Love the colors! A nice trick for bubbles is spraying the mold with alcohol before you pour. Before the alcohol evaporates, squish the whole mold. Get the alcohol on the whole surface and squish the stem and feather edges, where your gold leaf is, between your fingers. This lubes the silicone so the resin with the gold leaf will slide right down with no mess. You’d have to pour your gold leaf first and while that is curing, paint the mica on. It’s a win/win because if the gold flakes are curing for a bit before you pour the rest, they won’t float. 🙃. Then you can pour a thin layer of clear and drop the alcohol inks. I pour some clear, all around the “stem”? I don’t know what that ridge in the feather is called, but pour around it so the resin is sliding don the sides and alternate between ink drops, clear, ink drops, clear…until it’s full! This turned out beautifully without doing any of that. You might get the look you want doing what I suggested. I learned those tricks from several different people so I don’t know who to give credit to. Looking forward to seeing you make more of these.
I think your leaf turned out beautiful 😍!! Love blue and gold! I have this mold, I put abalone shells in it! Was quite pretty! Great share, your videos are super informative and inspiring!
You can put the little rubber bumper pads on the bottom they come with adhesive on one side and it makes it so the little dish won’t slide around everywhere
Hi Michelle. This turned out beautifully. I have this mold and did a similar technique around the edge. I let the gold leaf cute for a couple hours so it wouldn’t move around. Hope that helps even though yours turned out great.
I think the feather is awesome. I really enjoyed watching your videos, and how you implement your thoughts into different molds. I hope you purchase the bathtub mold on temu, I would love to see how you would design it.
The colors are just gorgeous in this feather!
Love the colors! A nice trick for bubbles is spraying the mold with alcohol before you pour. Before the alcohol evaporates, squish the whole mold. Get the alcohol on the whole surface and squish the stem and feather edges, where your gold leaf is, between your fingers. This lubes the silicone so the resin with the gold leaf will slide right down with no mess. You’d have to pour your gold leaf first and while that is curing, paint the mica on. It’s a win/win because if the gold flakes are curing for a bit before you pour the rest, they won’t float. 🙃. Then you can pour a thin layer of clear and drop the alcohol inks. I pour some clear, all around the “stem”? I don’t know what that ridge in the feather is called, but pour around it so the resin is sliding don the sides and alternate between ink drops, clear, ink drops, clear…until it’s full! This turned out beautifully without doing any of that. You might get the look you want doing what I suggested. I learned those tricks from several different people so I don’t know who to give credit to. Looking forward to seeing you make more of these.
Just lovely. So glad I found your channel today.
Thank you!! I'm glad too!!
I think your leaf turned out beautiful 😍!! Love blue and gold! I have this mold, I put abalone shells in it! Was quite pretty! Great share, your videos are super informative and inspiring!
Awww thanks ☺️
Turned out gorgeous
Thank you!!
Beautiful results, was fun watching!
Thanks!! I'm glad you watched!
Turned out beautiful.
You can put the little rubber bumper pads on the bottom they come with adhesive on one side and it makes it so the little dish won’t slide around everywhere
Hi Michelle. This turned out beautifully. I have this mold and did a similar technique around the edge. I let the gold leaf cute for a couple hours so it wouldn’t move around. Hope that helps even though yours turned out great.
Yes! Thank you!! I'm usually way to impatient LOL
That is so beautiful. My favorite color is purple. I would love to see you do some things in purple when you get a chance.❤
Thanks! Absolutly I will definatly do that!
I'm sure you already know by now, the bottles are visible in the molds. I got this mold and am able to visually see where any bubbles form.
Look good
I think the feather is awesome. I really enjoyed watching your videos, and how you implement your thoughts into different molds. I hope you purchase the bathtub mold on temu, I would love to see how you would design it.
I have the bathtub!! I’ll do a video on it!! Thanks for reminding me I have it LOL They all get forgotten in my drawers!
@@glitznglitterbymichelle1 I am looking forward to it. Thank you,
Which brand resin u use
I use Let’s Resin brand. Always linked with a discount code 👍