The Aqara M3 is The Perfect Matter and Thread Device! Well, Almost...
HTML-код
- Опубликовано: 11 июл 2024
- the Aqara Hub M3 is a major leap forward for Aqara, coming at a time when the smart home landscape is changing due to both Matter and Thread. The M3 is both a Thread Border Router, and a Matter Controller for the Aqara ecosystem, which means for the first time, third-party Matter devices will work in Aqara's app. There are caveats of course, so watch the full video to know its current limitations, as well as any issues I had with it.
Yo can read the in-depth written review here; homekitnews.com/2024/05/27/aq...
You can purchase the Aqara Hub M3 from Amazon stores in your region using the (affiliate) links below, which cost you nothing extra but help us buy more products for review, to keep you informed on how products perform.
👉 🇺🇸 Amazon US - amzn.to/3JU08N
👉 🇨🇦 Amazon CA - www.amazon.ca/dp/B0CWLHSKYC
👉 🇫🇷 Amazon FR - amzn.to/3yaB1Uq
👉 🇩🇪 Amazon DE - amzn.to/3WwrssX
👉 🇮🇹 Amazon IT - amzn.to/3WxvelX
👉 🇪🇸 Amazon ES - amzn.to/4dyoeLY
👉 🇬🇧 Amazon UK - amzn.to/44zOVvw
Check out our website for all the latest HomeKit related News, Reviews, Listings, Tutorials and more - homekitnews.com
You can also Follow us on the following social media platforms;
- Facebook: / homekitnews
- Instagram: / homekitnews
- Mastodon: mastodon.social/@homekitnews
- Reddit: / homekit-news
- Twitter: / infohomekitnews
Timestamps:
0:00 intro
0:10 Introduction
2:01 What's in the box?
2:41 A closer look
3:26 Installation options
5:06 P2 Motion Sensor
5:42 Smart AC Control
6:53 Hub Migration
7:48 Third-party control
9:30 Speaker comparison
10:20 Does it work well?
11:10 Pros vs Cons
12:32 Outro
#smarthome #homekit #applehome #matter #thread #homeautomation #Aqara 
Наука
Excellent editing. Very sharp!
Thanks sir!
Great video, this gave me hope that I don't have to replace my Leviton smart switch. I was having problems connecting to HKSR.
Great video, going to get this as soon as Amazon DE has it back in stock
It sold out already? Amazing. Thanks for the feedback.
Great video as always 👏 I've been using the M3 Chinese version, and it's working great around here. I was also able to connect a couple of Tuya Matter devices and the Yeelight Cube. I wasn't aware that Matter Hub support was being released. This is going to be great to use with Aqara automations!
Thanks very much. I did see that Tuya plugs were compatible, but as there are so many Tuya devices I didn’t want to mention it without knowing which devices worked and which didn’t. Which Tuya Matter devices are you using?
@@homekitnews I was able to pair a Tuya Plug with USB, it shows as 2 controllable devices within the App, a HaveDeer Tuya RGB Lightbulb and all the Zemismart Matter Lightbulbs (RGB 7W, RGB 9W and the LED fillament one). After I saw yout video, I could pair the Zemismart Matter M1 hub as well. I tried to pair the Zemismart Thread Roller Shade but got stuck in the "Registering device" screen and after a couple minutes the app crashed.
Excellent video! I love how you lay these videos out and test some many different functions. We currently have an M2 and are happy with it.
Weird question for you but is there any point to matter or thread if a home is 100% HomeKit and has no WiFi connectivity problems even on the edges of the house? Only thing I could think of was the offline functions but I don’t know that I’ve ever needed that.
Hi, the M2 is still a great hub, so I don’t necessarily think you need to get rid of it anytime soon. When it comes to Matter, HomeKit already does much of Matter offers, ie local connectivity, so Matter mostly benefits Google and Amazon users, who have typically relied on cloud connectivity. So the offline feature is something you already have essentially. To coin an old adage; “if it ain’t broke, don’t fix it”!
Beautiful job is always Simon! I may have missed this part, but is there a limit to the number of devices that can be bridged over Matter like the SwitchBot Hub too?
Hi Dustin, the M3 doesn’t port devices over to HomeKit using Matter, so the only devices that automatically get exposed to HomeKit are the standard Zigbee devices. In this respect it’s different to SwitchBot Hub 2, as it’s a Matter Bridge, whereas the M3 is a Matter Controller. It can act as a Matter enabled Bridge, but it’s much the same as is the case for Zigbee currently.
That makes sense. Are there any limits to the number of IR devices that can be bridged?
@@myHomeKithome Currently, only the AC controller is exposed to HomeKit, nothing else unfortunately, so the SwitchBot and the Nature Remo Nano are better in this regard.
If you are already have a M2 hub and switch over to the M3 hub you mentioned that the M2 hub is automatically reset to factory defaults. Other that using the M2 hub in perhaps a different location (i.e. cottage) can it be reused for something else - like a standalone IR blaster for example ???
Thanks for sharing this video.
I still like the M2 and it definitely would be wise to keep it running. As IR can only trigger devices in its line of sight, having an IR blaster feature in another room (ie the M2) would be very handy. I also personally like to spread my Zigbee devices across a few hubs to segment and limit the possibility of devices going down if a hub fails, so there’s that too.
Good video 😊 can I use ac controller with Apple HomeKit ?
Yes, the AC control is exposed to Apple Home as long as you add the M3 using the Matter QR code, not the HomeKit QR code.
@@homekitnews thanks. I have got aqara hub m2. If I watch a video about this ac controller, I want to buy aqara m3
I am so happy right now-I am having the exact same issues! I also have Belkin WeMo and Nanoleaf smart plugs and smart bulbs, respectively. After adding the M3 hub to My Home and then updating the firmware of those other smart devices, they all slowed down. I took the time on one of my weekends to delete everything and completely redo my smart home setup from scratch, as in re-adding everything to a completely new home after having deleted the old home and the iCloud backup. Then, everything started working just fine again. I'm talking about the Nanoleaf and smart products, right? However, about a week after I did that, there was another firmware update. After updating the firmware on the M3, those devices from Belkin and Nanoleaf are now slow to respond again. I don't want to take the time to redo it all yet again, but I'm thinking that I will have to at this point. Although, I am waiting for the next firmware update as it has already been a few weeks since the last one. I will do it after that, so I have the most amount of time to see if the devices work correctly for longer than a week after setting them all up again.
Thanks for taking the time to let me know all of this. I may try the same thing. Do you notice that the affected devices sometimes work fine, and not other times? This has been my experience so far. as far as updates go, I have since seen that they’ll be adding support for more Matter devices - after all the criticism they received on this from many reviews. - but i don’t think that involves an update for the hub, only the app itself, when it arrives. Thanks again.
Nice video, can matter-paired devices trigger the aqara security system?
Thanks. After double checking, it seems that the Matter devices I have connected can not currently trigger the security system. Strangely, this is even the case with their own P2 Motion and contact sensors.
For an upcoming system in a home, I’m planning a 95%+ all Apple and Aqara setup from scratch . Do you recommend going with the M3 straight away?
If you aren’t planning on utilising Thread or Matter, then it might not be worth it, although due to the many improvements over the M2, and Matter/Thread being the standards going forward, I think it’s wise to get it for future proofing your home.
great video! just out of curiosity, would the G3 and M3 hubs allow controlling the AC temperature through HomeKit?
Thanks. Only the M3 offers this function, and even then only if you add the M3 using the Matter QR code, not the HomeKit QR code. You can control your AC with the G3, but full control is only available in the Aqara app.
@@homekitnews if i connect the m3 hub with matter code, there will be direct temperature control in the homekit app? like a simple + - bar? and the G3 hub won't do this, even by exposing scenes?
@PraneetTulshyan exposing scenes via the G3 limits you to a specific feature. You could create a series of scenes for different features, but it’s not really the equivalent of direct control of the AC in the Home app. For the M3 you get simple mode control plus temperature adjustment. To make sure the AC works with temperatures correctly, you also need to add an Aqara temperature sensor to the M3. It’ll work without one, but then it’ll never give you the correct reading on the AC tile in the Home app.
Excellent coverage of the device, especially wrt to Matter. I shouldn't be surprised that it's Matter support is so shoddy, but it's a dang shame. I'd been looking for this device for some time to consolidate all my Smart Home devices, but I'll be waiting some more. I learned long ago to never, ever buy a device on promises, and at this point, Aqara's promises to support more matter devices is simply unfulfilled promises with no weight.
It is a shame Matter support is severely districted right now. I’m not sure why, but I think it’s the ecosystem that’s not ready rather than the hub.
Im currently using aqara hub m2 with all aqara products to expose them to homekit do you recommend to replace the m2 hub with m3 ?
If you want to make use of the M3’s additional features, as well as make use of Aqara’s platform for Matter devices, then it’s definite purchase. If you only use Zigbee devices or don’t fancy Matter, then it’s possibly not so important right now.
How do I get the M3 to show as a thread border router in the Eve app?
Hi, to see more details in the Eve app for any Thread Border Routers, you do need at least one powered Eve device, like the Eve Energy Smart plug. Without one of these types of devices, you can only see basic Thread info.
I’m sorry…. HOW MUCH!… £130, I was expecting £99 tops since the M2 is £55 (£46 on sale). If it could take Zigbee devices from ANY manufacture, like IKEA (without a Philips Hue Hub), then maybe but as it is, it’s far too expensive in my eyes. I was hoping to ditch my IKEA hub and have everything ran through one hub, the limited third-party Matter support is laughable for the price.
Eve energy EU didn't connect to M3 Chinese version
I’m not sure why, but I’ve had confirmation that the EU version does work on the international M3. However, the UK version doesn’t yet apparently, so it could be something they’re adding to regions and servers over time.
@@homekitnews I was able to add the socket after the last firmware update of M3 hub and Aqara app
@@AlexeiTiosa that great. Glad it works finally.
This device would not pair with my IR fans even though the brand is supported. Support was no help and went quiet.
Hi, when you say they won’t pair with your fans, do you mean the IR signals that are supposed to be compatible don’t work?
I’m tired of these clearly sponsored videos with the exact same talking points with no information on whether or not it can integrate with third party zigbee devices.
This video was not sponsored. In fact I never do sponsored videos. No aqara hubs can integrate third party Zigbee devices.
It is strange that I can’t expose IR device via Matter M3 to Apple Home. Switch/fan/light.
Yes, I’m not sure why they haven’t implemented this when other devices, like the SwitchBot hub 2 and Nature Remo Nano can do this.