Hey guys! Don’t forget to comment down below and let me know what you think of the mug but also comment what DIYs you want to see on the channel!! Let’s be interactive! ♥️
Thank you! The glue dries rather quickly as you’re applying the rhinestones so I like to move quick. Though it does take like a few hours for it completely set and dry.
Hello all well ? I'm already subscribed to your youtube channel. a hug from Brazil! I really liked the video. I read that the E6000 is not suitable for vinyl, what do you say? Have you done any tests with your arts? Can you put hot liquids quietly? Can you wash it with soap and water without damaging the jewelry? please answer me, i am unemployed and i need an income. A thousand Kisses.
Hi! Thanks so much for watching my video but thanks a trillion for being a subscriber. Truly appreciate you! Now as far as the e6000 goes….to be honest it’s really touchy and go and here’s why. If you’re delicate with the amount you’re using to apply rhinestones, E6000 is perfect and it doesn’t make the rhinestones cloudy and they adhere very well and the mug will be able to be hand washed with water and soap. I haven’t seen any issues with using e6000 on vinyl. I have had mugs done with e6000 from 3 years ago and not seen anything wrong with the rhinestones. Now I do know there are a few other fan favorites as far as glue goes but e6000 is my tried and true right now. I highly suggest testing out different glues if you want to make a business out of this. And as always much success to you 💛
I did not seal this particular cup with epoxy. Bc it’s a mug, you probably don’t want to epoxy this. But this mug can be washed. Hand washed only; not dishwasher safe.
What was the other adhesive you would recommend. I don't like how the E600 kind of eats through the rhinestones and changes the way they look. They look to have a crackle affect to me.
Kendra Oquendo I’ve also used liquid fusion and have liked how it’s turned out. Here’s a link of where I purchase juggztumblers.com/collections/frontpage/products/liquid-fusion
Does it give the same crackle affect to the rhinestones? I noticed the glass stones work better with the E6000. They done affect the look of the stones.
Hey guys! Don’t forget to comment down below and let me know what you think of the mug but also comment what DIYs you want to see on the channel!! Let’s be interactive! ♥️
Hello what size decal u use
Hi! How do you prevent that flatbacks don't fall? Do you seal it?
@@glendaleeperez no sealing. I’ve uploaded a new video showing the process again. Check it out.
Yes please please make a video makings the decals from the beginning I want to learn how to do it
I’ve uploaded a new video showing the process. Check it out. 💛
Nice! Looks great!
Great work, great delivery
It turned out beautiful
VERY INTERESTING. Just got interested in this craft.
I know in the last months you’ve gotten even better. Keep at it. I’ve uploaded a new video. Check it out. 💛
Your work is awesome. Where do you get the stickers from
I need that pen thingy! This turned out so pretty
Great Job!
Where did you get the decal design from. Yes im veryvery new and excited
Did you ever make the video on how to create the image in design space, what were the dimensions that you used?
how long does it take to dry... great job
Thank you! The glue dries rather quickly as you’re applying the rhinestones so I like to move quick. Though it does take like a few hours for it completely set and dry.
I love this so much You make it look so easy
Karen Stevenson thank you! Once you start, you’ll see how easygoing the whole thing is. The hardest is picking up the rhinestones lol! You got it!!
I love it! Gonna try it tomorrow. Would love to see how to upload SVG’s onto cricut.
I’ve uploaded a new video showing the process. Check it out. 💛
Hi! I’ve been looking for the tutorial on how to upload but can’t find it
I’m gonna to try to bling my mug but I wonder when time comes to wash the cups do they fall off? If so how to prevent n what to do?
I love it
Love it ❤️
Yes
I WOULD LOVE TO SEE FROM BEGINNING TO THE END OF THE STENCILING 😅
GREAT JOB! I enjoyed watching and would love a video on design, tfs
I’ve uploaded a new video showing the process. Check it out. 💛
@@ChiaraDIYWhat ok, thank you
Would love to see how you cut out the vinyl on the circuit
I’ve uploaded a new video showing the process. Check it out. 💛
Where did you get the sticker itself and what are they called
Nice mug. I dont like how the E6000 eats thru the backing of rhinestones from Michaels and Joanns. They change to a bubbly round look inside.
Yes I have heard that! I use a small business to buy my rhinestones and don’t have a problem with e6000 eating through them.
Thanks for the video Queen. Do you ever do any crafts with glitter glue?
Thank you for watching. I’ve used them before and found them to be very messy and don’t look good after it dries.
We’re did you get the decal from
I got it from google.
I’ve uploaded a new video showing the process. Check it out. 💛
Can I see how you do the decals please I am just learning
I’ve uploaded a new video showing the process. Check it out. 💛
Hi can you make s video from the very beginning please
I’ve uploaded a new video showing the process. Check it out. 💛
Would like to see full process and upload of sag
I’ve uploaded a new video showing the process. Check it out. 💛
Loving it!! Job done very well done. How did you get the face from circuit and how to you get it to adhere to the cup
Thank you! I got the image from google and then used transfer tape. I’m gonna do another video so that you can see the beginning stages.
I’ve uploaded a new video showing the process. Check it out. 💛
Hello all well ? I'm already subscribed to your youtube channel. a hug from Brazil! I really liked the video. I read that the E6000 is not suitable for vinyl, what do you say? Have you done any tests with your arts? Can you put hot liquids quietly? Can you wash it with soap and water without damaging the jewelry? please answer me, i am unemployed and i need an income. A thousand Kisses.
Hi! Thanks so much for watching my video but thanks a trillion for being a subscriber. Truly appreciate you! Now as far as the e6000 goes….to be honest it’s really touchy and go and here’s why. If you’re delicate with the amount you’re using to apply rhinestones, E6000 is perfect and it doesn’t make the rhinestones cloudy and they adhere very well and the mug will be able to be hand washed with water and soap. I haven’t seen any issues with using e6000 on vinyl. I have had mugs done with e6000 from 3 years ago and not seen anything wrong with the rhinestones. Now I do know there are a few other fan favorites as far as glue goes but e6000 is my tried and true right now. I highly suggest testing out different glues if you want to make a business out of this. And as always much success to you 💛
@@ChiaraDIYWhat thaaaaanks! Youre bleessed, my Angel! ❤ come Brazil onde Day ❤
What’s that’s tool ur using to apply the rhinestones?/
It is called a crystal Katana. I’ve uploaded a new video showing the process. Check it out. 💛
I want to see how you make the decal please
I’ve uploaded a new video showing the process. Check it out. 💛
Do you use epoxy to seal the rhinestones after you are finished applying them. Can this mug be wash over and over
I did not seal this particular cup with epoxy. Bc it’s a mug, you probably don’t want to epoxy this. But this mug can be washed. Hand washed only; not dishwasher safe.
What was the other adhesive you would recommend. I don't like how the E600 kind of eats through the rhinestones and changes the way they look. They look to have a crackle affect to me.
Kendra Oquendo I’ve also used liquid fusion and have liked how it’s turned out. Here’s a link of where I purchase
juggztumblers.com/collections/frontpage/products/liquid-fusion
Does it give the same crackle affect to the rhinestones? I noticed the glass stones work better with the E6000. They done affect the look of the stones.
Where do you get the images
Where to buy the beads?
The rhinestones are from Fabcabcases.com
I’ve uploaded a new video showing the process. Check it out. 💛
Did you put glue on the final design After you placed the rhinestones on the mug?
Dee Zyher I’m unsure if you’re asking if I put glue over the rhinestones at the end?
Yes, that’s what I meant
Dee Zyher no only used glue to place the rhinestones. They don’t move once they’re stuck with the E-6000.
When you put words on do you flip them like you do the tshirts
dana shelton no you don’t have to mirror the words with regular vinyl. Only when you are ironing or pressing words using HTV
What’s the decal size?
The size of the decal is 3x2.589
I’ve uploaded a new video showing the process. Check it out. 💛
Can you put something hot in this will the stone fall off
You can put whatever you want in it. The rhinestones are fine as long as you use the proper glue
Could I use gorilla glue or hot glue or e6000
Or the loctite
@@123rororose I would use loctite if accessible. E6000 is sometimes hit or miss and will sometimes make the rhinestones dull.
Okay thank you so much and the stone where did u get them at
So how do you get the decal????
I just used google to search for the image and then uploaded it to my Cricut to cut.
I’ve uploaded a new video showing the process. Check it out. 💛
Where can we make a decal from example of our face
MamaBoss I would take a picture of yourself and upload it to design space and clean it up to be an svg
I’ve uploaded a new video showing the process. Check it out. 💛
Please make video from beginning
I have a new video showing from the beginning. It’ll be up tomorrow. Please subscribe so you’re notified when it’s up. Thank you for watching.
I’ve uploaded a new video showing the process. Check it out. 💛
Do you sell those stickers?
I don’t but I got the image from google and turned it into an svg. You can also get something similar from Etsy
I’ve uploaded a new video showing the process. Check it out. 💛
where did u get the image?
Loyalty 77 I got the image from google and converted it to an svg in design space
I’ve uploaded a new video showing the process. Check it out. 💛
What size is that decal
gucci Reaves the decal is 3x2.589
@@ChiaraDIYWhat thank you
gucci Reaves you’re welcome!
Would love to see how u did the girl ..love your girl
Thanks for watching! I can do that. Do you want to see it on another cup/mug?
I’ve uploaded a new video showing the process. Check it out. 💛