Great breakdown. It is fair to say that for most regular joes, the price would be around 8ksh for the labor. However, still better than a 60k charger....
you're very fortunate to find a type s engine and trans from the junkyard and tsx engines are a hit or miss also. That defiantly helped on the cost for the build or else that k24a2/type s trans engine combo is roughly around 2k itself if buying off the streets or a local shops.
Ay man I honestly LOVE YOU. I was about to give up and move my eg k swap project yet again further into the future, because i figured it was too expensive. This gave me again motivation to stick to it, and I will be swapping my eg in the next 6 months
Love your builds man your videos are awesome, super relatable! Working in the garage with jacks and all but you always seem to make a clean build🔥🔥 keep it up big bro💯💯
Hell yeah, this is exactly the type of builds I do. I think the key is slowly buying the parts and utilising junk yards. Also reach country has different popular cars. Here in Australia the rsx/dc5 integra (particularly the s and r) never show up at junkyards as we didn't get many and they are worth serious coin. Anyway keep up the great work Dana! Can't wait to see blueberry with VTEC and more boost! Maybe some rods and really turn it up?
@@taraishot100 I reckon they would charge 3 to 5k ish plus parts. But they'll want you to get specific parts which they know work. I think the specific parts both factory and aftermarket make some of the huge conversion costs you see here. PS it's the easiest conversion you'll ever do so if you want to learn a K series Civic is the best one to diy.
@@teamaxlestands you can easily double the number. For 3k you might aswell suck the mechanics manhood for that insanely low price. As a matter of fact Ill suck yours if you send me a shop to do it for 3k
Dope thank you always helping us out💯Try out the level7 oil cap with bong fittings for the oil lines, also American volt has great cooling systems I use there fans all the time.
Looking forward to building my turbo k24 sandrail. I had to do a few more things. I got the forged internals and re sleeved. It's not going to be a cheap process. I'll also be running meth injection to keep temps down since I'll be running hard af on the dunes and it might be up to 90 degrees outside.
I've been searching for a huge cold intake for my k swap. The one I want purchase a carbon fiber one. The piping is huge just dont know the brand? Do you know which one I'm talking about?
Hey man I have Nippon pistons for my b18b1 LS-vtech and I’m not sure what my ring gap should be considering I plan on doing turbo or nos, got any thought?
I live in New zealand and theirs no way we can buy stuf this cheap. Just the k24 in a junk yard hears 2k. Just 1 stainless 3 inch is $45. I'd say things hear are 4 times the prices you get them 4. Plus shipping.
It’s crazy the amount of people that watch the same tubers. 😂 I posted to db to reach out to Dana for the EF. He would get it all squared up in. I time.
@@Basscouch I'm currently having a k24 being built for boost myself and all the turbo parts (turbo, manifold, etc) already cost about as much as his entire swap.
I really wish someone would tell me the issue with the k swap mounts in conjunction with power steering.........I'm deleting ac.....but have to have PS.....PLEASE reach out to me anyone with info ...I'm running k24a2 ..hasport mounts
@@tylermason5520 barely driven cars with ps, and I could justify the ugly engine bay for that minimal bump in comfort when parking. Did you ever race without power steering? its 10x better.
That’s nothing close to what a normal person would pay. You get some much gifted to because of your videos like be real for once. That’s going to cost at least 8k double the price you lead people to think it’s a budget/ affordable build. Yea it’s going to cost you that much, that has sponsors. Not just anyone can do that.
if you want to put a jdm k24 plus turbo its going to be close to 10k. i dont agree its going to cost that much all the time, but if you can do the work yourself it really helps with the finale price.
Bro for the love of God please don't wear the beanie and hoodie when it is 75°-80° in Cali. I don't want you getting heat stroke or sum shit. No Dana.... no honda content... then wtf do we do... lol stay cool my friend.
Great breakdown. It is fair to say that for most regular joes, the price would be around 8ksh for the labor. However, still better than a 60k charger....
Chargers are mad when they get gapped by couch change
Charger. Lmfao.
With a 100 shot of nos on top you’d be slapping scats
This is clean af for a 4k kswap turbo eg. Best budget car.
nobody on youtube can do a quality Honda on a budget like Dana
that's cause prices are crazy everywhere else, a junkyard motor and trans in my area are going for 1500 each minimum 😢
you're very fortunate to find a type s engine and trans from the junkyard and tsx engines are a hit or miss also. That defiantly helped on the cost for the build or else that k24a2/type s trans engine combo is roughly around 2k itself if buying off the streets or a local shops.
Dam it looks great hard work always pays off
Tomorrow I will buy a 00 civic lx thanks to your videos!
Same thing happened to me a couple years ago. Now I have a 9 second ripper that keeps up with the Tesla Plaid. Youngstaic is such an influence er.
@@Basscouch Just drove and towed her 4 hours! I am excited as all can be to start this project!
@@Vader111797 Yay!!!!! Good Luck on the build brother!!!
Ay man I honestly LOVE YOU. I was about to give up and move my eg k swap project yet again further into the future, because i figured it was too expensive. This gave me again motivation to stick to it, and I will be swapping my eg in the next 6 months
Did you end up doing the swap?
@@meen5395 damn. I did not. If anyone reads this months from now, please ask again
Spot on. If you know what you doing etc. Spending big bucks is not always needed.
LOVE this breakdown. ADD your marvelous fab work PRICELESS!
Thanks for the breakdown of everything you did with project blueberry,Dana.............
Progress is better than no progress 💯 👌
Love your builds man your videos are awesome, super relatable! Working in the garage with jacks and all but you always seem to make a clean build🔥🔥 keep it up big bro💯💯
Thanks for this whole playlist Dana! Inspiring.
Hell yeah, this is exactly the type of builds I do. I think the key is slowly buying the parts and utilising junk yards. Also reach country has different popular cars. Here in Australia the rsx/dc5 integra (particularly the s and r) never show up at junkyards as we didn't get many and they are worth serious coin. Anyway keep up the great work Dana! Can't wait to see blueberry with VTEC and more boost! Maybe some rods and really turn it up?
I live in Australia to how much do you think it will cost to do k swap if I took my civic to a mechanic here?
@@taraishot100 I reckon they would charge 3 to 5k ish plus parts. But they'll want you to get specific parts which they know work. I think the specific parts both factory and aftermarket make some of the huge conversion costs you see here. PS it's the easiest conversion you'll ever do so if you want to learn a K series Civic is the best one to diy.
@@teamaxlestands you can easily double the number. For 3k you might aswell suck the mechanics manhood for that insanely low price. As a matter of fact Ill suck yours if you send me a shop to do it for 3k
So what was the diagnosis of the eg not hitting vtec?
Project Blueberry looking like butter!!
Dope thank you always helping us out💯Try out the level7 oil cap with bong fittings for the oil lines, also American volt has great cooling systems I use there fans all the time.
Which junkyard???
Would you ever consider doing a awd k on a budget?
Car is very inspiring. I'm planning to build and kswap turbocharger eg as well, in Thailand.
Your videos are great man. Keep going dude. Always.
Thanks for the video. I’m thinking about doing a k swap on a 97 civic coupe.
Thank goodness I’ve been asking 😅
Thank you, I’m going in on a K20z3
Great video! ThT is a nice budget build! I’m all for that!! ✅
What's up buddy ?
Hey Victor!!! Nice to see you here!! Hehe
@@BulliKid i go where the cool honda's are
I’m far from cool but appreciate it!! 👍👍
Nice.. was wondering where did you get the EG shell? I had one like that I sold back in 2008 with B series in it.
Yo Dana this is a killer build.. I got a k24 in my ej but trying to find axles
Looking forward to building my turbo k24 sandrail. I had to do a few more things. I got the forged internals and re sleeved. It's not going to be a cheap process. I'll also be running meth injection to keep temps down since I'll be running hard af on the dunes and it might be up to 90 degrees outside.
Love ur channel bro..what junkyards you go to?? Ones down here in la a long block at lkq going for about 800$ 🤔
Nice work. That is sweet!
I’m assuming you’re in California for the comment you made earlier in your video about the exhaust, so how does the smog work?
are you using the import direct branded axles? If so, how are they holding up and any issues?
I’m 20k deep in a 2jz build for an is300 and it’s still on jack stands
Lol I'm deeper than that in my k crx but it's running strong like bull. Good luck on ur build!
@@ramonbriones4487 it’s far from finished lol cause lord knows these jz’ builds accumulate on jack stands alone 🤦🏿♂️😂
Cant wait to start my k24 build and use my life savings😂😅
@@lolly77 that's wut it's gonna cost ya lol
@@itsreallytheo hope there's been a little progress lol
That’s a huge bang for the buck!
I've been searching for a huge cold intake for my k swap. The one I want purchase a carbon fiber one. The piping is huge just dont know the brand? Do you know which one I'm talking about?
What axles you use for krx ??
Hey man I have Nippon pistons for my b18b1 LS-vtech and I’m not sure what my ring gap should be considering I plan on doing turbo or nos, got any thought?
What is your wheel and tire setup?
You need to make a shirt that says cut away from yourself not towards yourself. I'll buy some cuz I love it. It's freaking hilarious.
Did u fix the v-tec problem how much you asking for blueberry
fire brah! love it!
da eg looks good👌🔥
is it smart to do this build in cali? state reffed is the only thing scaring me. all i need is 300hp
thanks for the info 👍
Lets goo!!!
200 bucks for a K24 fml, people asking 500 for D16 in the UK
So when you going to drag it and see if you get it to go Tens.
bro what junkyard do you go to i want to swap my civic🙏
I live in New zealand and theirs no way we can buy stuf this cheap. Just the k24 in a junk yard hears 2k. Just 1 stainless 3 inch is $45. I'd say things hear are 4 times the prices you get them 4. Plus shipping.
How did you find a type s transmission so cheap!?
Wish I had ur skills nice k24 hatch build
Good thing Dana doesn't drink and wrench otherwise more money on beer and broken parts lol. Blueberry is my favorite project so far.
You should help db garage to get their homdas ef running, looks bravis need alot knowledge shine on him
It’s crazy the amount of people that watch the same tubers. 😂
I posted to db to reach out to Dana for the EF. He would get it all squared up in. I time.
Yessir crazy , Dana can help them out and get them EFs running good for DB
This 2 are some of my favorite tubers
@@RestauracionEnCasa do you also watch CRXSeth?
I watch him once in a while, he is good with his work
that is nice car
Link to the spal fan?
What axles did you use?
Goat! Where r u from!
Cut away from yourself...not towards yourself lol
Me getting out of commission for a week when I actually made a cut on my hand ..... rip least I didn’t lose anything still bleeding of course
I know this, but I still cut towards myself. After the cut I'm like I know better.
Where do you leave?
Turbo k for under 5k is baller af fix that vtec smoke some srt8 lmfao
Hey Dana! I just moved back to cali. Do you know anyone selling a cheap project Honda?
@@The_Crx what city and how much? I'm in the bay area.
@@The_Crx I’m also in the Bay Area. You got fb? I wanna see pictures
@@The_Crx I don't have social media besides RUclips lol.
@@The_Crx sounds good to me. I'll be on the lookout.
@@The_Crx let me know when you post it.
Hi Dana 😊
How much will you sell for?
Holy shit that's cheap. Being resourceful and having the knowledge really helps huh
Seriously.. I just made a comment on how I have 21,000$ into my old civic.
@@Basscouch I'm currently having a k24 being built for boost myself and all the turbo parts (turbo, manifold, etc) already cost about as much as his entire swap.
@@vongdong10that's nothing lol. It'll just keep going up 😅
I spent 5k on my b series swap. But I did pay a mechanic to swap it
How much was the service cost?
@mattmohler3856 1500
@@mattmohler3856 but that's a full exhaust and a hush performance cable to hydro conversion also .
👍👍
I really wish someone would tell me the issue with the k swap mounts in conjunction with power steering.........I'm deleting ac.....but have to have PS.....PLEASE reach out to me anyone with info
...I'm running k24a2 ..hasport mounts
why do you need ps?
@MaybeKian how you ever driven a car without it? It's alot nicer with it..
@@tylermason5520 barely driven cars with ps, and I could justify the ugly engine bay for that minimal bump in comfort when parking.
Did you ever race without power steering? its 10x better.
Bro and I spent 2 on a b20b swap in my ef lol
How you get away with that in CA?🤯
🤙🏽🤙🏽🤙🏽
Does a build like this, pass emissions?
Would think it's fair to say no lol.
I’m genuinely asking, why is that?
No catalytic converter.I would say NO
If you have an Ek to k swap you will spend a bit more also
4k for a build is insanely cheap. I’ve got 5K in just the 5.3 I have. Not including drivetrain and chassis or turbo setup lol
Like #420. #SaveTheEG
Man if the junkyards in texas charged what you get charged I wouldve been k a long time ago
That’s nothing close to what a normal person would pay. You get some much gifted to because of your videos like be real for once. That’s going to cost at least 8k double the price you lead people to think it’s a budget/ affordable build. Yea it’s going to cost you that much, that has sponsors. Not just anyone can do that.
if you want to put a jdm k24 plus turbo its going to be close to 10k. i dont agree its going to cost that much all the time, but if you can do the work yourself it really helps with the finale price.
✌🏻🇳🇱
How you register these cars? If I attempted to register blueberry Gavin Newsom would personally come kick my ass.
Tag
F###ck.. In Germany an engine from the junk yard would still cost you over 1000$ (same calculation for the other parts)..
Do once do it right. Poor man pays twice
It can cost way more when you don’t know what your doing so there really shouldn’t be a number right lol
thats such a joke..if u want to do that here in germany..15k+ only engine and turbo stuff..if u want to drive it legally on the streets..
I’m already at 9k lmao eBay ain’t bad but I don’t trust it for some stuff especially if your trying to make reliable Hp
dont knock it till youve tried it
Sponsored by eBay motors
That’s a 93
Thanks for that awesome break down of build list for project Blueberry 🫐🫐🫐!!!! Keeping it 💯
Bro for the love of God please don't wear the beanie and hoodie when it is 75°-80° in Cali. I don't want you getting heat stroke or sum shit. No Dana.... no honda content... then wtf do we do... lol stay cool my friend.
Yup thats cheap man cant beat it
@calualu #music 👀