ja hab ich auch schon überlegt und viel gehört. Ich möchte ihn aber rein und raus nehmen können und da kommt man nicht drum rum ein loch in das Carbon zu machen.
Is it really a 120 mm diameter drill tool after using the 8mm one in the beginning?? I don't think so..... And you gave between 30 and 35 mm for the hole position, OK for the depth but relative to the carbon end cap width ? What's the value? It's in the middle of the flat portion?
wtf warum hast du nicht die Nieten aufgebohrt, dann kannst die Carbonkappe doch abziehen 😃 hinterher carbonkappe wieder drauf und Nieten. Zum Bohren in das Carbon könnte man auch nen Fliesenbohrer nehmen denn franst das nicht so stark aus denke ich
Anyone know the part number of that exact shape carbon end cap please ?. I bought this Akron can cheap with a damaged carbon piece. Akro have so many shapes I can I.d it.
Anyone have a problem with leaking from the mid to head pipe? Mine leaked without any sealant. I have some permatex copper gasket maker on there now curing over night. Hope that does the trick
Aucun Français n'a laissé de commentaires sur cette vidéo ! Personne n'a jamais essayé de retirer la chicane d'un akrapovic de ce style ? Si oui...écrit-moi...ça m'intéresse !
kloppi 123 Ich finde da hat sich nix geändert was man merken kann. Vielleicht würde man das auf dem Prüfstand etwas sehen. Aber einen deutlichen Unterschied merkt man, wenn der DB Killer draußen ist, das sie ein besseres ansprechverhalten hat 😊
man hätte auch die Nieten rausmachen können....... um den schönen Endtopf nicht so kaputt zu machen
DJSICK TRACE aha und das machst du dann täglich?🤨
Und so liebe Leute baut man keinen DB killer aus
Ein Vergleich des Sounds am Ende des Videos mit und ohne DB Killer fehlt noch.
easier to drill the rivets out and remove end cap to get at it.
Are i serious? Drilling a hole in that nice carbon fiber? You could just opem it by breaking up this kind of screws..
Without the hole you can't refit a db-killer.. I did the same, but i drilled out the rivets and removed the whole endcap.
That's what i meant. removing the whole endcap by drilling out the rivets. ;)
What kind of screws?
OfficialXtraload yeah but he wants to refit the db killer so he can take it out temporarily and put it back if he needs to
JANIK ~ EEZY there's still a horrible hole there tho
Könnte man theoretisch nicht auch die Nieten von der Carbon Kappe vorsichtig aufbohren und am ende nach dem man den db gekürzt hat wieder vernieten?
ja hab ich auch schon überlegt und viel gehört. Ich möchte ihn aber rein und raus nehmen können und da kommt man nicht drum rum ein loch in das Carbon zu machen.
Thank you
Das ist kein 12er bohrer sondern ein senker
Mr. Kawasaki Es ist auch kein Senker 😂
@@alexanderspitzner9938 Drehdings nennt man das 🧐
has this akra catalizator? in the front of pipe inside
omfg thats raping my eyes
I disassembled mine to dothat... then removed the nut, unscrewed the bolt that was there, and just inserted new bolt.
Is it really a 120 mm diameter drill tool after using the 8mm one in the beginning??
I don't think so.....
And you gave between 30 and 35 mm for the hole position, OK for the depth but relative to the carbon end cap width ? What's the value? It's in the middle of the flat portion?
JER SEN it is a 12mm hole
Noooo!! Drill out rivets and remove cover and then you can pull out db killer, cover can then be revitted back on
wtf warum hast du nicht die Nieten aufgebohrt, dann kannst die Carbonkappe doch abziehen 😃 hinterher carbonkappe wieder drauf und Nieten. Zum Bohren in das Carbon könnte man auch nen Fliesenbohrer nehmen denn franst das nicht so stark aus denke ich
Weil er ein Trottel ist. Mutwillige Zerstörung...
@@BigBen1307 bisschen kommentare lesen, dann wisst auch ihr 2 warum.....
Anyone know the part number of that exact shape carbon end cap please ?. I bought this Akron can cheap with a damaged carbon piece. Akro have so many shapes I can I.d it.
Sound of exhaust maybe ?
why did you drill the screw with a 10mm bit when it was enough to break the solder?
Did cutting the DB killer shorter by 7cm make it sound better?
Uhhh geil wird gleich gemacht 😍😍🔥😛
Kannst Du mir verraten wo Du den Plastikstöpsel her hast?
Gruss Tom
hab ich mir teuer aus Österreich schicken lassen. musst bisschen im Internet suchen :)
Anyone have a problem with leaking from the mid to head pipe? Mine leaked without any sealant. I have some permatex copper gasket maker on there now curing over night. Hope that does the trick
Sag mal hatte der Auspuff nen Kat drin?
ja
Do you need some tuning after removing the DB killer ?
Hi do you maby know how you to remove the new akrapovic slip on ? i got z1000 but db killer is rly pain in the asz
at some newer akras you can't remove the killer
Hola amigo el tapón negro donde lo venden? 🇪🇸
Fuck that!! Thanks I won’t be buying that pipe
Aucun Français n'a laissé de commentaires sur cette vidéo ! Personne n'a jamais essayé de retirer la chicane d'un akrapovic de ce style ? Si oui...écrit-moi...ça m'intéresse !
Hast du Veränderungen gemerkt nachdem du den dB Killer gekürzt hast ? Lauter ? Leiser? Anderes ansprechverhalten ?
kloppi 123 Ich finde da hat sich nix geändert was man merken kann. Vielleicht würde man das auf dem Prüfstand etwas sehen. Aber einen deutlichen Unterschied merkt man, wenn der DB Killer draußen ist, das sie ein besseres ansprechverhalten hat 😊
Where did you buy the little thing to fill the hole with?
from a company in Österreich. You have to search a little bit in the web ;)
Is this Euro 4 ? Thanks
Whats your outro song name?
Der arme Akrapovic
Name end music ?
Is this an Euro 4?
120mm 😂😂😂
Kommt noch n Soundcheck oder wars das?
Greenie 28 ne das war's 😀
drill carbon fiber or drill out rivets to remove db killer...hmmmmmm
其實不用鑽⋯8號T桿轉了就開了
Soundcheck?
habe ich schon versucht bloß es kommt nicht so auf video rüber :(
Kann mann auf den 701ern nicht auch die smcr auspuffe fahren dann müsste man nicht mit so einem ultra hässlichen akra rumeiern ?
Come rovinare uno scarico.....
sound chek ??!!!!!!!!!!!!!!!!!!!!!!!
Sound is a lot better after removal of the baffle :)
der Sound?!?!?! das wichtigste fehlt😕
The sound is a lot better with the baffle out :)
Completely wrong.
Drill the pop rivets, take the carbon cap of, take the db killer of. Pop some new Aluminum rivets. Done!
But then you cant put it back
ABE, Adee
Buffi 701 ABE hat das alles eh nicht von daher 😂
What a really bad way to do it..
🤣🤣🤣🤣🤣🤣🤣🤣
Dafür gehörst du geschlagen...
my god what is this tuto MY GOD , this tuti will be rename : how to destroy your exauhst
mais c'est interdit ;-)
poor akra
Kleiner Tipp: Keinen Akra sondern einen Leo kaufen ;)