This video really helped me start up my car. I can’t believe someone set me up with a garbage map for my turbo b-series. I got motivation to finish my build.
Great info for rookies like me. I haven’t tuned but done updates on oem stuff and biggest tip when flashing or changing ecu programming is keep a battery charger on it. 😊
Man, just solved my biges problem till now, downloading the tune the ecu has, thanks bro, keep up the good work. The videos helped and great tips, should have seen it before i left for a spin but know i know 😂😂
was wondering if u could put up a video based on boost, like showing how to set up a boost basemap, no dynos where i live unfortunately trying to get my car running
Thank ya much sir! Finally turboing my crx and going e85 Def will help me get the car ready and hopefully up to temp to make sure I don't have to big of issues before hitting the dyno
Thank you Alex I've been having trouble getting my car and I hope this what is the problem I changed injectors cams and I have no fuel pump power so I'm hoping this is it I changed the main relay and that wasn't it I checked every fuse and the fuel pump prime when I use a power prope so then only thing that I haven't done is played with my hondata
Hi Bro, thanks for sharing excellent and useful vids, I wonder if you have or could do a video how to time or get the optimal torque values for Honda Civic Type R FK8? Kind regards
Thanks this is great stuff. My car currently stalls at like 4k rpm. It has a hondata s300 My set up is h2b h23a b16 tranny, skunk 2 mani, itr throttle, 550cc injectors, walbro 255, try y header. My question is what basemap should I use while I get it dyno tune, should I add more fuel? Thanks I'm advance
I have a d16y8 with a turbo and I also have the s300 v2. When the hondata ecu is installed in my civic and I cycle the key, my fuel pump doesn't shut off. Does you know anything about this or how to fix this problem????? Please help, I've looked up countless forums on the smanager program and I've got nothing still. The only thing preventing my civic from getting a proper tune is this issue. .
I currently am about to start my car, I need to break it in before I go boost, I wanna upload a basemap. I have 2200cc Bosch injectors and Hondata 4bar map sensor installed on the motor right now. Can I upload a base map using those 2 things and run it all motor untill I break it in? Can I use my 2200cc injectors but make them shoot what a stock injector would for now?
Hey guys love the vids have a question what calibration file would get an lsvtec fully built with gsc cams 9:8:1 compression 1300 cc I’d injectors and a victor x with a gtx3076 and Hondata S300 would you choose to get me running to get to a tuner please some guidance any would be appreciated a lot
Help! So I really purchase a hondata s300. Idk if my ecu or the hondata board is broken but when I on my car I have no light on the hondata board. The only light I get is when I connect it to my laptop and it's show my a red light for no connection. So is it my board or ecu? Thank you
One question: I'm running 1000cc injectors to keep it idle steady I have to set my overall fueltrim at -30% when I bring it down to -20 or -10 it missed fire and makes a popping sounds when I'm 10% ++ throttle
Chubs Inac - You have to find your ideal air fuel through the over all fuel table or you can highlight all the fuel tables (control A) then add how ever much percent you need (control J). Hope this helps !!
@humbleperformance I’m having issues where my car after I turn the ignition to accessory and the hondata s300 manager program doesn’t give me the option to upload like my ecu doesn’t read. It use to but it doesn’t. My car sat for 3 months I charge the battery.
pls ineed help i got a question maybe any1 here encountered this problem i deleted my O2 sensors and disabled it in my tune but still throwing a code it says Code 41 for O2 sensor any1 here encounter? Obd2b to obd1 conversion 1999 ex P28chipped ecu
This video really helped me start up my car. I can’t believe someone set me up with a garbage map for my turbo b-series. I got motivation to finish my build.
Deff Helpful for people who need to get the cars ready and make adjustments as well
Great info for rookies like me. I haven’t tuned but done updates on oem stuff and biggest tip when flashing or changing ecu programming is keep a battery charger on it. 😊
Thanks again. Just refreshing my mind, and hopefully, I can street tune my EG hatch tomorrow 😅 wish me luck 🙏
It got my stock D17A ready for the street! Thank you, Humble!
With love,
Kev
Man, just solved my biges problem till now, downloading the tune the ecu has, thanks bro, keep up the good work. The videos helped and great tips, should have seen it before i left for a spin but know i know 😂😂
Very helpful thank you for making this I just purchased Hondata s300 v3 will come in handy before I go to dyno
Need more videos like this
Nice video just what I was looking for.
Thank you! Came just in time.
Shawn Rainford - Your Welcome !
was wondering if u could put up a video based on boost, like showing how to set up a boost basemap, no dynos where i live unfortunately trying to get my car running
check Huntertuned channel here in RUclips
Thanks for showing how to do this.
Thank ya much sir! Finally turboing my crx and going e85 Def will help me get the car ready and hopefully up to temp to make sure I don't have to big of issues before hitting the dyno
Perfect video this helped me out a ton with my B20 Vtec s300 for a start up am sure it will help out there’s trying to make it on the dyno
Thanks. I'm definitely gonna use this to start my car soon
thank you that helps because i would like to at least start the car when its together. that satisfaction is needed after a full rebuild😂
Thank you This video helped me a lot. Keep up the great work!
Very helpful to do that initial setup. thanks for this.
Thank you very much, very helpful
Your vid helps a lot!
Buttered Toast - Thank You !!
Very Helpful
llevo como 3 dias viendo este video para cuando llegue la hondata Alex gracias un millon
This video helps alot.. thanks champ
This is good stuff
Good to know! Thanks for the tips!!
Definitely like it ! How about when you have coil packs is there anything you have to change ?
Thanks guys
Thank you Alex I've been having trouble getting my car and I hope this what is the problem I changed injectors cams and I have no fuel pump power so I'm hoping this is it I changed the main relay and that wasn't it I checked every fuse and the fuel pump prime when I use a power prope so then only thing that I haven't done is played with my hondata
Don't mind me i'm Binge watching......good info
Hi Bro, thanks for sharing excellent and useful vids, I wonder if you have or could do a video how to time or get the optimal torque values for Honda Civic Type R FK8? Kind regards
Thanks for that
Thanks this is great stuff. My car currently stalls at like 4k rpm.
It has a hondata s300
My set up is h2b h23a b16 tranny, skunk 2 mani, itr throttle, 550cc injectors, walbro 255, try y header.
My question is what basemap should I use while I get it dyno tune, should I add more fuel?
Thanks I'm advance
Edgar Navarrete can you explain a way to fix the barometric sensor/code p1106 voltage low but within range
I have a d16y8 with a turbo and I also have the s300 v2. When the hondata ecu is installed in my civic and I cycle the key, my fuel pump doesn't shut off. Does you know anything about this or how to fix this problem????? Please help, I've looked up countless forums on the smanager program and I've got nothing still. The only thing preventing my civic from getting a proper tune is this issue. .
I currently am about to start my car, I need to break it in before I go boost, I wanna upload a basemap. I have 2200cc Bosch injectors and Hondata 4bar map sensor installed on the motor right now. Can I upload a base map using those 2 things and run it all motor untill I break it in? Can I use my 2200cc injectors but make them shoot what a stock injector would for now?
Love it
Good to know 👍thanks
Hey guys love the vids have a question what calibration file would get an lsvtec fully built with gsc cams 9:8:1 compression 1300 cc I’d injectors and a victor x with a gtx3076 and Hondata S300 would you choose to get me running to get to a tuner please some guidance any would be appreciated a lot
Help! So I really purchase a hondata s300. Idk if my ecu or the hondata board is broken but when I on my car I have no light on the hondata board. The only light I get is when I connect it to my laptop and it's show my a red light for no connection. So is it my board or ecu? Thank you
Thanks
Hey I have question. What software has variable launch settings? Idk if I say it right
What if I have RC 440'S but there is no option to select it. Don't know the dead time chart
What kind of laptop I can use to work on Hondata ?
One question: I'm running 1000cc injectors to keep it idle steady I have to set my overall fueltrim at -30% when I bring it down to -20 or -10 it missed fire and makes a popping sounds when I'm 10% ++ throttle
Chubs Inac - You have to find your ideal air fuel through the over all fuel table or you can highlight all the fuel tables (control A) then add how ever much percent you need (control J). Hope this helps !!
So add fuel on the fuel table and see how it perform.. thanks champ
Chubs Inac - Yes Sir
@humbleperformance I’m having issues where my car after I turn the ignition to accessory and the hondata s300 manager program doesn’t give me the option to upload like my ecu doesn’t read. It use to but it doesn’t. My car sat for 3 months I charge the battery.
Did you ever get it situated?
Yeah just had to redownload the program and have the latest update lol very odd.
Why won’t the check engine light stays on with key on only s300 v3 first install on civic OBD1
Thats good to know its a bit the same with k pro
Hey how do you remove the immobilizer on the k pros
I have an Hondata S200 Tune in binary code. Does anyone know where the fuel map starts in the binary I am trying to transfer S200 tune to S300.
Thanks
can you do this with the hondata version 1 also?
Can u do one for kpro,
How to add more boost table ? Id like to have more rows
When. Mentioned maps being Corrupted? So a tune can go bad
Can i get basemap hondata s300j b20 vtec
On my hondata it doesn’t show a base map for a p06 is anyone else having this?
I need a base map for a H22 with greddy turbo kit
anything that can help my build from surging? will shutting off my iac help?
sleeved built b20vtec boosted
Arnold Machado - What exactly is it doing ?
HumblePerformance surging from idles at 2500 then dumps to 700 then up and down. got a alpha skunk 2 manifold with no iac.
Arnold Machado - Sounds like you have a vacuum leak somewhere.
pls ineed help i got a question maybe any1 here encountered this problem
i deleted my O2 sensors and disabled it in my tune
but still throwing a code it says Code 41 for O2 sensor any1 here encounter?
Obd2b to obd1 conversion 1999 ex P28chipped ecu
Did you get an answer?
How about crome? 😅
Do you have fb
I mean say on
Very helpful thank you
Super helpful thank you