Well i got thru all this build and was almost successful. I had a few troubles 1 being the HML file not being able to be read when picking machine. The folder and the XML file must read the same name exactly don't miss a thing .So i get it to work machine comes in except my machine is like an inch big and my part is like 20 inches bigger. So im about to start over the model is scaled in solid works correctly. I saw another vid that said you have to build in metric or it wont work. Well that cant be true as i see inches all over this build. I did convert the file to a Parasolid file from solid works . So now im going to convert the file to metric the send it as a metric Parasolid file. . Then create the STL files from Mastercam to a folder. Do i have to scale it in mastercam ?
Open the XML file in the folder with all the components, any text editor will work, with in the first few lines you'll see either inch or metric. Just make it the opposite and save the file. Should be good after that
The steps would be the same as this video. Only difference is adding the extra rotational axis, which you should be able to handle once going through these 2 videos.
Thats fine. You can export all entities as one stl. You can also add multiple bodies to mach sim for each axis but you only really need to do this if you want to specify them as separate colors...otherwise just export them all as 1 stl
I've been building my own machine for Machine Simulation in mastercam X9: HAAS trunion TRT-160 into HAAS VF4-SS. I did something wrong and I modified the "5_5AXGEN_VMCTTAB" and "5AxHeadHead" (I thought I copied them and then modified, but I modified the originals ). Could anyone please attach the XML and STL files for that machines? It was my stupid fault... Maybe the X7 or X8 files are good as well. Thanks, and best regards!
I don't have anything that old installed anymore. If you have the original install media, re-installing should replace those files. Also, not 100% on both xml and stl, but I don't think there is any difference in the xml files over the years. An xml file from 2022 is exactly the same as the one in 2023, so maybe you can install the free HLE and grab the machine files from there and stick them in the older version? I have no idea if that will work for machine files from 2023 into X9, just a possible solution if you're stuck.
Thanks a bunch! I just started working with mastercam, and did the free online certificate classes. I’ve really only ever programmed in Surfcam or FeatureCam so I’m pretty unfamiliar with it still. Amazing how your vids, and vids from Titan of cnc are better than anything on mastercam edu....
1. Download the vice from the manufacturer 2. Click the file button in the top left hand corner of the screen 3. Select merge 4. Locate the file (if the file isn't showing up when you search for it, make sure you change the file type in the bottom right corner.. change it to all files, it's set to only show Mastercam files default)
I will be going into this bit in Part 2 of this, specifically when it gets into setting the right offset for the fixture being loaded into the machine and options as to including in the machsim files or Mastercam part file. Chazzs' comment should get you on track though.
if your reseller doesn't have all these already you need to find a new reseller lol. still, it's interesting to see done. it's too bad mastercam can't do actual gcode verification because this is way less of a clusterfart than setting up vericut is.
They may have your machine/rotary combo, they may not. They could absolutely build it for you if needed. At least with this info you can modify on your own if what you get is not exactly what you need...besides...I guarantee they don't have the LegoMan Machine Simulator! 😂That one is 100% DIY Gcode sim...if the post is tied into MachSim, it can be very close to simulating gcode.
Thank you for this video. Do you maybe know where I can find 3d models for the mikron hpm 450u 5axis milling machine?
I literally spent the day doing this same thing for a VF2, VF3, VF4, VF6, & UMC-750. Great minds think alike lol
Thanks bro, I will try at work. At home I only have the demo of mastercam.
👍 Its great Haas puts all those files right up on the site!
Well i got thru all this build and was almost successful. I had a few troubles 1 being the HML file not being able to be read when picking machine. The folder and the XML file must read the same name exactly don't miss a thing .So i get it to work machine comes in except my machine is like an inch big and my part is like 20 inches bigger. So im about to start over the model is scaled in solid works correctly. I saw another vid that said you have to build in metric or it wont work. Well that cant be true as i see inches all over this build. I did convert the file to a Parasolid file from solid works . So now im going to convert the file to metric the send it as a metric Parasolid file. . Then create the STL files from Mastercam to a folder. Do i have to scale it in mastercam ?
Open the XML file in the folder with all the components, any text editor will work, with in the first few lines you'll see either inch or metric. Just make it the opposite and save the file. Should be good after that
Nice video can you make one showing how to make a lathe as well as a mill/turn?
HI...caminstructor...do you have a video ..how to build virtual UMC750 hass on mastercam?
The steps would be the same as this video. Only difference is adding the extra rotational axis, which you should be able to handle once going through these 2 videos.
@@CamInstructor How about Haas ST-20Y
Got confused on how to actually accomplish this in a machine like the HAAS UMC750
the same entities have to be set as X Y and Z
How did you make X axis Y axis and Z axis a single component from the assembly?
Its all in the video. You need to export sections of the assembly and then bring those into machsim.
@@CamInstructor But I have 44 entities in Z, 94 in X, 8 in Y, and you only have one entity in each level
Thats fine. You can export all entities as one stl. You can also add multiple bodies to mach sim for each axis but you only really need to do this if you want to specify them as separate colors...otherwise just export them all as 1 stl
ITS A LEGO GUY PUNCHING HOLES LOL!
I've been building my own machine for Machine Simulation in mastercam X9: HAAS trunion TRT-160 into HAAS VF4-SS. I did something wrong and I modified the "5_5AXGEN_VMCTTAB" and "5AxHeadHead" (I thought I copied them and then modified, but I modified the originals ). Could anyone please attach the XML and STL files for that machines? It was my stupid fault... Maybe the X7 or X8 files are good as well.
Thanks, and best regards!
I don't have anything that old installed anymore. If you have the original install media, re-installing should replace those files.
Also, not 100% on both xml and stl, but I don't think there is any difference in the xml files over the years. An xml file from 2022 is exactly the same as the one in 2023, so maybe you can install the free HLE and grab the machine files from there and stick them in the older version? I have no idea if that will work for machine files from 2023 into X9, just a possible solution if you're stuck.
@@CamInstructor Good idea. It's working!! Tank you, Sir :)
Wow nice video. Lots of work but good explanation!
Thanks!
Excellent video.
Thanks!
Thanks for the info. I’m new to mastercam, and wanted to learn more.
Glad it was helpful! Stay tuned, lots more to come. 👍
please i need postprocessor control siemens lathe
You can download posts from the Mastercam website or contact your reseller.
I literally got all the way through, made all those deletes and couldn’t save the STL file type because I have an educational version at home.
You can get around the HLE rule of not being able to export STLs. I made a video about it here...
ruclips.net/video/h570WYltz6w/видео.html
Thanks a bunch! I just started working with mastercam, and did the free online certificate classes. I’ve really only ever programmed in Surfcam or FeatureCam so I’m pretty unfamiliar with it still. Amazing how your vids, and vids from Titan of cnc are better than anything on mastercam edu....
How do insert A axis to Mastercam
The 2nd video goes through assembling the machine and that includes the A axis.
How can we add a vise to a UMC 1000?
1. Download the vice from the manufacturer
2. Click the file button in the top left hand corner of the screen
3. Select merge
4. Locate the file (if the file isn't showing up when you search for it, make sure you change the file type in the bottom right corner.. change it to all files, it's set to only show Mastercam files default)
I will be going into this bit in Part 2 of this, specifically when it gets into setting the right offset for the fixture being loaded into the machine and options as to including in the machsim files or Mastercam part file. Chazzs' comment should get you on track though.
Thanks a lot
Most welcome
if your reseller doesn't have all these already you need to find a new reseller lol.
still, it's interesting to see done. it's too bad mastercam can't do actual gcode verification because this is way less of a clusterfart than setting up vericut is.
They may have your machine/rotary combo, they may not. They could absolutely build it for you if needed. At least with this info you can modify on your own if what you get is not exactly what you need...besides...I guarantee they don't have the LegoMan Machine Simulator! 😂That one is 100% DIY
Gcode sim...if the post is tied into MachSim, it can be very close to simulating gcode.