Just found this video and am very impressed with the information re flaps and stabilizer. Also throttle levels during flight and landings. This video is how a video should be done. Beautiful plane and flight ✈ and very much needed characteristics of flight. Thank you very much.
congratulations nice flight, if I understand correctly you suggest to increase the travel of the elevator +5 mm or 10mm so in total it would be 7 mm of the house + 10mm total 17mm? is that so? thank you
complimenti bel volo, se' ho ben capito tu consigli di aumentare le escursioni dell'elevatore +5 mm o 10mm quindi in totale sarebbero mm7 della casa + 10mm totale 17mm? è cosi? grazie
hello Andy, by my opinion this 2 jets are similar just in electronics... F22 is much easier to fly and to land, you need less power to keep it in the air. F18 is harder to see due to the Blue angels color scheme and is harder to land... with f 22 you can cut throttle and the models came down nicely and slow but with f18 you will have a tip stall if you do not manage properly during landing. hope it helps
Michael Cuthbert sincerely after many flights I didn't see a lot of difference reapect other recent release. With mix throttle you can get 4 Minutes but for maiden I suggest you to set 3.30 at your timer.
Ciao ti scrivo perché vorrei essere aiutato, ho fatto 6 voli in yutto col mio nuovo f18 alte prestazione. Ma al collaudo il primo minuto e 50 andave benissimo ,poi il motore di e fermato ed è caduto. Ho vomprato una nuova fusoliera ed il secondo ed il terzo volo sono andati bene . Un altro giorno ho fatto il 5 volo ed ha avuto lo stesso problema del primo volo,si e nuovamente staccato il motore, le batterie dono nuove Yowoo 6s 100c, ho anche cambiato la ricevente Spektrum. Puoi aiutarmi? Grazie ciao
Ho provato la ventola al banco ,succede che il motore a circa 2minuti mentre ho il gas aperto rallenta notevolmente metto a zero il gas e il motore comincia a emettere bip bip bip bip
@@carlo8336allora è sicuramente un problema di esc, devi cambiarlo perché se fa in quel modo evidentemente va in protezione perché si surriscalda troppo
Appreciate the effort to post this Top rc plane review TRUE CHAMPION
Just found this video and am very impressed with the information re flaps and stabilizer. Also throttle levels during flight and landings.
This video is how a video should be done. Beautiful plane and flight ✈ and very much needed characteristics of flight. Thank you very much.
nice job man, finally a review video worthy of its name, greetings from germany and keep up the good work, cheers
I'm amazed it didn't stall at the speeds you were flying it at. Seen others stall with it at similar speeds.
Nice job on the video. Very impressed with your knowledge and how you present it. 👍👍👍✌🍺🍻
congratulations nice flight, if I understand correctly you suggest to increase the travel of the elevator +5 mm or 10mm so in total it would be 7 mm of the house + 10mm total 17mm? is that so? thank you
Hey guys. We need more of your videos ;-)
I like the video, mine is hopefully coming next week
What will happen just incase you lost the signal with remote to aircraft?
complimenti bel volo, se' ho ben capito tu consigli di aumentare le escursioni dell'elevatore +5 mm o 10mm quindi in totale sarebbero mm7 della casa + 10mm totale 17mm? è cosi? grazie
This blue f 18 jet is called a blue angel
Can you provide more details on the flight characteristics compared to the Raptor?
hello Andy, by my opinion this 2 jets are similar just in electronics... F22 is much easier to fly and to land, you need less power to keep it in the air.
F18 is harder to see due to the Blue angels color scheme and is harder to land... with f 22 you can cut throttle and the models came down nicely and slow but with f18 you will have a tip stall if you do not manage properly during landing. hope it helps
nice video, why don't you use frsky s6r receiver, with stab?
Hello Cobra, I prefer to use a separate Gyro... just for convenience
Gorgeous model!
Alpha10 yes it is!!
@@radiouncontrolledplanes3735 Can't wait until mine comes in... Gonna try 12s 4000 😎😁
Alpha10 unfortunately compartment is not so big! Hope you can do it!!
@@radiouncontrolledplanes3735 It looks to go back a bit so length wise should balance it out. They're pretty short packs. We'll see! :)
Need mixing for elevator with flaps.
Esc 120 A freewing, il motore 3668- 1960 KV, ventola 12 pale originale
Is there a “Return Home” button?
no but thats what you do "return home" with a pile of foam after you find your plane,lol not fun!
Nice review. Has Freewing commented on your elevator throw concerns? Did they make adjustments for the production model?
Flight6677 unfortunately no. This is just my personal opinion. Maybe with a less weight battery it would need less elevator throws
@@radiouncontrolledplanes3735 Thanks for the reply.
Flight6677 it is my pleasure
Great video, thanks for sharing. What flight times are you getting with the Turnigy heavy duty lipo's ?
Michael Cuthbert sincerely after many flights I didn't see a lot of difference reapect other recent release. With mix throttle you can get 4 Minutes but for maiden I suggest you to set 3.30 at your timer.
Thanks, that's good to know.@@radiouncontrolledplanes3735
Ciao ti scrivo perché vorrei essere aiutato, ho fatto 6 voli in yutto col mio nuovo f18 alte prestazione. Ma al collaudo il primo minuto e 50 andave benissimo ,poi il motore di e fermato ed è caduto. Ho vomprato una nuova fusoliera ed il secondo ed il terzo volo sono andati bene . Un altro giorno ho fatto il 5 volo ed ha avuto lo stesso problema del primo volo,si e nuovamente staccato il motore, le batterie dono nuove Yowoo 6s 100c, ho anche cambiato la ricevente Spektrum. Puoi aiutarmi? Grazie ciao
Ciao hai escluso che possa essere un problema di esc? Se il motore si ferma di botto potrebbe esserci un problema di alimentazione
Ho provato la ventola al banco ,succede che il motore a circa 2minuti mentre ho il gas aperto rallenta notevolmente metto a zero il gas e il motore comincia a emettere bip bip bip bip
È poi toccando l' ESC è incandescente non si può toccare
@@carlo8336allora è sicuramente un problema di esc, devi cambiarlo perché se fa in quel modo evidentemente va in protezione perché si surriscalda troppo
Ok ,ti ringrazio
The decals 😒🤦🏻♂️