Spoiler Installation on 4th Generation 4Runner 2009 SR5 4WD Part 1
HTML-код
- Опубликовано: 28 сен 2024
- Spoiler: amzn.to/37lIYFa
Tools used: Lots of PATIENCE
Spoiler from Amazon using 2 bolts for the top holes, guide lines, and simple instructions
Drill and drill bits: amzn.to/34SU0Bs
Flat head screw driver to Remove factory 3rd light: amzn.to/3n4gExa
Phillips screw driver: amzn.to/2WWOedu
Blue masking tape : amzn.to/3mX1Pwi
Carpenter masking tape : amzn.to/38Nw6Iy
Electrical tape: amzn.to/3hpnjkd
3M double sided tape : amzn.to/3pxEB1s
Scissors: amzn.to/3o08M0D
Electrical fliers: amzn.to/3rBiQ2s
Isopropyl alcohol : amzn.to/3pvlTaE
Automotive towel: amzn.to/3py6aYp
Thanks to your video I was able to find where the connecting wires were and fixed my problem loose wire.
No problem, I'm glad I was able to help
Facts me too thankyou 😂💯💯
It would pain me to have to drill into my rig! thinking of a spoiler but really dont wanna drill////
It wasn't that hard
@@autostationfanatic more so of having to commit to the spoiler for the rest of the vehicles life otherwise rain will get in or it will look bad
to be on the safe side, couldn't you just drill the mounting holes from the inside out? Meaning removing the rubber plugs from the inside and drill right in the middle of that hole? Seems like drilling from the top to match the hole underneath would be much harder and have more room for error.
That's an idea as well. But it would be hard to exactly mark it on where to drill the hole. It was not drilled center from where the rubber hole is located.
@@autostationfanatic ok thanks that explains drilling from the top makes more sense then.
What are the # screws on the spoiler? Thanks
I cannot remember
I’m not a DIYER. How much do u think a shop would charge me for this
I believe it all depends where you go. A dealership will cost more
Great video, I’ll be adding this to my to do list
Great, let me know if you have questions.
Here's the link if you haven't done it yet.
amzn.to/37lIYFa
Looks like this is out of stock as per the Amazon link you posted. Any thoughts on other sources?
Spoilersource.com
I see that, I've seen them on ebay as well.
Assume same process for 2005 4runner?
Yes, it should, be if it didn't have a spoiler
🙌🏻thanks men
No problem 👍
I went to body shop and paid them to install it. Love the way it finishes off the 4Runner look.
how much did it cost for install?
@@jackhibbitts3870 …It depends on body shop prices for labor. I paid $180 including tax, they did an amazing job. I go through car wash and have never had an issue.
I saw in another video there was clips that held the bottom corner on both sides, did you have them add something like that?
@@gavinkillzemgaming2012 …clips and an epoxy glue that will need to cure for about 24 hours. The glue is the key.