Not sure if she still works for Hunter but I would clone this lady. She has the best explanation of how to change/eliminate water times. Outstanding job!
very helpful. I have the issue now, and can't wait to get home and fix it. Also one more thing she didn't cover in the video. There are 3 sets of "start time" programs that you can setup. They are categorized into Program A, B & C. In the video she only went over the "A" start-time programming. You should also check Program B & C to ensure that you haven't set a start time there as well. You can get there by pressing the oval "PRG" button on the control, and follow the the guide in this video.
Thank you!!! I had hit reset several times, thought I had a faulty box. I thought I was telling it to start “line 1 at 7:30, line 2 at 8:00 etc… “ was getting annoyed when I’d see it still running well into 10:00 onward..
We just bought a new house and apparently somebody programmed A and B but I didn’t know how to shut off the B circuit until you showed me thank you very much for the video you are a lifesaver.
Wow, I feel so stupid. I just submitted a claim with my homebuilder’s warranty because I didn’t watch this video first. I thought something was wrong with my sprinkler system because it kept coming on all day haha. Thanks for the video.
THANK YOU!!! THANK YOU!!! THANK YOU!!! I was just about to go buy another controller as I was doing it exactly as you said, considering each of the cycle sessions as zone timers. THANKS AGAIN!
Thank you. The person who had installed my new home's sprinkler system did just that. Thanks to your video I got on the controller and eliminated the number 2, 3, and 4 Run-time.
This was a good video for the canceling of the extra run times. You might have explained a little bit more of the "Program A" meaning because whoever set this up certainly didn't understand that concept. Just a thought.
Thanks ever so much - this really helped me out ... Love my Hunter Controller, except for the Start Time issue, it has been much easier to use than the other brand, we use to have.
I have the Hunter XC and have one of my stations running randomly in the middle of the night. I have cleared out all scheduled times except for one. This system worked just fine until recently. I live in California so we have had multiple power interruptions (rolling blackouts). Any advice? Could the power interruptions caused the issue?
Hello, i have a question. Repeating watering will happen also when we set for example 3 starting times but at the same time? For example 1st start time at 6, 2nd at 6 and 3rd at 6?
Best video hand down. I wish the manual had this explanation. Wasted so much water with not knowing this
Thank you!
Not sure if she still works for Hunter but I would clone this lady. She has the best explanation of how to change/eliminate water times. Outstanding job!
I agree!!
After 5 years I finally just found this information out . Thank you !!!
Glad it was helpful!
very helpful. I have the issue now, and can't wait to get home and fix it.
Also one more thing she didn't cover in the video.
There are 3 sets of "start time" programs that you can setup.
They are categorized into Program A, B & C.
In the video she only went over the "A" start-time programming. You should also check Program B & C to ensure that you haven't set a start time there as well. You can get there by pressing the oval "PRG" button on the control, and follow the the guide in this video.
WOW so that's why it was running so many times and my grass was rotting.
Thank you.
Glad it helped
Thank you, I couldn't figure out how to stop my sprinklers going off twice a day, now I easily made the adjustment
You're welcome! Glad it helped.
Wow thank you, no one has explained this, has been a constant problem, can’t thank you enough
Glad it helped
Thank you!!! I had hit reset several times, thought I had a faulty box. I thought I was telling it to start “line 1 at 7:30, line 2 at 8:00 etc… “ was getting annoyed when I’d see it still running well into 10:00 onward..
I had the exact same start times as the set up in the video, lifesaver! So glad I found this video.
Fantastic!
Even after 12 years, your video just resolved my issue. Thank you so much & you just earn my 👍! 👏👏👏🙏
Glad it helped
Still helping your customers all these years later! Thanks!
Happy to help!
Wow. I’ve been looking for a video like this for so long!!! Thank you for cutting my water bill in half!
Too many start times is a quick way to waste water and have unhealthy plants.
We just bought a new house and apparently somebody programmed A and B but I didn’t know how to shut off the B circuit until you showed me thank you very much for the video you are a lifesaver.
Very helpful. Answered my question in a timely fashion. I didn’t have to listen to a whole you tube program to get to the answer
Glad it helped
Several MONTHS of banging my head against the wall thinking this thing was broken, I think I have now figured it out thanks to this video. Thank you!
Wow, I feel so stupid. I just submitted a claim with my homebuilder’s warranty because I didn’t watch this video first. I thought something was wrong with my sprinkler system because it kept coming on all day haha. Thanks for the video.
Glad it helped
Thx. I was crazy 😜 with the multiple runs. I just fixed it 🙏
THANK YOU!!! THANK YOU!!! THANK YOU!!! I was just about to go buy another controller as I was doing it exactly as you said, considering each of the cycle sessions as zone timers. THANKS AGAIN!
You saved me from buying a new unit to replace what I was sure was a broken device. Thank you for the video and also...wow.
Awesome! Thanks for watching!
Thank you so much, this is the only video I've watched that showed me where the OFF selection can be found! I'm grateful!👍
Thank you. The person who had installed my new home's sprinkler system did just that. Thanks to your video I got on the controller and eliminated the number 2, 3, and 4 Run-time.
Clear and concise. Wonderful explanation and demonstration. Great video.
Glad it was helpful!
Very clear explanation. I was having that problem, followed the steps and corrected it. Thanks for a very good video.
Thank you
YOU HAVE JUST SAVED ME GALLONS!!!!
I am back again! It appears that my system likes to reset when the power blips, so again very helpful.
Glad it helped
Omg months and months without using my brand new system because I didn't understand it. Thank you so much
Yea it’s counterintuitive. Thanks for the simple explanation.
You're welcome!
Thx this was so helpful I was trying to figure out why my system was going off multiple times a day
Thank you so much! It was shutting off my well pump because the sprinklers for several stations were coming on at the same time.
Glad it helped
Thank you so much. I thought I was losing my mind!!!
Same!! 😂 thanks!
Her explanation helped me big time! Much more helpful than the manual.
Glad it helped
Simple yet great explanation.
Thank you tons.
Glad it was helpful!
This was a good video for the canceling of the extra run times. You might have explained a little bit more of the "Program A" meaning because whoever set this up certainly didn't understand that concept. Just a thought.
Thank you. This is EXTREMELY helpful
Glad it was helpful!
These visual helps are great. Thanks so much.
This solved the problem I had as I also thought those were stations. Thank you
That got me confused once too, thinking they were valves 1,2,3,4 instead of 4 start times per day.
This is a common question asked on my Sprinkler Channel as well.
I was about to throw away the system and buy a new one . Thank you so much for this video
I think you just solved my problem! Thank you!
You're welcome
Thank you very much for sharing & educating, this is exactly what I needed.
Glad it was helpful!
Wow. This explained exactly what I was doing wrong. Thank you!
Thank you!!! Our sustem was programmed when we moved in.. all three programs a,b &c for all 4 start times. Ridiculous.
Ahhhh… so that was my problem. Now it’s no longer a problem. Great video!
Glad it helped
Very good and clear instructions...thank you.
Thanks! I was wondering why my system was watering for like 6 hours straight!
Happy to hear this helped!
Definitely thought these were my stations. This video was super helpful!
Glad it helped
Fantastic! Really appreciate the video, I was going to replace my clock but now it's all good. Thank you so much!!
Glad it helped
I found this quite... informative ;)
Glad it helped
THANK YOU !!! My system is now working correctly... this was the fix..❤
Glad it helped
Thank You!! Wish I clicked your video first.
Glad I found this video… I was about to throw this system away!
Thanks for watching. We are happy to help anytime. Please email support@hunterindustries.com if you need additional assistance.
Thank you-that problem was driving me crazy!
You're welcome!
Thank you problem solved quickly, I also thought those were stations.
Very,Very helpful ? Thank you ,after 13 years !?
Glad it was helpful!
Thank you!! I was just about to purchase another controller thinking mine was broken!
You're welcome
After watching hunters of video this is the best
Yep! Just what I needed!
Great! Thanks for watching!
You are a life saver. Thank you so so much.
beautiful explanation thank u that was my main problem.
Glad it helped!
Yes! very clear and very important to know.
Fantastic!
life saver! Thank you for sharing!
You're welcome
Thank you! This is exactly the problem I was having and your solution worked!
Glad it was helpful.
THANK YOU!!! This was soooo helpful!
Glad it was helpful!
Thank you very much I finally found the right video 👍
This is awesome!!! Thanks for sharing this video.
Glad you enjoyed it!
THANK YOU! I was going to crazy!!!
Happy to hear this helped!
Smart and adequate explanation
Thanks, we're glad it helped.
Thanks ever so much - this really helped me out ...
Love my Hunter Controller, except for the Start Time issue, it has been much easier to use than the other brand, we use to have.
Well there’s my problem solved. Thanks.
Thanks for watching!
Thank you so, so, so very much !!!!!!!
You are so welcome!
Perfect explanation. Thanks!
You're welcome
Very good explanation,,I can't wait to fix it tomorrow😂😂
This saved my butt!!!
Thanks for watching!
Thank you. Solved my issue
Awesome! Thank you for watching!
Finally! Thanks
Thanks for watching! hope this helped!
Thank you so much. Problem solved!
Glad it helped!
Thank you. Was very confusing seeing my sprinklers watering at odd times
Glad it helped!
Perfect! Thank you.
Glad it helped!
Very useful information.
Glad it was helpful!
So helpful thank you so much
Wow this video was very helpful!!
I’m confused 🤷♂️???? So I’m still watering all stations even if I only select 1: 2:00am?? I have 3 stations . Help please
I have the Hunter XC and have one of my stations running randomly in the middle of the night. I have cleared out all scheduled times except for one. This system worked just fine until recently. I live in California so we have had multiple power interruptions (rolling blackouts). Any advice? Could the power interruptions caused the issue?
@@Hunter_Landscape_Irrigation Thank you so very much for the quick response. I will give that a go and let you know!
Thank you-thank you. 😊
You are so welcome!
Hello, i have a question. Repeating watering will happen also when we set for example 3 starting times but at the same time? For example 1st start time at 6, 2nd at 6 and 3rd at 6?
Explained very well,
Thanks for watching!
Thank you, this video solved my issue ;)
You're welcome
Gracias!!! I was going to return the controller .... 🤦♂️
Happy to hear this video helped! Thanks for watching!
very helpful.
thank you so much i did that mistake thinking if was the stations.
Thank you. Big help.
Glad it helped
Very helpful. Thank you.
Glad it was helpful!
Wow. So helpful
Very Helpful
Glad it helped
Excellent!
Glad you liked it!
Thank you so so so much ...
You're most welcome
Thank you, thank you.
Glad that you found the video helpful.
Do you need to provide a time cushion between timers, i.e., if one sequence ends at 5, do you have to start the next one at 5:15?
No need to add in a time cushion between program start times.
Thank you! #TheButtonsTho
Thank you so much
You're most welcome