P B Plumber The life of a jobbing plumber #96
HTML-код
- Опубликовано: 10 сен 2024
- TRADIFY FREE TRIAL 👉🏽 bit.ly/3SwaAgS
UNILITE NECK LIGHT 👉🏽 unilite.co.uk/...
POWERTOOLMATE 👉🏽 www.powertoolm...
Velocity pro gear 👉🏽 www.velocity-p...
Toolmonster 👉🏽 use MONSTERPB for 10% off at toolmonster.store
If you like my videos and want to help me make more, you can Join my channel here 👇🏼
/ @pbplumber
Another fantastic installation from you two. Top works, l should think the owner of the house was well pleased. As for the cricket pitch job, beautiful boiler room on completion and the workmanship is unbelievable.
Excellent video great teamwork, always like seeing Marcus and Glenn involved, good luck in the marathon Pete 👍
Had my olive puller for a couple of years now, I find it really handy for doing a house full of trv’s as it looks better changing the nuts rather than leaving the old painted one in place.
Although I’ve personally never used an impact on it, I’ve only ever used the manual handle. Far to easy to spin a pipe lose from an old elbow and cause a leak.
Just my personal preference 👍🏼
The time you save with the impact and you can resolder a bit of copper on in about 1 min, saves time tbh
@@killerbean9911 I’m sure it is quicker, but I’ll stick to the good old manual way👍🏼 probably take 10mins more over a job. what happens if there’s a 10mm under the boards or worse concrete!! Spins it into shit then the 10mins is well worth it?
@@paulthompson5416 fair point tbh, but I wouldn't do it unless it was accessable just incase
22:06 absolutely brilliant installers quality work
You lads do really fine work, regardless of the circumstances. Good on you.
I agree with your premise about the aesthetic positioning of the radiators/pipes in relation to the window.....looks better.
Go hard on the marathon Pete! Supporting ya from New Zealand 👍🏼
Very nice work, lucky customer.
im assuming the lagging was tested? wouldnt touch that with a barge pole
I've had the olive puller removal tool for about 6 years now I love the puller.
Ты крут мужик 😉 мне очень нравится смотреть на твою работу. Прекрасно когда работа приносит удовольствие 😎
I’ve used my monument puller for several years, lost the 22mm bit down a void 🙄 & only other lesson was using the 15mm on a shower valve pipe & the olive was so tight & pipe thin it twisted the pipe so had to open up the wall in hallway & repipe it!! Lesson, use old nut sometimes. 😬😁
Everyones talking about the olive puller (which i agree is good) but i'm more taken by that waste pipe upto the filter on the two Veissmanns, a great feature for servicing! :)
Nice and clean work!
Hi,enjoy your videos very much,even though I'm not a plumber,I have done a lot of plumbing on my own properties and my kids,
I Bought one of those monument Olive pullers about 3 years ago,great bit of kit got fed of trying to cut them with a junior hacksaw blade so I got one,the only difference is my puller can't be used with a drill.
Nice job guys, thanks for sharing.
That olive puller i bought that im screwfix and most of the times doesn't work sometimes thread is different (fine thread) so u can't screw nut and few times with screw gun i twisted whole pipe. Pipe looked like ice-cream
For the olive puller to use it on internal olive fittings get a 1/2 inch brass coupling . This should do what you did with the 22mm adaptor
nice job,i love flush rads too,wait for the rusty water to come out ,reverse flush ,get bit more,good idear on join to fittings together,copper olives ,back to back ,is a funny trade,never know what you are going to see,and uncover ,then got fix it ,with whats on the van ,good luck with your marathon ,reminds me of when i was in the army ,on selection ,got run with kit on ,to a certan time,pti push us hard,bless them,they loved there job too,did get jelly legs after a while ,but kept going ,have fun and enjoy the run ,good luck
Nice work, just tell Glen that braided cable should not be used for that purpose as not recognised by the regs.
Interesting you say that. I have always been taught to use SY until recently this has been mentioned. So I am changing what electrical products I will be using
I like that tap change ratchet kit .very handy
Spot on video as usual pb, good luck on your run bro 🙌🏻
i had a banging vavlve befor i had to replace the hold thing and it fixed the probelm
Great video. All the best for Istanbul I know you will smash it. Then I can get back to my weekly fill of P.B Plumber video with a nice cup of Yorkshire tea lol. When it comes out. Remember we’re all behind you. Well not literally lol 👍👍
Cracking video PB, loving the useful tool tips, they really help. ACS for me in a couple of weeks
Great video especially liked the commercial side that Glen does. Would love to work with him for the knowledge. ( he's got bag's of it )
That job with Marcus looked a nightmare at the start but turned out well. Nice one Pete and the gang 👌
Great video mate as usual , 👍
AIB - Asbestos insulation board. Usually contains the worst kind
That olive puller looks like a good idea.
Do you guys prefer the thorough flush to the magna cleanse?
Nice one Pete keep it up, thanks 👍
Hey Pete can you please explain what the purpose of the low loss header is. What is being hydraulically separated?
Any reason you stopped doing any more work for them as our company has been asked to do some bits for them ?
Where does water drip from onto Ideal control panel electrical connection? you cut out beginning of sentence. Thanks
As a domestic plumbing g and heating engineer I find this more commercial content really interesting, would love to get involved in more of this work.
plenty of commercial guys needed in london
@Mark Harrison makes little to no difference.
@@cliveramsbotty6077 with no experience?
@Mark Harrison and? No different to if it’s failed, stop being a drama queen.
@Mark Harrison noise goes in there other than use. Levers are perfectly fine. This is complete myth who keeps saying this is wrong. Lockshields fail with no real use so I don’t use them
Great content as always. Could i ask a quick question on replacing the ICOS boiler? I have a new build 2010, nothing but problems with the Idea boiler and also starting to think about getting it swapped out. We have a pressurised system with expansion vessel and large water cylinder. What would you recommend as a replacement? its a 2 storey 6 bed house with over 20 rads. appreciate any ideas before i go asking for quotes.
Excellent work and fascinating video. Don't those seemingly narrow flexible tap pipes restrict the water flow somewhat - especially the hot water.
The tap seem high and splashy when turned on.
Do you think that pipe lagging was tested with them old boilers
Excellent!
Another great video 👍
lovely job glen, what's that plastic fitting you've found for the mikrofill tundish? thanks
3/4 female to solvent
I've had an Oliver puller for well over 10 years graet on pricework when doing fancoil units
I usually find if the olives on that tight its usually crimped the pipe slightly as well which is another pain.
Top draw as always guys
Surely the 15mm drain off just above the meter is not usable in that position.
Hey guys where did you get the spirotech flushing adapter?
Viessmann Direct sell them I think.
Great Job. Curiously to know how to deal with the gas pipe put in the wall without protection when you encountered. leave it without code or rectify? Does gas safe engineer will responsible if he leaves it and something happened? thanks
Ncs unless showing signs of distress
What is the aerosols that Marcus holding at the last minute? Saw this at the previous video as well
How come your not as active on social media now pb you used to be the man on there
Which Viessman is that? I don't think I've seen those
200w commercial. Awesome boilers
@@darrenr1995 I find the new Viessman really hard to operate. They look very stylish but it took me some time to work out how to reset the thing
@@dickiedubs3137 yes they aren’t a boiler you can just use if you aren’t familiar. Once you get into using them they are by far the best. Unlimited things you can do regarding set up and applications
As stated they are the Commercial Vitodens 200 with constant temp controllers but linked to a cascade controller
How did glen fix the light :D
Used Hilti cantelever brackets so no fixing to the ceiling
Where can you buy a thorough flush
great video as always , the code on unilite does not seem to work
My olive puller broke, poor quality
My gripped the pipe and coiled it up underneath the floorboard 😣
What brand is the tap back nut ratchet tool please? That would be so handy to have in tight spots.
Nerrad
Are you based in Leicester?
How are u able and aloud to do the wiring? i thought plumbers stay clear of the wiring as its not there job and are not insured to do so.
Glens job at the cricket club , was it SY flex he used to extend the wiring ? SY flex has no BS standard so can't be used for fixed wiring.
It can. It’s just a departure from bs7671. Just one of those grey areas
@@tomorichard exactly it's a departure. So why go against the regs when you have lots of other options. Swa , FP , kopex, conduit etc
I hold my hands up I am no electrician, I was taught however from long ago to use SY for its external durability. I have done some research on this and as you say it’s technically not meant to be used for lighting mainly, but switching etc is fine. I am changing my electrical preferences though after a few chats with some sparkies last month. It’s funny as 50/50 split with the electricians I know, half say no half say it’s fine
Sy is a standard on many instances.I believe I read that there is a manufacture that has made a sy cable which has been given a bs number. It’s only a matter of time.
@@tomorichard a company I worked for earlier this had their NICEIC inspection and SY flex had been used . They were told it's non compliant and not to use it for fixed wiring.
Was it an olive puller
Yes the new style monument olive puller
Jeez what’s that thing at the beginning :.. I want one
Still are but just used to more active it’s like you give a shit what people say don’t listen to any small minded jealous people mate
Had a few maté’s interested in buying velocity tool bags, none available so sorry , you’ve lost out on several sales!, everyone’s buying veto’s instead!
I’m speaking about the velocity 5.0 that I own by the way
I would make sure your products are available at the discount price when announcing availability 👎
Code doesn’t work
What watch u got pb??
Isn't it a Apple watch?
👍
What was that the start please
..... olive puller
@@marvinlsd new that I ment what's the name of it.
Monument
They're about £25 in Toolstation
🤘😎🤘
Can we stop seeing all this commercial bull please, you’re early videos were so much more valuable
I understand domestic stuff can become a little bit boring but some of these rich bastards houses with massive unvented systems are even more boring and less likely for most average engineers to ever even give a crap about!….
I thought original pcb was black on those wanky icos & isars