarly hand injury and so stoked I found your channel!
Heck yes! Keep up the awesome work mate!
I believe SLAYER is the band name written in the hair shot :-D
Excellent work.
The fact that you show all the mistakes and how you're just going along with it and still get really cool results makes me feel like I could give this a shot as well. Very cool channel! Vroom!
Vroom.
I enjoy your videos because you are entertaining. I don’t care if you can explain how to build a boost circuit. I outsource that stuff now anyway. And there are many good electronics channels from which to learn.
I enjoy your mistakes, watching you counters my obsessive tendencies and gives me hope that things could just be fun for a change.
The pacing and editing of your videos is top notch, the camera work is well considered, and some of the shots show artistic flair.
Overall incredibly entertaining!
Very kind thanks
Vroom! Your workshop organization stresses me out, but I love the honest restorations!
You and me both!
Vroom, as if i'm not already overwhelmed by learning repairs and building theory
Been eagerly awaiting
This videos is hilarious, keep'm coming man🤘
This is a kick-ass build😊
VROOM, i guess! Wow, was a bit busy and skipped on a few videos of yours and already forgot how charming and a bit surreal (in a good way) your videos are. Thanks for your work, man. Been a fan since the methstang came to be, keep on going!
Thanks a bunch!
The guitar turned out great! Also the band name in your hair obviously says Krakatoa. 😏Anyways, I’d love to see a video of you explaining how to make an overdrive circuit. Vroom!
Best (only) entry into the secret “name in hair contest”
Love the music.
Great chill way to start my Sunday 🤘
Love the ingenuity of your builds, and the no problem only solution aspect. Right on brotha.
Thanks!
VROOM!
Love your stuff!!
VROOM.
Enjoying the channel so far!
I love your style and vibe dude, keep it up.
Good job done...and I chortled frequently at your misfortunes- thank you.
We are in the presence of pure genius.
Agreed! I just found this channel and I'm already looking at this guy as my inspiration
Vroom! Awesome work on this one!
VROOM! Found your channel recently! Love your work.
Awesome, thank you!
Vroom! I really enjoy your videos. Your talented! Rock on dude.
I appreciate that!
For securing smaller ferrules in larger holes I usually use paper masking tape or if I'm feeling really special - teflon plumbers tape. Works like a charm and is easier to remove the ferrules if the need occurs. Highly reccomend.
Your videos are amazing!
I love these sorts of videos. THeir keeping me motivated on my own related project. A guitar with a shatter neck, that was then turne dinto a clock, which I am restoring (and having to make many parts/pickups for!)
VROOM.
Love the channel and love the content. I do not know much about the era of guitars you often show. I love informational RUclips content and this ranks up among my favourite.
Thanks a lot!
Vroom!!! I love your videos man. I feel like 90% of what I know about electric guitars is from watching you. I feel like I learn more bc your videos aren't boring lol. Keep it up I'd love to see you hit 10k
"VROOM" - your videos are great! Thanks!
I love the way you do things and the materials you use. I loathe the modern way of doing things and routinely make things work with what I have on Honda, this is the way. I do have lots of tools but you never have enough and you make do.
VROOOOOOOOOOOOOOOOM!!! love these kind of videos
VROOM 100% Congrats on the 10K!!
Thanks!!
Vroom ! Also I'm so with you on the Kluson Safe Ti Posts, it's a shame they're almost only installed on fender style , 6 inline headstocks. It also removes the risk of ruining your gig bag lining with string ends, which has happened to me with several bags. It looks like nowadays their only 3x3 models are the Mosrite ones and the variant of the concept made by Duesenberg.
Love the production style
Love the videos, love the process entirely and love the outcomes keep it going! Vroom
VROOM VROOOOOOOM VROOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOM
lol loved the methstang vid!
VROOM. Keep the awesome videos coming!
Thanks! Will do!
Vroom. Such a nice video to just chill with.
vroom. would love to learn to make that overdive circuit. definitely would use it for SOMETING sometime
24:30 That's not a guitar! That's a jackhammer!
Awesome Videos, keep it up. Teaching s hard, but everything needs practice ;) I m looking forward to the next ones.
PS: VROOOM!
Dude please please please do the video on the overdrive circuit
wow, feckin great sounds!!!
Vroom, love your humor dude man
great work
this is great, I would love to see how that overdrive circuit works and try and put one in my project bass to give me some grr to go along with the vroom
Vroom!!! Love the design of the 8 sided knobs.
VROOM! Just getting a tutorial on the boosters is win enough for me, but VROOM anyway :)
Really really enjoy your work - greetings from Sunny Salt Lake City!
Peace
Well cool guitar could you re-melt the wax to release the logos?
That would probably work!
Good sh!t, my man. Subscribed. Looking forward to doing something very similar in a Jaguar build I'm doing. This might just get me off my arse and do it...eventually, someday.Also looking forward to more videos from you, maybe put some more effects in there? That would be cool. oh yeah, and VROOM f'n vroooom!!!
Beyond awesome
Vroooooom! Feedback off of it slays🤘
Wash the fretboard, what with? I have a dirty old Kay needs this. Loved the fingerboard on the Methstang. I have a half log sitting in the garage for a lap steel project too.
Just scent free hand soap and a small amount of water
So much for tone wood...less wood=more tone? I would love to hear why the holes were drilled in the body, from the person who drilled them. Great job...VROOM VROOM!!
Those are factory! They are present in several Valco models (airline Supro national etc!) I’d say it’s for weight relief.
Vroom! I'd like to know more about the boost circuit please.
Vroom this is great because I can totally relate to shit not always working out.
Love that parlor guitar!! I completely don't get why fender and Gibson moved away from the safe t tuners in the 70s(ISH)
Truly inspiring! vroom