First you order a co2 kit from motion raceworks or carter motorsports. Those are the two companies I know of. As far as wiring, if you have the same ecm as me. Its very simple. You need to figure out which two outputs you want to use and run one to each mac valve. Then you set it up in the software.
@@MrJoshjackson01 go to msextra.com that's were all the software and instructions are. It's simple man, trust me, if I can figure it out anyone can. Also join the ms3pro drag race group on Facebook. They usually drop beta software in there. That's how I got the boost builder software. Before it was released.
can you show me where you do the test from which you can't see from the video
Can you walk me through the parts needed and how to wire the C02 and boost controller setup please
First you order a co2 kit from motion raceworks or carter motorsports. Those are the two companies I know of. As far as wiring, if you have the same ecm as me. Its very simple. You need to figure out which two outputs you want to use and run one to each mac valve. Then you set it up in the software.
@@legacyperformance9982 I'm running the EFI gold box.
@@jeffsellsdenver yeah should be straight-forward then.
Do you have a video of how set it up if the gold box? I'm switching to gold box and wanna keep the co2
I don't think the box matters as long as you have the latest software. It should be the same.
@@legacyperformance9982 you think you could guide me through on how to set it up on the software?
@@MrJoshjackson01 go to msextra.com that's were all the software and instructions are. It's simple man, trust me, if I can figure it out anyone can. Also join the ms3pro drag race group on Facebook. They usually drop beta software in there. That's how I got the boost builder software. Before it was released.
@@legacyperformance9982 awesome brother! Thank you so much.
Trying to setup my boost control using dual MAC noids also. What frequency and duty cycle are you using to cycle them? Thanks!
Shoot me a text and I'll send you screenshots this evening. 704-754-6473
@@legacyperformance9982 I am curious of DC and the freq as well. Nice information and good instructions. 7lbs -14lbs. Very cool
Hey bud I have ? I installed co2 and didn’t know how often to Mac valve should be on and how long it takes to fill waste gate
Hi, can you make a video where you can clearly see what you activate on the PC and what settings you use because you can't see the video clearly
@AntonioConiglio-y6j if people would subscribe to my channel so I could monetize I'd make all kinds of videos.
are you using co2 yes or no? Please confirm.
Yes, two Mac valves one fills and one release CO2 basically floating the valve. Originally I used one Mac and used manifold pressure.
I want lose 4 seconds in the ⅛th 😂
Lol