👍👍👍👍 works good man...and glad to see your getting rain up there... there was smoking blowing in down here from up there somewhere... I don't watch the news... but anyway 👍👊
Thank You. I saw another installer using a portapower pulling cylinder. I got the kit, just have not got around to building the frame. I will check out the pulling ram. My next project is I bought a Harbor Frt. "Badland" jack it got big wheels, going to cut a section out of a 22.5 wheel weld to bracket to make wheel hub dolly. I am 78 and just have to admit father time is nipping at my wheels. The crane makes easy work of disc brake seals and rotors on the truck but I need something for trailers. You make RUclips worth while!
@@PrairieMechanic I checked out the Vevor cylinder. I am going to follow your build. I think I will get the pump, and the three Vevor cylinders. Thanks!
@@billcovert3473 if you look, there is another small piece of pipe with a hole drilled in it and another pin between the pipe and the back side of the pin and when you start pulling the pin this other piece of pipe will jam up and also pull the outer bushing at the same time. Same idea with installation. If you don’t use that it will just pull the new pin out of the new bushing
I agree with you. Not the best at editing. Could also be my program I am using or my wifi but videos any longer or with higher pixel take me upwards of 2 hours to upload. Suggestions welcome. 😃
Thank you! I followed your build and have it completed.
👍👍👍👍 works good man...and glad to see your getting rain up there... there was smoking blowing in down here from up there somewhere... I don't watch the news... but anyway 👍👊
Thank You. I saw another installer using a portapower pulling cylinder. I got the kit, just have not got around to building the frame. I will check out the pulling ram.
My next project is I bought a Harbor Frt. "Badland" jack it got big wheels, going to cut a section out of a 22.5 wheel weld to bracket to make wheel hub dolly. I am 78 and just have to admit father time is nipping at my wheels. The crane makes easy work of disc brake seals and rotors on the truck but I need something for trailers.
You make RUclips worth while!
Thanks for watching.
Brute force catches up with a guy
@@PrairieMechanic I checked out the Vevor cylinder. I am going to follow your build. I think I will get the pump, and the three Vevor cylinders.
Thanks!
Question; once you pull out the pin on the removal, How do you remove the outer sleeve?
@@billcovert3473 if you look, there is another small piece of pipe with a hole drilled in it and another pin between the pipe and the back side of the pin and when you start pulling the pin this other piece of pipe will jam up and also pull the outer bushing at the same time.
Same idea with installation. If you don’t use that it will just pull the new pin out of the new bushing
@@PrairieMechanic Yes, went back re watched. Thanks. I ordered the vevor parts.
Nice build. Would be nice if the video wasnt only 480P though :)
I agree with you. Not the best at editing. Could also be my program I am using or my wifi but videos any longer or with higher pixel take me upwards of 2 hours to upload.
Suggestions welcome. 😃