@ mk2mike & XSivPSI The 5.2 to 5.5 is just what the buell tuning guide says. It confused me as well. I would just set it according to RPM and don't worry about the degrees.
I just need some help getting the whole ecm spy thing figured out...some guy helped me last time, I plug in the cable after I start the bike then will the window pop up where I can choose gauges ... or what ?
Hey there, appreciate the video but this just did something unexpected to my bike. The ECM read that I was at approximately 22% so I kept turning it until it wouldn't drop below 5.1% for some odd reason. So I decided to just screw it back up higher and tried to start the bike. It jsut clicks very loudly. I even screwed it in all the way then tried starting it with the same failure. I'm sure if unscrewing this too much could lead to problems? Now my bike doesn't start whatsoever 03XB9r.
I found the software, but I have a question about changing the map, I have an XB12R and it has a gutted out stock pipe that pops like crazy on deceleration, I checked for exhaust and manifold leaks and they are good. The only thing left is a lean fuel mixture, but I don't know how to adjust the map, do you have any info on this problem?
hey dave: i just did my 2007 uly tonite and could only get tps signal to drop to .7 never hit zero. and i know adjuster was backed way out as i removed entire airbox and base to look at adjuster. then ran it in to get the 5.5 # on tps. did this ever happen to you where you couldn't get 0 number for the reset? thanks much. john lutz/mid atlantic cycle
how important is the process after have your bike dyno tuned? i have just spent $1300 and my bike is worse spluttering, flat spots, and struggles to start, the tuners seem to be out of ideas, they have replaced spark plugs, 02 sensors, coil packs.
after this procedure my bike is at 3500 rpm being at 140 degrees, lowering the rpm to 1050, the tps is at 4.1 degrees and the bike seems to detonate, i don know what is happening
I tried to use this video but the stupid, gigantic logo was blocking some important information rendering the video useless for me and my computer. Very frustrating!
Thank you for posting this. Still using it on every TPS reset in 2023 😅
This will help SO many people!!! Great Job Dave....
Thanks again Dave. This has saved me a lot of money.
Thanks for making this video. I just rest the tps on my XB, and it worked like the vid.
Buellxb.com is the sh*t.
Dave you have helped a lot of people!
Do you regain lost power by resetting the TPS?
How do I know if it needs to be reset?
Thanks! You helped me out a lot!
thnx for sharing :) helped me do this right the 1.st time
Hey I have a 09 buellxb12r and needs tune because baffles were taken out of the exhaust will this procedure work also or is it different steps
@ mk2mike & XSivPSI
The 5.2 to 5.5 is just what the buell tuning guide says. It confused me as well. I would just set it according to RPM and don't worry about the degrees.
I just need some help getting the whole ecm spy thing figured out...some guy helped me last time, I plug in the cable after I start the bike then will the window pop up where I can choose gauges ... or what ?
Pretty cool, thanks!
I was wondering what and were you got the headlights on the demo bike. Thanks
I have 2003 XB9R . Can I get any help on the timing .
Where do I get this program
Just reset my TPS. After adjusting the idle to about 1050-1150 my TPS is at 5.8-6 ish. Is that okay? Thanks
I just bought the cable but it didn't come with the software and I can't find it, Can you tell me where to get it?
I have a 2009 Buell XB12R, is there an ECMSpy for that?
Thanks for the video!
Hey there, appreciate the video but this just did something unexpected to my bike.
The ECM read that I was at approximately 22% so I kept turning it until it wouldn't drop below 5.1% for some odd reason.
So I decided to just screw it back up higher and tried to start the bike. It jsut clicks very loudly. I even screwed it in all the way then tried starting it with the same failure.
I'm sure if unscrewing this too much could lead to problems?
Now my bike doesn't start whatsoever 03XB9r.
I found the software, but I have a question about changing the map, I have an XB12R and it has a gutted out stock pipe that pops like crazy on deceleration, I checked for exhaust and manifold leaks and they are good. The only thing left is a lean fuel mixture, but I don't know how to adjust the map, do you have any info on this problem?
did you still have the software?
hey dave: i just did my 2007 uly tonite and could only get tps signal to drop to .7 never hit zero. and i know adjuster was backed way out as i removed entire airbox and base to look at adjuster. then ran it in to get the 5.5 # on tps. did this ever happen to you where you couldn't get 0 number for the reset? thanks much. john lutz/mid atlantic cycle
Thank you so much for this video. I just got a cable and copy of ECM spy. The local HD dealership totally botched the last TPS reset.
Where I can get the cable and the copy of ECM spy bro?
www.ecmspy.com/
You can google for a cable (ecmspy cable), there are pre-made and make your own options.
Will this work with an 00' x1 lightening?
Also curious
how important is the process after have your bike dyno tuned? i have just spent $1300 and my bike is worse spluttering, flat spots, and struggles to start, the tuners seem to be out of ideas, they have replaced spark plugs, 02 sensors, coil packs.
Did they check timing?
How do you set idle speed? I don't get that from the video
Glad I have an 09.
@Jacky Drywater Don't have to do all that on an 09.
@XSivPSI id like to know this as well as when I set my tps to these values my idle is around 900rpm
after this procedure my bike is at 3500 rpm being at 140 degrees, lowering the rpm to 1050, the tps is at 4.1 degrees and the bike seems to detonate, i don know what is happening
So the tps is NOT the idle setting, but then what is TPS?
What's different on a 02 X1 W, if anything?
where are you located ?
jed
niiiiceeceee!!!
I tried to use this video but the stupid, gigantic logo was blocking some important information rendering the video useless for me and my computer. Very frustrating!
Why put the music?!