Thank you, this is a great explanation. This drive uses a very elaborate and sometimes illogical way to set it up, and the programming manual is huge. The digital manual is stylized which makes searching for settings impossible. I finally set it up via simple motor run, Conf > Full > Sin- i believe. I'm Dutch and sometimes your English is a bit hard to follow, but you always make very useful videos, i loved that you showed your control button set up, Thank you again
Hello Fellow colleagues. If you enjoy the video please click that like button and if you did not, dislike it and let us know in comments, what was, that made you not happy with the content, so I can learn from it and make better videos for you in the future. Have a great day everyone.
Hi I've program a drive to run forward and reverse using a potential meter, can you advise me on how program a drive to run forward using potential meter and run in reverse without potential meter?
I need help bypassing a Schneider 3 phase Vfd. It’s on a new unit under warranty and Vfd is bad. I need to jump out the L1 L2 L3 to the T1 T2 T3- any help?
Can u pls explain configuration - VFD is not taking speed command even after configuration of AI & automatically running on full speed without speed reference command .
thank you for everything, you are a great help to me, I have never used this product, I ask you a favor: I need to connect a fountain pump to the atv320, can you help me with the electrical connections and configuration of the atv320. I put a start button, a stop button and a potentiometer to increase or decrease the speed. thank you very much
Hi There. Glad you like the videos. Do you already have this unit as Schneider drives are not the easiest to set up. Have you watched the other 2 videos?
Hi There. Yes you can have Jog button. Assigned it to one of the free DI. On weekend I have last part of the drive video coming out, were i will talk more about how that works.
Such a shame that English isn't understandable for everyone. Make proper, well pronounced verbs please. Anyway, thanks for explanation although it might be better to subtitle.
Thank you, this is a great explanation.
This drive uses a very elaborate and sometimes illogical way to set it up, and the programming manual is huge. The digital manual is stylized which makes searching for settings impossible.
I finally set it up via simple motor run, Conf > Full > Sin- i believe.
I'm Dutch and sometimes your English is a bit hard to follow, but you always make very useful videos, i loved that you showed your control button set up, Thank you again
Hello Fellow colleagues. If you enjoy the video please click that like button and if you did not, dislike it and let us know in comments, what was, that made you not happy with the content, so I can learn from it and make better videos for you in the future. Have a great day everyone.
please can I get your email address? By the way, can this VFD drive a motor coupled with a gear system? Actually, It's a conveyor system.
Hi I've program a drive to run forward and reverse using a potential meter, can you advise me on how program a drive to run forward using potential meter and run in reverse without potential meter?
What about the having the motor run with just the start and stop button (3 wire)?
I set it up exactly like you, but I can't seem to make it start.
Actually, it does what it's supposed to, but starts at 0hz and doesn't go up.
Have I missed something?
I need help bypassing a Schneider 3 phase Vfd. It’s on a new unit under warranty and Vfd is bad. I need to jump out the L1 L2 L3 to the T1 T2 T3- any help?
What can I do to resolve NLP on the display of my ATV320 drive?
Why my VFD is displaying nLP? checked input Voltage and its showing 415V. and bus voltage is 345V. but its not running .
Atv320 power outage as emergency stop? Page 232 in the manual
can i use to motor with DC brake?
where can i get one of those remote controller at you are using
They were build by me until it got to expensive.
Can u pls explain configuration - VFD is not taking speed command even after configuration of AI & automatically running on full speed without speed reference command .
It looks like potentiomater is closed. i.e there could be lot of problems that could cause that. It is hard to pin point exactly.
Thanks for good videos.
About the emergency stop, is there any function assigned to it.
So it´ll say stop on the display?
Hi There. Depending on your parameter set up. Some will some not.
@@IGSElectronics the emergency stop is in series with the stop button
thank you for everything, you are a great help to me, I have never used this product, I ask you a favor: I need to connect a fountain pump to the atv320, can you help me with the electrical connections and configuration of the atv320. I put a start button, a stop button and a potentiometer to increase or decrease the speed. thank you very much
Hi There. Glad you like the videos. Do you already have this unit as Schneider drives are not the easiest to set up. Have you watched the other 2 videos?
Can I have a 3 wire control with a jog button?
Hi There. Yes you can have Jog button. Assigned it to one of the free DI. On weekend I have last part of the drive video coming out, were i will talk more about how that works.
@@IGSElectronics thanks a lot
How to run motor with jog of drive..
@@RaviSharma-xi4ly as far as am aware that option is not available for this drive.
@@IGSElectronics okay good very good
Such a shame that English isn't understandable for everyone. Make proper, well pronounced verbs please.
Anyway, thanks for explanation although it might be better to subtitle.
Agree with you. Almost like trying to understand Nigeria English. Too bad for such a good video