AIRCRAFT | A330 GE CF6 - Fan Blade Removal and Installation
HTML-код
- Опубликовано: 23 авг 2024
- #Aircraft#Airbus#Maintenance#Fan#Blade
AIRCRAFT | Airbus A330 GE CF6 Engine
Fan Blade Removal and Installation (Maintenance)
How to Remove and Install Fan Blades
हवाई जहाज | Airbus A330 GE CF6 यन्त्र - फैन ब्लेड निकालना और स्थापना (रखरखाव)
Pesawat terbang | Airbus A330 GE CF6 Mesin - Penghapusan dan Pemasangan Blade Kipas
Phi cơ | Airbus A330 GE CF6 Động cơ - Diệt cánh quạt và lắp đặt (Bảo trì)
อากาศยาน | Airbus A330 GE CF6 เครื่องยนต์ - การกำจัดและการติดตั้ง Fan Blade (การบำรุงรักษา)
Kapal terbang | Airbus A330 GE CF6 Enjin - Pembuangan dan Pemasangan Bilah Kipas
বিমান | Airbus A330 GE CF6 ইঞ্জিন - ফ্যান ব্লেড অপসারণ এবং ইনস্টলেশন (রক্ষণাবেক্ষণ)
Aeronaves | Airbus A330 GE CF6 Motor - Remoção e instalação de pás do ventilador (manutenção)
Subscribe to Discover more clips:
www.youtube.co...
Looking to purchase some of these engines for my camper van of eBay never realised a service guide was available on RUclips, now thankfully I can do it properly and not rely on my dealership cutting corners. Thanks again
Well that's saved me a trip out...I was about to drop my A330 down to Halfords for a new fan blade
Thanks, Saved alot of money doing it myself
Ricardo Tabanico I decided to do it by myself as well. Luckily this video showed how.
Wahnsinn es gibt schon Intelligente Menschen auf der Welt wo solche Maschinen erfunden haben .
Thank you so much, now I can do it with my own Airbus A330.
+computergames5 Or my personal working GE CF6 engine model. :)
TristanLS lá
TristanLS k
.
هههههههههههه hahahahaha
😂😂
Good Engine the Cf6 they are on Boeing 767s and 747s alot of operators use these on thier entire fleet yes the 330 has the Cf6 as well with 100 inch fan case as its slightly larger than the 767 fan case which is 94 inch something similar to the PW 4000 engine nice video and gives a little of what goes on in hangar maintanance of aircraft engines
I skipped step 3 and forgot about the spacers, but my plane flew Okey.
wow never knew that one blade was changeable in pieces.thanks for that knowledge
Thank you...now to send my aircraft mechanic resume out to several airlines.
I tell ya what, them fan blades sure are espensive! To save some dough I just took one of em ere blades off my commercial field mower, put it in my bench vice, twisted it some, and ground it to proper length My 747 runs OK now, but shakes a bit Probly be fine, and I saved a whole bunch money!
Nice trick
My self I do it differently
I will try this
Thank you 🇩🇿🇩🇿🇩🇿🇩🇿🇩🇿👍👍👍
I just did mine. It worked!
When we think about it, we can tell life of many people traveling by planes everyday is depends on maintance guys.
I'm a really big fan of this video.
Geesh I could almost change the fan blade with this guide
Very good job😍😍😍😍
What a beautiful Fan blades.
Now i have to get a CF6 Engine to put it in my garden to use this knowledge
lol
WOW! NICE CAN U PLZ POST DRUNK PILOTS REMOVAL FROM THE FLIGHT DECK ?
So that's how they replace one of the three Norelco blades for Chuck Norris's shaver...
Lovely music and good voice
Does this turbo have variable blades? I'd like to install this to my tdi passat.
It's got 6 sets of them.
Can I buy third brand blades from eBay ?
This video makes it seem very easy to get these blades out and in. Let me tell you from experience, these blades don't play nice 😂
Fan tastic ! 👏
Mid-span shroud, It'll get you every time.
Nice video.......................
Very nice instruction.
officially i am an engine managment technician now after watching this video
That's good. Can u just not work on the plane I get on though..... LOL
+VWGTI when is your flight airport and time please
This video doesn't explain how to properly remove bird remains from the motor
Flamethrower....
you are genius people
and now with a complete set fanblades with new platform seals :)
super..very easy to make jet engine
thank you so much for sharing vedio...Dnt you have other vedios?
yang baik untuk yang baik!
SO many chance for human error...good Lord!
"Category: Fan Blade Removal Installation" -Alex Trebek
Very accuracy work.
и всё-таки без молотка никак )))
Love the organ funeral music, are we acknowledging the death of the 330 at the hands of the 777?
WHAT ABOUT MARK PROTECTION BEFORE SPRAY
Thanks for sharing! Amazing how massive the blades are! How much a blade weight?
I wanna know too ☺️
good idea to use that fan in my room
Nice tacknical work
Why am I watching this I don't even own an Airbus A330 GE CF6 engine
This is scary think about this @ 40 thousand feet...Wow..
What does the lubricant apply on STG1 fan blade for what?
This lubricant compound / spray is called molykote. It is a high performance Anti-Friction lubricant, can withstand extreme tempreatures and speed. Final result is : less vibration of the N1, results in less vibration in Airframe/Aircraft.
@@SUPERCHARGE7 Yes, and not cheap...About $55 US dollars a can.
Very nyc work
Strange backing musical track for this procedure????
Thank you sir, that will be $3000 plus any parts.
Why im watching this?
.
.
.
Its available on ebay?
Sometimes they come apart by themselves. The bigger they get the more inertia there is at the tips. At MTO they sound like a buzz saw. Vibration is not a good thing for any engine.
Why don't GE giving hand gloves to worker,,, , , you are GE dear bro
Installation tool available at harbor freight? My GE engines becoming a money pit.
Sounds like a Mellotron being used in the soundtrack.
बहुत सुंदर ज्ञान प्राप्त हुआ
धन्यवाद 😁😁😁😁🔧🔨🔩✈🚀
Great mr joe
Who is the team that has to write the service manual for these. Holy shit, it must be like a 24 set of encyclopedia Britannica.
can this operation be performed in flight?
Avoid of delay, and lowering maintenance costs, we do always in flight conditions. Little bit cold, and windy, but after a few times, You get use to it. :D
A380 airbus will burn 81,890 gallons of kerosene every 24 hours, and they blame the motorist .
How many cars run on kerosene?
Ok....I'm sure every wrench turning nerd like me is wondering the same thing....so I'll say it....why on a multi-million dollar jet engine....are they using bolts that are longer than necessary?
I love videos like this BTW...thank you!
Special blade tool available from factory for under 50,000 USD
madisonelectronic *China makes them for $50*
I like this music. What is it
Had to pull regularly meself up for thinking I was going to a funeral.
I changed my fan blade, but there still seems to be a wobble in the engine. I guess I am off to pep boys to get a replacement.
Did you miss a few bolts,not a big deal.
If anyone needs there fan blade removed and rebuilt , I am in the know how to do this job. Contact me via PM for low pricing.
ilovemywife2685 sxaaa
yo mate i gotta old 757 of my granpa and the bad boy got some problem with blades. how much would it cost to replace them blades
nice bro
informative
Is this video made for the Do-it-yourself guys....??
I like ti👍
As a retired b52 mechanic and tsa captain. I would have to disagree with the instruction in this video. The blade to to shroud clearance should be checked after replacement of any fan blade.
huh. That's same way I change blades on my bedroom ceiling fan.
I'm lost in RUclips again ☹️
Super kapan saya bisa terbang bersama kamu Gratis
GE engines any good ?
@soaringtractor you are the most annoying POS ever
yang ditokok nya bukan baut atau mur melainkan sivi
👍
How times have changed,
Only one bolt for each fan blade? Now we know what happened on the SW flight.
Where does one get a can of the lube?
It looks like Molykote
Will the procedure work on a A340 ?
xl ,🌵🎐🎐🇬🇷😵. 🤑😂.
Yep...you can apply the same procedure to a fan blade in a car...😂😂
Yep - only a problem, no GE CF6 on 340 :P :D
Ok
Interesting. But isn't it better just to use the Trent 700 with total care?
ceva extra cu multumiri
I just wonder why the technican has no gloves?
Economi
Thanks just always refer to AMM..
Rather surprising that you don't have to re-balance the fan. At 3600 RPM, it only takes a small imbalance with something that size be vibrate like crazy,
Each blade has a pre-measured moment arm value marked etched on the blade, and the clip in fact points it out.
No safety wire?
Don't need it, they're stiff nuts on the bolts, but they should be replaced if the run up torque is too low
@@superseven220 Nice...We call them locknuts.
GE 90 -115B the most powerfull engine from GENERAL ELECTRIC
i don't want any voice in the middle of music
High levels of sulphuric acid from kerosene in the atmosphere are causing serious problems of engine corrosion. so much going on I would never fly.
How would anyone use this in there everyday life. If are this kind of mechanic you should know this.
everything is possible.I will too.
I wonder how much one of those fan blades cost... Anyone have an idea ??
FOR 744F CF6-80C 4000USD FOR ONE FAN BLADE.
Found one on Ebay for a lot less.
T H؛ سسسسششضضششششششششششضشضضضشضضضضضشششضضضشششضضضضضض١@
WHY BACKGROUND MUSIC?
i would like cell my boeing 777 engine
would feel a lot better about flying if they wrapped duct tape everywhere..........then maybe engines wouldn't keep falling off.
Duct tape. The jet mechanics secret weapon.
As if I will have 2 do one
a to z step by step to batau