There is no vibration from the wheel as it runs True. The wheel is gliding over the surface. The Rolex representative said that Rolexes are designed to take a beating. Men play golf, play sports, work construction with it. People seem to forget that these watches are designed to be worn during rough activities. ❤
There is no vibration from the wheel as it runs True. The wheel is gliding over the surface. The Rolex representative said that Rolexes are designed to take a beating. Men play golf, play sports, work construction with it. People seem to forget that these watches are designed to be worn during rough activities. ❤
These are 3M Finger protecting tape found on our website. Much better than fingercots as they conform to the exact shape of your finger and you can still feel your fingertips, it’s like having custom-made finger tips. And they become soft like cloth and don’t leave any residue.
How can she say that the metal 'moves'?! When two surfaces rub together, friction occurs thus wear is always a result. Still a great job though but as a precautionary measure, pop the bezel off or at least tape it whilst it's attached to case.
You need to study 3M technology on their surface conditioning wheels. What it does it “moves the metal” that’s why you see me moving allot as I’m folding in the metal. Similar to spreading frosting on a cake even though you’re moving it does mean you are removing any of the frosting, it’s just being moved around. Hope this helps.
I was demonstrating at the Inhorgenta Show in Munich Germany, no means or time to remove the bezel my friend, watchmakers just needed to see results, they all know how to pop of a bezel...or what I was showing they can’t do and were astonished at the results! They even measured the 2 sides after and IT STAYED THE SAME GEOMETRY as the other side!
There is no heat. These patented wheels create an Airflow because of the open slots. You get heat when you work on solid wheels. With solid wheels, he gets trapped and has nowhere to go. But with our wheels, there is lots of airflow and the piece is Cooled like Air Condition!
The Jooltool doesn’t heat up the watch. My patented disc has slots in it which allows any heat to escape through the slots and while the disc spins it creates airflow which aids to keeping everything nice and cool. Also my discs run true, almost no vibration so the movement is not compromised. Watchmakers told me that normal wear of a watch takes more abuse and the watches are designed for those that are active. Thank you Anie
Smoothing the metal without cutting off any metal? Sounds like magic!
Are you sure, resonance does not damage the clockwork?
There is no vibration from the wheel as it runs True. The wheel is gliding over the surface. The Rolex representative said that Rolexes are designed to take a beating. Men play golf, play sports, work construction with it. People seem to forget that these watches are designed to be worn during rough activities. ❤
Would remove the bezel first.
You can see that I am at the watch and jewelry tree chill in Munich Germany. Dismantling the watch in that environment is unheard of.
Please do not use rotating machinery with loose long hair and no guards in place or eye protection. Other than that.....fantastic job AAA+++!!!
Does the vibration harm the movement?
There is no vibration from the wheel as it runs True. The wheel is gliding over the surface. The Rolex representative said that Rolexes are designed to take a beating. Men play golf, play sports, work construction with it. People seem to forget that these watches are designed to be worn during rough activities. ❤
Pits caused by resting it on bare concrete, putting watch down with careless force umpteen times
The finger tips are called finger cots I believe 👍🙂
These are 3M Finger protecting tape found on our website. Much better than fingercots as they conform to the exact shape of your finger and you can still feel your fingertips, it’s like having custom-made finger tips. And they become soft like cloth and don’t leave any residue.
Great job! However I feel that a timepiece is a story of your journey. For that I would want the wear marks!
How did he get all those scratches on that Rolex. Great refinishing and polish.
my watch has a stainless steel band that is high shine finish, i wish to tone it a bit down, who can help me with this?
How can she say that the metal 'moves'?! When two surfaces rub together, friction occurs thus wear is always a result. Still a great job though but as a precautionary measure, pop the bezel off or at least tape it whilst it's attached to case.
You need to study 3M technology on their surface conditioning wheels. What it does it “moves the metal” that’s why you see me moving allot as I’m folding in the metal. Similar to spreading frosting on a cake even though you’re moving it does mean you are removing any of the frosting, it’s just being moved around. Hope this helps.
I was demonstrating at the Inhorgenta Show in Munich Germany, no means or time to remove the bezel my friend, watchmakers just needed to see results, they all know how to pop of a bezel...or what I was showing they can’t do and were astonished at the results! They even measured the 2 sides after and IT STAYED THE SAME GEOMETRY as the other side!
Wow impressive work! I wish i can have such a tool set at home. Congrats, great work.
For me ..I may have kept some pits in mines . Just me talkin here
What was used for the ventilation?
The JOOLTOOL Vacuum
Dose the heat dosent effect the watch is it not bad for the movement of the watch
There is no heat. These patented wheels create an Airflow because of the open slots. You get heat when you work on solid wheels. With solid wheels, he gets trapped and has nowhere to go. But with our wheels, there is lots of airflow and the piece is Cooled like Air Condition!
Are you selling those machine?
A watch should be worn, adds to the character. But some care and thought... Not everyone can afford Rolex. Great Job looks perfect 😁😁
How much does this heat the case up??
The Jooltool doesn’t heat up the watch. My patented disc has slots in it which allows any heat to escape through the slots and while the disc spins it creates airflow which aids to keeping everything nice and cool. Also my discs run true, almost no vibration so the movement is not compromised. Watchmakers told me that normal wear of a watch takes more abuse and the watches are designed for those that are active. Thank you Anie
Wow..si incredible..most incredible..they lady...plishing the wach...
Anie super job it just looks like the Factory finish from one Beaten up Rolex to superb Finish.
1
She is a goddess haha
Wow! Great job! 👏🏻👏🏻👏🏻
Nice
Well done
Hi Anie, what is the stock number of the wheel you used for removing the pits from the Rolex watch?
Hi Suzanna! I am using the 3M Medium Scratch eraser Wheel. And of course I polished with my Felt wheel & compound! -Anie
SCRATCH ERASER in MEDIUM GRADE.
Nice job!.
Me love you longtime.
The love and passion she has for her job is amazing
Anie you are a doll ❤️
She is very good. ?
Where is she located.
This video was filmed in Munich Germany at the Jewelry and Watch show. I live in Los Angeles!
The hands of a surgon.