2015-2023 Mustang Air Lift Performance Air Suspension Kit 3P Complete Installation

Поделиться
HTML-код
  • Опубликовано: 31 июл 2024
  • Bill shows you how to install an Air Lift Performance Complete 3P Air Suspension Kit on your 2015-2023 Mustang.
    Purchase Product Here:
    www.cjponyparts.com/air-lift-...
    The Air Lift Performance Complete 3P Air Suspension Kit provides you with everything you need to install a new air suspension system in your 2015-2023 Mustang. This air suspension allows you to drive at a raised height for comfortable driving, and then air out the bags at competitions and car shows for a lowered stance. The 3P controller allows you to have 5 different preset heights at your fingertips and for on the fly height control.
    Check out more Mustang Suspension parts from CJ's here:
    www.cjponyparts.com/mustang-su...
    Check out more Air Lift Performance parts from CJ's here:
    www.cjponyparts.com/air-lift-p...
    Subscribe to CJ Pony Parts on RUclips here:
    ruclips.net/user/subscription_c...
  • Авто/МотоАвто/Мото

Комментарии • 88

  • @ragnarlothbrok6240
    @ragnarlothbrok6240 10 часов назад

    GREAT quality video! No bs, no blathering...straight to the content that we clicked for.

  • @TheLightningSt0rm
    @TheLightningSt0rm 4 года назад +30

    For those of you having trouble with the rear nut plate. Attach it to the bag instead of putting in the hole and you can wiggle it in then tighten.

    • @thevishen1950
      @thevishen1950 Год назад

      Did you put bump stop when installing the rear shock?

  • @zeldacuz
    @zeldacuz 7 лет назад +36

    Can we have that second part of the video where you drive it?

  • @KK-yx6ic
    @KK-yx6ic 3 года назад +1

    Very nice video. I wasn't afraid of the install, but this video helps a lot and gives me the confidence to get it done at home.

  • @RobertKohut
    @RobertKohut 7 лет назад +3

    Pretty straight forward install. Looks like a top notch kit. Can't wait for the follow up video. I would do all the mechanical stuff one day and do the lines and wire the next. I think in a single day I might be a bit tired after all the suspension stuff and not be fresh and patient for the lines and wire and probably mess stuff up or be sloppy. We are not all pros like you....LOL...LOL

  • @LEVONLEWIS1
    @LEVONLEWIS1 7 лет назад +4

    Nice watch Bill, got to have it 👍

  • @KINGKJ2REAL
    @KINGKJ2REAL 5 лет назад

    Thanks for the video helped me install my system

  • @ejhanlassiter
    @ejhanlassiter 7 лет назад

    wow... it looks amazing...... nicely done

  • @zacharycabural4814
    @zacharycabural4814 7 лет назад +35

    Can I have a request. Can you make a video how to install the wiring harness. thank you

  • @amalfi460
    @amalfi460 6 лет назад

    Bill could you make a video showing where and what size of alternate air tank to use and locate in spare tire well

  • @gverhoeff39
    @gverhoeff39 5 лет назад +1

    Great job bill ! You ever have a moment of oops doing a video ? Or better yet a bloopers video ?

  • @JuanFlores-ee4fv
    @JuanFlores-ee4fv 4 года назад +1

    What’s the widest size of tire I can go for a 2018 mustang in order for me to air out perfectly fine ?

  • @johnb415
    @johnb415 5 лет назад

    this is by far the best and most useful descriptive video on an airlift installation. thank you for this! i did have a noob question. my shop which is quite far away installed my 3H system. Recently my manifold air pressure sensor went bad and airlift just sent me a new manifold. i'm going to attempt replacement of the manifold myself. i saw how you plug in the air hoses and how they lock in. as for the harness plugging in, that looks pretty straight forward too. obviously i should drain the tank before i start this install. but my question is, do i need to disconnect the red and black terminals of the battery first before removing my old manifold and plugging the new one in, or is it safe to leave the battery connected and just swapping it out? i ask because last time disconnection of the battery erupted some issues while installing a subwoofer and amp. i have an audi s5

  • @diehardch1ef822
    @diehardch1ef822 6 лет назад

    Recommendation for the focus rs? The stiff ride is a killer. Would like more damping adjustment and a smoother ride. Daily only no track use.

  • @TheJayrod97
    @TheJayrod97 2 года назад

    One thing i miss about owning a mustang are these awesome detailed installation videos you put out

  • @gurjitgill1751
    @gurjitgill1751 5 лет назад

    How would you loosen the rear bag and take out if there was a problem considering that the nut plate is on the inside.

  • @bassplayerham777
    @bassplayerham777 5 лет назад

    My controller keeps on turning off after a couple of seconds after powered on or doesn’t even power on sometimes. I never screwed down the relay could that be the issue?

  • @aarontong8713
    @aarontong8713 4 года назад +1

    Anyone know where I can find a kit for my older Sienna 2009?

  • @shawnthibodeaux
    @shawnthibodeaux 5 лет назад

    I was thinking of making my old mustang a mud toy can you help me out? Is there any aftermarket parts for that

  • @Unique1Media
    @Unique1Media 3 года назад +1

    Top 2 i pick towards lowered cars w "some" permormance?
    B2 Racing COILOVERS w air cup to raise car w a flick of switch for bunps
    or
    Air Lift Perfornce

  • @suspensefulness
    @suspensefulness 4 месяца назад

    what size tires should i go with ,running stock 19 black mustang wheels

  • @poohwecampbell7799
    @poohwecampbell7799 5 лет назад

    I have a question: what do I have to buy from your site to get the aggressive Fitment of (10x5 front and 10x5 rear) on my 2016 S550??? I see a lot of people have Air-lift suspension do I need that first?? Please help

  • @jerrybarroga2611
    @jerrybarroga2611 6 лет назад +11

    The best ever air suspension installation i’ve seen in youtube. Very much detailed and specific.
    Keep it up AirLift!
    Hope you can make another detailed video using a Honda Accord Gen 8.

    • @KINGKJ2REAL
      @KINGKJ2REAL 5 лет назад +4

      Jerry Barroga oh just fuck CJ then huh ?

    • @mylesanderson5864
      @mylesanderson5864 5 лет назад +1

      I’d say thanks to bill for doing the video man

  • @ulisesh2727
    @ulisesh2727 2 года назад

    I have a 2020 Mustang GT PP1, can I buy this complete kit? And does it include everything I need to get it installed professionally?

  • @KhanversationsOfficial
    @KhanversationsOfficial 7 лет назад +3

    Love watching this guy work. Awesome personality and presentation skills shine right through each video. ~}[]{

  • @TJShoop
    @TJShoop 5 лет назад

    Link for that cordless impact wrench?

  • @gurjitgill1751
    @gurjitgill1751 5 лет назад +1

    How do u even hold the nut plate in place.

  • @smokezyy8736
    @smokezyy8736 9 месяцев назад

    Heyy which line was installed on this? Was it the 1/4 or 3/8?

  • @GOJIRA561
    @GOJIRA561 4 года назад

    Hey CJ what’s the dimensions of that board for the Air tank?

  • @eagancolonetti6531
    @eagancolonetti6531 Месяц назад

    Been thinking about bagging my mustang. Problem is I have a 2020 PP2 with the magneride suspension. From what I’ve seen it looks like you can’t or at least shouldn’t install air ride on a mustang with magneride. Anyone has any thoughts on that?

  • @josiahdujay1443
    @josiahdujay1443 Год назад

    How did you hold the plate when installing the rear? I’ve been trying for 3 hours now and it’s stressing me out :’(

  • @bradtorda4519
    @bradtorda4519 4 года назад

    Can you make one for 2017 Honda Civic si.!!!! Please

  • @61484
    @61484 7 лет назад

    Do a 99-04 Mustang GT header install 4.6 engine

  • @ryesagainstthemachine2995
    @ryesagainstthemachine2995 2 года назад

    You said it will kill your battery. Can you start the car then calibrate?

  • @americankiwi
    @americankiwi 4 года назад

    You could weld the plate in the rear so it does not spin

  • @tencentforce6359
    @tencentforce6359 2 года назад

    How much clearance get added to the car

  • @gearedupproduction8290
    @gearedupproduction8290 3 года назад

    Is all this sold separately?

  • @marksill8020
    @marksill8020 7 лет назад

    hey Bill, I've been watching your vids for over a year. just out of curiosity, I'm wondering which is better. A coiled over system or a bagged system. I'm not going to show my car, or go to the track. I'm just wanting a more comfortable ride with an improvement on handling. Which would you recommend?

    • @Zerogivengarage
      @Zerogivengarage 7 лет назад +1

      Honestly shocks, struts, and new springs would probably be all you need. Both coilovers and air have a lot of adjustment you can dial in for your use, if you are just looking for a better ride both might be overkill.

  • @alexsi4019
    @alexsi4019 5 лет назад +2

    I’m about to install a 3P on my 2013 Honda Civic. Wish me luck

  • @pace1786
    @pace1786 4 года назад +7

    17:33
    Deez nuts

  • @ryesagainstthemachine2995
    @ryesagainstthemachine2995 2 года назад

    Are you worried about air fill to front versus rear with the front air lines significantly longer than your rear air lines. I would assume you'd want all air lines approximately the same length and simply roll up and zip tie access rear line and hide in the wheel well to get all 4 wheels to lower and raise at the same level evenly?

    • @benadams8525
      @benadams8525 2 года назад +1

      Not sure why the rear airing out (or filling) faster than the front is an issue other than aesthetics? That said, if it's important there are other ways to do it without running a bunch of unnecessary line. One being an air flow control valve.

  • @pjmiravalle
    @pjmiravalle 6 лет назад +4

    Bill how did you install the rear spring perch plate? I tried sticking in a flathead screwdriver to hold it in place, but I run out of clearance after a certain point and can't torque it down all the way.

    • @steve_shec
      @steve_shec 6 лет назад

      Patrick Miravalle what did you end up doing? Im stuck on that right now

    • @therealsoupbruh
      @therealsoupbruh 5 лет назад

      @@steve_shec whatd you do? only reason why i havent order bags yet is because i do not understand one bit of that part of the install. very vague.

    • @TheLightningSt0rm
      @TheLightningSt0rm 4 года назад

      I’m stuck on this right now too

  • @bassplayerham777
    @bassplayerham777 5 лет назад

    Alright got a problem after a couple of months something was rattling and sounded loose i am just checking and its the lower centering spacers from the bag tried to tighten and just was spinning freely so i removed it and it came out with the gold thread that holds it in place... anything i can do?

    • @cjponyparts
      @cjponyparts  5 лет назад

      Give airlifts support line a call they can probably help you out (800) 248-0892

  • @rcobsesssed
    @rcobsesssed 7 лет назад

    Noob question: wouldn't tire wear be a big issue with constantly changing ride height typically used with air suspension?

    • @Zerogivengarage
      @Zerogivengarage 7 лет назад +2

      You would get the car aligned at your normal driving height so it really isn't an issue.

  • @RobertKohut
    @RobertKohut 7 лет назад

    Just headed over to watch the "05 to '14 install......

  • @itsthetruepunisher
    @itsthetruepunisher 5 лет назад

    Where is the second video???

  • @thejhp1
    @thejhp1 7 лет назад

    I was never given any hardware. Can you guys let me know the size of the bolt for the air tanks?

  • @xxxmikeyjock
    @xxxmikeyjock 4 года назад

    can we buy partial bits of this kit. I am swapping a mustang irs in to a truck so dont need a lot of the brackets

    • @cjponyparts
      @cjponyparts  4 года назад

      We only offer the complete kits, if you contact Air Lift direct they may be able to help

  • @sergiocontreras8930
    @sergiocontreras8930 Год назад

    Hey Bill I have a question when you remove the back spring did you remove the bottom rubber piece or reuse it I haven't seen nobody mentioned it yet no even the installation instructions

    • @Ecosystemgarage
      @Ecosystemgarage 6 месяцев назад

      Remove both rubber pieces not used anymore

  • @billybobb2650
    @billybobb2650 6 лет назад

    Bill I have 2014 CAMARO zl1 AND WANT TO INCREASE THE RIDE HEIGHT, ROAD CLEARANCE BY 2 TO 3 INCHES...CAN YOU PROVIDE ME WITH SUGGESTIONS AS TO THE BEST WAY TO ACCOMPLISH THIS

    • @cjponyparts
      @cjponyparts  6 лет назад

      Sorry I really don't have any experience with those cars.

    • @tyler_fraser
      @tyler_fraser 5 лет назад +1

      Billy Bobb buy a truck lol

  • @ubcnme1
    @ubcnme1 5 лет назад

    What brand electric impact gun is that it's pretty powerful...

  • @ericpugh247
    @ericpugh247 6 лет назад

    Please tell me what wheels these are. This is my color and I want to buy those wheels right now!!!!!!!please help

    • @cjponyparts
      @cjponyparts  6 лет назад +1

      I know they are made by Stance but we don't sell them so that is all I know. - Bill

  • @edwardmyers1746
    @edwardmyers1746 6 лет назад +2

    And a well stocked tool box lol also why them running lights on? 😂

  • @hgrrdgz619
    @hgrrdgz619 2 года назад

    Those shocks are 4 v6 and v8

  • @juliansaiz5714
    @juliansaiz5714 3 года назад

    8:39 nice watch

  • @Airllen-Ada
    @Airllen-Ada 4 месяца назад

    🤩🤩🤩🤩

  • @thecapnpoopy
    @thecapnpoopy Год назад

    Where is the driving review?

  • @coreyjohnson993
    @coreyjohnson993 5 лет назад

    I 2^x the request for the second part. I am looking for something to tame a non-magna pony.

  • @stankdaddy9813
    @stankdaddy9813 6 лет назад +1

    As awesome as these videos are, they're not as informative as i would have hoped. For example where did you mount the compressor?? You show us the tank and manifold but completely neglect the compressor.

    • @Zerogivengarage
      @Zerogivengarage 6 лет назад +3

      I try and show as much of the details as I can, we focus more on how everything works since mounting location is subjective.

  • @prathamnanda8563
    @prathamnanda8563 6 лет назад +1

    What's the highest it will go

    • @kimaniharris7922
      @kimaniharris7922 6 лет назад +1

      Pratham Nanda I think they said 1/2 inch above stock

  • @Hellhorde.
    @Hellhorde. 3 года назад

    17:29 17:33

  • @halo3ownd
    @halo3ownd 7 лет назад

    Never heard hard parker lol, only heard slammed and ricer

  • @TheRoughneck80
    @TheRoughneck80 4 года назад

    Yeah lets drop 100k into a MUSTANG

  • @wickedcut
    @wickedcut 5 лет назад

    Added weight.. nope

    • @donovanmcmanus7029
      @donovanmcmanus7029 2 года назад

      can you install this on a car with magnaride? have a kit for my 2015 but getting a 2021 built which will have magnaride. Will this trip sensors and cause errors? I know I can get magnaride lowering springs but looking to be able raise and lower for my driveway access.