Available from affiliate links: Tecware Evolution VXN EVO Amazon Local: amzn.to/3xZXxzr (Black version) Amazon UK white version amzn.to/3y1aVTV Amazon UK black version amzn.to/3xZ3Ymh Ebay UK: ebay.us/Bpcu8u Ebay US: ebay.us/VH935s Ebay CA: ebay.us/2dBSGP Ebay AUS: ebay.us/pmIFVz
Thanks Mike for the honest review. If it didn't have those fans and cost less, I think it might be a better case to build in? To me it looks like the slots are the same size as the non-open slots. If it had the octagon holes it would breathe better? The perfect case is the one that fits your needs. Thanks for sharing Mike and lady Kath. Take care all. Cheers
@@mikesunboxing I agree Mike. That case isn't bad if you plan your build in it accordingly. I'd get one if thy were available in the states. Cheers bud
About the part you mention about those fans being DC and you can't control the fan speed, well apparently with my gigabyte motherboard I can control fan speeds no matter if is PWM or DC.
Could you fit a 15cm graphics card into this? Because this case doesnt have vertical gpu mount and the power cable seems already have reached outside of the glass panel
When I assembled my sister's PC earlier, she had this case I suggested she get, since it supposedly have better airflow than my Aigo Darkflash C305 based on the bigger ventilation holes & so on (and actually being cheaper by about $10, on top of getting 3 free fans which my C305 doesn't have, probably offset with mine being a slightly larger ATX case + actually having rubber grommet cable inlets/outlets). Now, I thought all PCIE slots on casings & motherboard specifications are all uniform to each their form factors. Surprisingly, when I put things together in the VXN, the 1st PCIE slot on this doesn't line up to the GPU? I took out the top most slot's cover only to find it doesn't line up with it by an entire slot's height, and had to take out the 2nd slot for things to line up properly, leaving the 1st slot all removed & ugly. Granted, there are aftermarket covers, but still. It's only my 2nd time building PCs from scratch. Is this normal? Its a 5600X with an Asus TUF B550M-Plus & a 4060 btw. My other concern is that despite the rich GPU clearance in length, I do find there is very little room vertically? I put 3 intake fans on the bottom, and theres like only 25mm of space between the GPU & the bottom intake fans and thats with a relatively small 4060 no less. I imagine it'd not fit had it been any one of those thicker GPUs. On the plus side though, the GPU runs very cool being almost directly above the bottom intake fans lol. On the other, I wonder if that actually messes with case/CPU temp? She only had the stock cooler on it atm since unfortunately the aftermarket tower cooler she got came with the mount broken on arrival. CPU temp reaches up to 48C on idle & up to 79C (and sometimes up to 82C rarely) on full load. Is this normal with the Wraith Stealth?
Interesting design on face of it, show case your Matx build! Agree they should offer case only so you can put better fans in there. I.O. is limited too. My critique of these case designs is they expect air to do various sharp 90degree turns which must lower airflow efficiency and increase noise. But then its a budget show case! Thanks for reviewing Mike and Kath 🐈👍
the front or the side? the smaller front glass panel has a retaining screw in the back to release it. the larger panel has a screw at the top and the pull tab
Overclockers seem to buy them and review them I guess he’s got plenty of dough. And I see kitguru reviewing them also! I guess they both have money to burn 🔥
Too many trying to copy Lian Li and not getting the quality, I know it costs less, but why bother if your not getting it right? No rubber grommets for the cable inlets/outlets, also looks cheap.. I have 10 fans in my case and that is noisier than mine.. I put magnetic filters on my o11 evo intakes.. Always tell the truth as you have, Thanks Mike & Kath..
Available from affiliate links:
Tecware Evolution VXN EVO
Amazon Local: amzn.to/3xZXxzr (Black version)
Amazon UK white version amzn.to/3y1aVTV
Amazon UK black version amzn.to/3xZ3Ymh
Ebay UK: ebay.us/Bpcu8u
Ebay US: ebay.us/VH935s
Ebay CA: ebay.us/2dBSGP
Ebay AUS: ebay.us/pmIFVz
Thanks Mike for the honest review. If it didn't have those fans and cost less, I think it might be a better case to build in? To me it looks like the slots are the same size as the non-open slots. If it had the octagon holes it would breathe better? The perfect case is the one that fits your needs. Thanks for sharing Mike and lady Kath. Take care all. Cheers
the search for the perfect budget case contiues.
@@mikesunboxing I agree Mike. That case isn't bad if you plan your build in it accordingly. I'd get one if thy were available in the states. Cheers bud
Do you recommend getting magnet air filters for the side panel intake?
I have already bought my last case Mike a Fractal Design Define 7 beautiful white case with all the bells 🔔 and whistles! Bought it for $125 pounds!
Sounds great!
About the part you mention about those fans being DC and you can't control the fan speed, well apparently with my gigabyte motherboard I can control fan speeds no matter if is PWM or DC.
you still can't control these as there is no way to connect them to the motherboard.
Could you fit a 15cm graphics card into this? Because this case doesnt have vertical gpu mount and the power cable seems already have reached outside of the glass panel
yes it can take up to a 160mm cpu cooler so there should be a bit of wiggle room there, it might be worth looking at 90 degree power adpaters also
When I assembled my sister's PC earlier, she had this case I suggested she get, since it supposedly have better airflow than my Aigo Darkflash C305 based on the bigger ventilation holes & so on (and actually being cheaper by about $10, on top of getting 3 free fans which my C305 doesn't have, probably offset with mine being a slightly larger ATX case + actually having rubber grommet cable inlets/outlets).
Now, I thought all PCIE slots on casings & motherboard specifications are all uniform to each their form factors. Surprisingly, when I put things together in the VXN, the 1st PCIE slot on this doesn't line up to the GPU? I took out the top most slot's cover only to find it doesn't line up with it by an entire slot's height, and had to take out the 2nd slot for things to line up properly, leaving the 1st slot all removed & ugly. Granted, there are aftermarket covers, but still. It's only my 2nd time building PCs from scratch. Is this normal? Its a 5600X with an Asus TUF B550M-Plus & a 4060 btw.
My other concern is that despite the rich GPU clearance in length, I do find there is very little room vertically? I put 3 intake fans on the bottom, and theres like only 25mm of space between the GPU & the bottom intake fans and thats with a relatively small 4060 no less. I imagine it'd not fit had it been any one of those thicker GPUs. On the plus side though, the GPU runs very cool being almost directly above the bottom intake fans lol.
On the other, I wonder if that actually messes with case/CPU temp? She only had the stock cooler on it atm since unfortunately the aftermarket tower cooler she got came with the mount broken on arrival. CPU temp reaches up to 48C on idle & up to 79C (and sometimes up to 82C rarely) on full load. Is this normal with the Wraith Stealth?
temps sound about right for a amd stock cooler
Interesting design on face of it, show case your Matx build! Agree they should offer case only so you can put better fans in there. I.O. is limited too. My critique of these case designs is they expect air to do various sharp 90degree turns which must lower airflow efficiency and increase noise. But then its a budget show case! Thanks for reviewing Mike and Kath 🐈👍
yeah it is getting to the point where it is form over function, and that seems to drive sales. But harms efficiency and progress in design
Mike, please help. I’ve been trying for the past hour to get the front panel off by pulling the latch as hard as I could but it will just not budge.
the front or the side? the smaller front glass panel has a retaining screw in the back to release it. the larger panel has a screw at the top and the pull tab
@@mikesunboxing I’ve been trying to open it from the front and there is no screw on the top
@@mikesunboxing do you have discord? Could you send me images of the screw?
@@mikesunboxing I’ve been trying to open it through the large panel*
@mikesunboxing I am having the same issue too, could you please help?
*VXN'S rgb fans are not syncing. they always in rainbow color.. how to fix it with fusion 2.0?*
press and hold the rgb button on the case to transfer the signal from the motherboard
@@mikesunboxing *dang man, it worked! spent couple of days figuring it out. lol. thanks*
@@miyaw9360 Glad you got it sorted out 🙂
Perfect for a retro build 😀
i have been testing with a 7700 and rx6800 that is almost retro in the fast paced world
the major red flag i encounter is : no mesh for the psu fan, which is pretty important for long term usage
what vertical mount for the gpu is available for the case?
they have their own version on the website but not sure if it is compatible sorry
*does RGB lights can be turned off?*
yes they can
So Mike why won’t you review fractal design cases anymore I see you did once long ago why not now?
they wont send them, and they are too expensive to buy over here
Overclockers seem to buy them and review them I guess he’s got plenty of dough. And I see kitguru reviewing them also! I guess they both have money to burn 🔥
they have sponsored sections, that must help with that
Interesting. Tecware managed to make a Lian Li clone look more like a hamster cage. 😂
Case companies like tecwhere should create their own ideas 💡 rather than copy other designs from other companies.
There are so many similar cases, Lian Li must be asking itself, "Why can't they design their own cases?" :-)
copying is a form of flattery
Too many trying to copy Lian Li and not getting the quality, I know it costs less, but why bother if your not getting it right?
No rubber grommets for the cable inlets/outlets, also looks cheap..
I have 10 fans in my case and that is noisier than mine..
I put magnetic filters on my o11 evo intakes..
Always tell the truth as you have, Thanks Mike & Kath..
If we don't have the truth what do we have. I would rather be trusted than wealthy
Very true, one of the reasons I love your channel..
The only one I subscribe to.
@@Vialli100. we are very happy to hear that thank you 🙏
Never been a fan of fish tank cases to be fair
Perez Gary Gonzalez Susan Davis Susan
The ionz versions better