If you're going E85 that pump is too small. You'll need at least a 450lph Pump, Relay mod and PLEASE re-do the plug on the fuel hat to bulkheads. Otherwise it WILL melt eventually and your S14 will catch on fire. Take the advice from an Aussie. Otherwise sick build bro. Good shit
Trust me, if you’re running a bigger pump, upgrade the fuel pump hat, the plastic in the power connector melts and shorts the pump out, happens with the s15 as well as it’s all the same.
Love watching Calvin and you working on cars and all the small commentaries! Makes me laugh every time! Love the video keep up the amazing work! Can't wait to see the completed s14.
That tool is essentially a Bonesaw and vibrates at a very high rpm you can cut aluminum would anything a lot of flooring companies used to cut underneath door jams to undercut under slide wood floor underneath it so it’s no gaps. Actually make sanding ones diamond blades whole bunch of them. Just make sure you move the two don’t let it sit in one spot it’ll burn up the blade
TJ get a magnet phone mount and suction cup it on your windshield in your viewpoint so you can look at the road and your phone at the same time. That’s how I do it when I’m in meetings while Driving from state to state.
FYI - my wife working for Bosch ABS in japan ...... 400Z ABS not due for productions for another 16 months at best...... get your backorders in now LOL
Teeej you gotta get them rear seats reupholstered in red to match the beautiful bride seats. Maybe even use some bride material to keep that center pattern going? 👀
omg your dad, was like not bye, lol. love the channel, been here since you and Calvin were in the Garage, i love every single thing you have done, and you have pushed me to be better at things i am into and make it my life goal to be the best i can be in what i do, Thank you all Much love!!
I really don't understand how the comment section isn't filled with this type of comment. Like i understand holding a camera and talking to it is similar to just talking to someone in the car but with one hand driving ( well that is if your eyes stay on the road and you dont just stare into the lens for multiple seconds on end. ) Or like filming something out of your car, as long as you're not looking at the viewfinder and just pointing the camera in the general direction... yeah ok I was fine when he said " listening in " to the meeting but then showed a clip of him literally holding his phone to his face and looking at the screen way too long while operating a car imo.
The opening footage is DOOOOOPE!!!! Love the retro VHS quality style! Pleeeeeease.........take the rear seat to your magic upholstery shop and have them match it to the Brides in the front!!!!! 🤘🤘🤘🤘 Mickey and Evan found a pretty sweet 11k mile S2000 when they picked up their new giveaway car.....just sayin' 😉
TJ Hunt Awesome Video I think your S14 looks absolutely incredible now that the Front Bumper is officially on and I can't wait to see the 400Z on the channel especially because you're working on a Street Hunter kit
I only use Valvoline and Maguires because of you brother!! They have been so good to you and they are such a great product that I couldn’t think of using anything else.
😂 Valvoline is the same as mobile it’s all just about the money sane with detail shit you just pay for the name as you see you use it because of him that’s why they sponsor him to get people like you
I never comment tips for auto stuff. My Guy. Just leave the straight edge there for straight cuts! The body saw will follow it in most situations best to the company…..Love y’all more than imaginable.
If you're going E85 that pump is too small. You'll need at least a 450lph Pump, Relay mod and PLEASE re-do the plug on the fuel hat to bulkheads. Otherwise it WILL melt eventually and your S14 will catch on fire. Take the advice from an Aussie. Otherwise sick build bro. Good shit
Ran the walbro 460 on my flex fuel s15, was perfect 👌🏻
Will over work and burn it out 🤣
Ran a 255walbro at 450hp no issues. On E85
hyped to see yall working on a kit for the 400z. Excited to see what yall make out of that car.
Stop calling it 400z lmao. It’s just Z
What's a 400z?
@@VeilSideZ32 it’s called a 400z lmao.
@@z33Santi its just Z
👆👆
Haha inbox me right away .👍.
Trust me, if you’re running a bigger pump, upgrade the fuel pump hat, the plastic in the power connector melts and shorts the pump out, happens with the s15 as well as it’s all the same.
I definitely would make the trip to the warehouse . Make it a Cars Hunt & Coffee !
I knew the 400z was the next iteration* for drifting. LETS GOOO
yessss
How much you wanna bet Tj putting that rebuild 2j in it.
Iteration *
@@joshc9846 lol thanks
Same and when it first came out I tagged TJ Hunt in the post and said he should get it
I think the warehouse meet an great/shopping sale would be super cool, I’d definitely try to make it!
Loving the laid back vibes of the vlog. Keep it up teeg!
The s14 is looking so sick love the build can't wait to see it done 🙌🏼 🔥🔥
The 90s edit was fire 🔥🔥🔥 more of that plz🙏🏼
Omg!! That looks amazing in the living room. Sabrina is cool for letting you hang that in the house in the main room. Is is TOTAL ART!!
Love watching Calvin and you working on cars and all the small commentaries! Makes me laugh every time! Love the video keep up the amazing work! Can't wait to see the completed s14.
I can’t stand Calvin
@@alexyoung8983 I can't stand u
@@BioRevolt why thank you it means a lot luv
That tool is essentially a Bonesaw and vibrates at a very high rpm you can cut aluminum would anything a lot of flooring companies used to cut underneath door jams to undercut under slide wood floor underneath it so it’s no gaps. Actually make sanding ones diamond blades whole bunch of them. Just make sure you move the two don’t let it sit in one spot it’ll burn up the blade
TJ get a magnet phone mount and suction cup it on your windshield in your viewpoint so you can look at the road and your phone at the same time.
That’s how I do it when I’m in meetings while Driving from state to state.
A really unpopular opinion I would love to see TJ doing a widebody NSX build.
I couldn't agree more
tj i have an s14 wheel centerpiece with airbag if you need, unless you go with a quick release
FYI - my wife working for Bosch ABS in japan ...... 400Z ABS not due for productions for another 16 months at best...... get your backorders in now LOL
If it was on a weekend, like on a sat. I would for sure come down from LA to get some merch!!
Yes we do
I live about 8 hours away in Monterey county but I’d definitely drive down there for that !!!!
Teeej you gotta get them rear seats reupholstered in red to match the beautiful bride seats. Maybe even use some bride material to keep that center pattern going? 👀
omg your dad, was like not bye, lol. love the channel, been here since you and Calvin were in the Garage, i love every single thing you have done, and you have pushed me to be better at things i am into and make it my life goal to be the best i can be in what i do, Thank you all Much love!!
In-person Huntquarters warehouse day would be SWEET! Yes✔️✔️✔️
Definitely yes will travel from Santa Cruz CA
Let’s gooooo merch is back just copped two hoodies, been waiting on that news for a couple weeks now
Please do the shop experience! Would for sure travel for that!
Hunt & Coffee... I can see it now, celebrating the 25th annual Hunt & Coffee.
every time i see that color. it looks so freakin good. . . they did a fantastic job getting it painted
peace, eturn
I love watching your uploads! I'd like to watch them for many more years.
Please put your phone down when you're driving. Be responsible TJ.
I really don't understand how the comment section isn't filled with this type of comment.
Like i understand holding a camera and talking to it is similar to just talking to someone in the car but with one hand driving ( well that is if your eyes stay on the road and you dont just stare into the lens for multiple seconds on end. ) Or like filming something out of your car, as long as you're not looking at the viewfinder and just pointing the camera in the general direction... yeah ok
I was fine when he said " listening in " to the meeting but then showed a clip of him literally holding his phone to his face and looking at the screen way too long while operating a car imo.
No lie those factor meals are great, they’re fresh. And quick, most of them heat up in 2 minutes and ready to eat.
Glad I stayed till the end today. I scooped up the last finish line sweatshirt! Score!!
The opening footage is DOOOOOPE!!!! Love the retro VHS quality style!
Pleeeeeease.........take the rear seat to your magic upholstery shop and have them match it to the Brides in the front!!!!! 🤘🤘🤘🤘
Mickey and Evan found a pretty sweet 11k mile S2000 when they picked up their new giveaway car.....just sayin' 😉
Yes do it in person sale! I'd love the ride down to San Diego !
TJ, Check out the orange Fairlady 400z at the Tokyo Auto Salon. The front bumper they did is something pretty damn nice.
If i was in the us i would for sure travel to the warehouse for a sale! Keep up the good work sir.💪🏽
Please do the warehouse sale!!! That would be super cool and I would definitely travel for that!!
TJ Hunt Awesome Video I think your S14 looks absolutely incredible now that the Front Bumper is officially on and I can't wait to see the 400Z on the channel especially because you're working on a Street Hunter kit
ALRIGHT you got me Teeg I've been wanting a stack chips buy whips sweatshirt and finally ordered one
I would go to a warehouse sale!!!!!!!
I only use Valvoline and Maguires because of you brother!! They have been so good to you and they are such a great product that I couldn’t think of using anything else.
😂 Valvoline is the same as mobile it’s all just about the money sane with detail shit you just pay for the name as you see you use it because of him that’s why they sponsor him to get people like you
get sabrina on the sim to that will help with getting comfortable in a "car" before thorwing her in one
I would be so hyped for the warehouse sale plan. Plus a little cars and coffee on top of that?!
I love missing a few episodes then binge watch a good like hour or so of vlogs like a movie
Yes TJ I would be down for that local sale 👍🏽😊
the sending unit is a part of the fuel pump assembly sir
Definitely bro I'd be so down to go and buy merch in person and also enjoy a good car meet 👍🏼
2019+ Cayannes rip... have been very impressed with ours. Nice work TJ's Dad
i loved this vlog with you and Calvin you guys were so funny!
I can’t stand Calvin he’s just grrrr
Hey Tj I think it would be cool if you covered that wall in your house with paintings of all the street hunter cars
Yeah I will come down to the warehouse from San Francisco. I think it will be a cool idea TJ
Sheeesh... Definitely hope you pay homie for these sick paintings. Starving artist is not even a joke
The yellow hunt & co. Hoodie bring it back in many colors.
Absolutely would travel from NYC to your warehouse teej! Hope it actually happens
I never comment tips for auto stuff. My Guy. Just leave the straight edge there for straight cuts! The body saw will follow it in most situations best to the company…..Love y’all more than imaginable.
Looks insane that build been missing these vlogs.
Thank you so much for that info I scored the valvoline hoodie which I was like dam when I missed it the first time
I live in LA. If I heard there’s a warehouse sale for hunt and co. I’d be there in a heartbeat lmao
I would really drive from LA to SD to do that warehouse sale. Would be so dope!
Teeej, awesome sauce, that was so cool, I could get my 2nd wings hoodie, and the keep moving forward hoodie and pants combo! …. Keep rocking!
You should put some LEDs around the C8 painting 🥳
I find breaks for most RUclipsrs are mainly time for them to spend to make bigger ideas. Always stay till the end, keep moving forward ✌️
But of coarse still needing time off
Hoping Jimmy told TJ to get a bash bar to protect that intercooler and front end 🤞🏼
I live in San Jose, I would definitely drive all the way to San Diego for the event 👍
he's finally going to be coming out with his own cleaning product line with Meguiars
Blitz 03’s look perfect on the S14
The painting is so good it look like a picture
Yes I’m willing to drive down Ou that’ll be exciting
Warehouse sale/cars and coffee would be awesome, I'd definitely would make the trip
hey tj, could you maybe do a full video of building the s14 when its finished? Would apreciate it!
Please do the warehouse sale!!!!! Bunch of locals watch you we OG🙏🏽
Tjs getting a product with Meguiars???? And a kit for the Z life sure is sweet
Another s2k would be amazing! also im in socal and i would be down to shop at the warehouse
Love that brz exhaust
I had no idea that the brz picture was a painting. Seriously thought it was a photo. Props to the artist.
Nothing better then watching tj when you got home from a long cold day at school
For sure there to pick up some Hunt and Company gear! 🙌
You should show us some wide open pulls with the huracan!
I would definitely travel if I lived on the west coast still!
I would definitely come to the warehouse for a sale. I'm local and my son is dying to meet you, we're both big fans.
Yes yes yes to in person shopping!
Can’t stop laughing..just love Calvin’s T-shirt 🤣🤣🤣 by the way, nice work on the S14 front bumper assemble 👍🏼👍🏼👍🏼
Stayed till the end end.. down for that meet @ your wearhouse
Got money down on my Z.Imma need a front lip spoiler and rear duck spoiler ASAP.I want to do an epic build.LO
Thank you for inspiring me to start my journey on youtube!!
this cars paint is off the chain.and as for wheels white te37's or gold or matt black with some concave
depending on when it is id drive down from WA to check out the warehouse NGL
I love the art! You should cover the wall with paintings, photos and pieces of your cars
Definitely would be interested in things I haven’t been able to get, if I was closer to Cali 😅😩😩😩
That artwork is absolutely nuts though 🔥🔥
Great to have friends 🤣 to wrench with you.💯
Let’s go warehouse sale definitely would go
Gonna look beautiful
I never knew that was a painting of the Brz I always thought it was just printed off
Lol cal with the little fingies!
When you get the roll cage you should paint it the same color as the valve cover🔥🔥
you should try to make vintage stuff, like put your cars on there as a vintage type of look, i’d buy instantly
Yes I’d be down I stay in San Francisco wouldn’t mind driving down there plus get to meet my son and I favorite RUclipsr 🤷🏽♂️🙌
I always wanted a lot off shirts but our importing department is useless and have like a 20% off getting to my house so its very risky and expensive
TBH I really wish the BRIDE seats were black.. the red doesnt look right with the midnight purple and orange valve cover
Teej comin through in the clutch for the new Z! 🙌
Definitely would travel for that!!!!! Walk thru warehouse
I would definitely make the trip down