I came across this by accident. i don't even need to polish any concrete but I watched it all the way through anyway and was blown away by your knowledge and ease of explaining it.
Impressive. I see many videos with Filipinos not using protective equipment or taking advantage of tools. Great to see you being very professional while also being craftsmen. I'm grinding my home floors today and learning.
well done! After searching through and watching several videos I finally found yours that did an excellent job of explaining and demonstrating how to polish concrete. bravo very nice job men
Thank you for this video. I put together black concrete counter tops. By following your instructions I wound up with a beautiful shine. Never expected it, I knew they would shine, but not like this. God Bless.
This video needs two thumbs up. Very well done! I am going to do a pre-cast top and I will grind and polish it but not without learning everything as I have zero experience. This video was amazingly helpful. Thank you. Your country code, 63 as I read it, is the Phillipines. Not that it matters but my father's first overseas deployment was to the Phillipines (60+ years ago). He spoke well of the country. Regardless if I'm wrong about the country phone code, wherever you are, it looks beautiful (at least what we saw of where you did the bench and table). I especially appreciate the inclusion of the Christian song in there by the Planetshakers. Finally, your vocabulary is very good. Maybe you could come to Los Estados Unidos and teach some to my fellow countrymen. Please. Your comment about starting your business with one grinder is moving and motivating. That warehouse/big-box store is obviously an incredible job to get hired for. Somewhere I got this saying: don't despise the days of small beginnings. You've been blessed and have done well. Thank you again for this video. God bless you as well.
Sir, thank you so much for the kind and positive comments. Yes, we are from the Philippines, and US English is being taught at school. My overseas experience is pivotal to my conversive English. I'm glad to know that this video made a significant impact on those who do not have experience with polished concrete. We started without someone teaching us the tricks of the trade, and there's only quite a few indepth guide on how to do them, the reason why we made such. God bless you, sir. I am praying and forward to seeing your progress.
It's a 150 grit sir. But depending on the pourousity and the compressive strength, you can apply after 100 to 200 grit. The more porous your concrete is you apply at 100 to 150 grit
Hello, why is the Densifier not applied after the final lustHydrolock #4 ? Doesnt polishing remove the densified concrete ? Also, why is the hydrolock better suited than the densifier to water seal the concrete ?
Hello sir. Densifiers basically add strength to the concrete. Thus, it also helps add luster to the polishing process. HydroLock, on the other hand, is designed to effectively seal the concrete and add more luster to the surface once the burnishing process is done. If you apply densifiers at a higher grit it will not be effective and will leave a thin film on the surface that is difficult to burnish. Hope this answers your question 😀
Hello Jeff, thank you for the positive comments. For small jobs like this, we use Tenax, but on a larger scale, we use a polymer mortar. I'm not sure which brands you have locally. Hope this helps 😀
Wow, great job guys. I am just starting to have a home built here in Philippines. I will be doing this process on all flooring in the house except bathrooms. Do you have a list of those supplies you used? You guys did an awesome job!!
Hello Michael. Thanks for the positive comment. The list of supplies are as follows Grinding cupwheel Resin pads (0,1,2,3,4) Nano Lirhium Densifier Nano HydroLock Treatment Have a Merry Christmas and a prosperous 2024!
Hello. We're doing well, thank you for asking. We hope you're doing great as well. As per your question. We used the typical 3/4 and 3/8 crushed aggregates that we get from local hardware (to make it a real DIY project). Mostly, the local hardware gets their supply from river quarry
@@cebupolishedconcreteandmor8907 Thank you for your reply brother. I checked the price is quite high. Is there any cheaper and better alternative products? You said we can use Portland Cement? Should we mix the Cement with other product to make it a strong and polishable Grout material?
Your location is close to a military naval base, right? The military radars are distorting your sound. You can fix it by covering as much as possible of your camera with tin foil. That said, I love how crystal clear your instructions are. Great video. Would have been epic with a voiceover. Thanks, I'm building your exact table by my natural swimming pond. I'm sharing your video with some of my friends.
Hello sir Paul, salamat kaayo sa positive comment. Sa pagkakaron pwerting daghana jud natong engagements, and we can not schedule a workshop yet. Hopefully, when things settle down a bit. Daghan man gud pamaagi sa pagpolish delending on client requirements and substrate conditions. Not all concrete are the same.
Because you are at the beach, the noise level is very high. I can hardly hear your instructions even with my volume/sound up. The video also does not need music added either when the work is in operation, it is a good instructional video, thank you. from Scotland
Hello sir. Thank you for the comments. We acknowledge that the sound/ speech quality is not so good, something that we will do better in our future videos.
A little furry piece of cloth (like some cheap clothing material from a sewing shop) over the mic hole would take care of that a lot. But the value of everything you showed and shared make the wind noise hardly a notable problem. I think the mic covers are called "mic fluffies" in the movie industry. Maybe. I'm wrong sometimes. Or a lot.
Thank you will. We have other tutorials in line very soon. It will be natural stone and concrete polishing with special aggregates. We do make a little bit of money for the videos, but our aim is to promote the industry so we can provide better services.
For the Hydrolock Treatment, there is none yet. For the densifier, there are many alternatives, but they are not dilutable. Hence, they are 2-3x more expensive in terms of cost per volume, not to mention logistics cost and storage space
X_Jesus Olivas 10:50 Step 1) 400 grit, circle polish pad 3in'3cm I believe the size of polish pad for a buffer I use Makita buffers with power cords, I love how they use the words, definitely a 3 hour progress to handle, Thank you.
@@cebupolishedconcreteandmor8907 it is made of hollow blocks and cement finish but the texture of the walls looks unevenly done. Please share ideas how to do it and what disc to use 🙏🏻
Hello. With the initial cut (cupwheel), we set the speed between 1-2. For the resin pads, we turn 1 incriment per succession of every grit. The last pad (3000 grit), we set our speed at the highest.
hi, what kind of material is this? I also polished concrete for my shower in the apartment in Taguig. but I still need this medium of the video time 7.27min. I also make videos of how I renovate my apartment with European materials
One of the best videos I've seen on polishing. How long did the actual polishing take? I would love to get more info on the products you use. Great video.
Thank you so much for the comment 😊. This was done in less than 6 hours, including the waiting time for the patching and the chemical treatments to cure.
Hi sir. Thank you for the comment. It is labor intensive, and the equipment used to polish floor is also big. A 200 sqm residential project (high gloss), normaly takes 7-10 working days, providing we can run 2 sets of equipment.
Hello maam. Yes this can be applied to natural stones, however, you need a cryatalizer on the final polishing. For synthetic granites, it's exactly the same process but you'll need to use a special bonded pads specifically for synthetics.
Hello sir, though for small touch-ups orbital sanders can be used. Unfortunately, it won't work well with concrete polishing, and we recommend to use a variable speed grinder.
Hello sir. The chemicals and the resin pads we are using are our proprietory products. You can order it from us. Please contact 09950553334 09474475151
Do you sell pads that will fit the Hilti DG150 grinder? That might be a good market for you to tap into. Thats the expensive grinder I own, but Hilti only allows for the smaller one, as shown in your video to accept polishing pads...thanks@@cebupolishedconcreteandmor8907
First time I saw a polish concrete floor at the vlog of Armstrong family there in the Philippines.Love it😍I want to have my patio done.Madulas po ba? KASI Mababasa PAG u umulan.☮️💟🇵🇭🇺🇸🇨🇱
Thank you po maam sa positive feedback. Actualy madulas po siya kung kayo po ay mag aapply ng topical sealer (clear coating). Kaya nga po ginawa po namin na mag formulate ng mga penetrating treatments to address the question po of polished concrete being slippery. May mga videos po tayo sa channel na to na tinesting po natin kung madulas nga po ba ang gawa natin na high gloss polished concrete 😀 naging test dummies po tayo kasi maraming nagtatanong hehe
Hello sir, our treatments are proprietory and is not available anywhere else. What's the total volume you wish to order? Maybe we can arrange to ship it overseas
@@cebupolishedconcreteandmor8907 Hey brother could you please help me with this one. I pre wet the floor sprayed the grout and grouted using #120 metal diamonds at slow speed made it into a slurry left it overnight and next day unable to fully remove the grout. There is still plenty of dark patches. I also tried another way of pre wet and sprayed grout but this time at 650 rpm(which is recommended by the equipment's manufacturer for#120 metal) had to use more material and the grouting's not proper. What do you find wrong in my methods/ is there any other way which you would suggest. Btw the concrete is soft and very porous and fully exposed. Thanks
Yes sir see our latest video where we restored a granuletic terrazzo floor on the link below: ruclips.net/video/0-sChcTijtg/видео.html If you need further assistance pls feel free to contact us at 09950553334 09474475151. Nakasulay naman sad tah restore ug terrazzo on a well known church here in Cebu and taga Leyte rapud ko sir 😊.
Hello sir. There is no definite answer to that as it is subject to concrete quality, the preparation done, and how skillful the user using the grinder or machine. But as per experience it can cover at least 40-100 sqm on a hand held grinder.
In terms of operational reach, that is without a doubt po but our processes is a bit different including the chemicals and diamond tooling we use, we manufacture our own. Magkasama lang din kami sa industry and we know each other well and we share the same passion. Kaya nga po the industry flourished.
Hello sir. For normal job mix it takes 4 weeks for the concrete to fully cure. You can start polishing counters in 3 weeks but for concrete floors, we wait until the designed curing time is reached.
Hello Aldean, 3-4 weeks for normal concrete mix. You can design your concrete with admixtures for 14 or 7 days curing time but the cost is a bit higher.
I came across this by accident. i don't even need to polish any concrete but I watched it all the way through anyway and was blown away by your knowledge and ease of explaining it.
You men are an inspiration. Greetings from Canada. You have given me valuable information. God bless you.
this video deserves a million views. very detailed and well explained. props to you guys! great job!
@JustinGGG thank you so much for the comment. Keep doing what you love doing
Impressive. I see many videos with Filipinos not using protective equipment or taking advantage of tools. Great to see you being very professional while also being craftsmen.
I'm grinding my home floors today and learning.
Thank you so much for the positive comment, sir. One of our inspirations is to promote a safe working practice, especially here in the Philippines.
well done! After searching through and watching several videos I finally found yours that did an excellent job of explaining and demonstrating how to polish concrete. bravo very nice job men
Wow, thank you so much for the positive comment.
I love that you said "keep practicing " it encourages me❤🎉
We're glad to have encouraged you and the many others with our tutorial
Amazing how the concrete glows Wow!!!!!
Thank you for the kind comment ❤️
An awesome tutorial! I am exploring trying this, and this will be my go-to for doing it right the first time! Thanks!
Thank you so much. We'll love to hear the results of your future projects.
Great Music Selection! May God Bless You!
Mark, thank you for the comment 🙏 God bless you more
Incredible, you’ve given me the confidence to try myself. Very inspiring introduction to your process / experience.
Hello, sir. I know our audio quality on this video isn't that good, but thank you so much for the positive comments.
You guys are great! Much love from South Africa
Thank you Scott for the positive feedback
Wow. Great video. You are a natural, bro. Greetings from San Diego.
Thank you for the positive comment brother. Greetings from Cebu, Philippines
😂😂 thank you my brothers nicely done A+ to everyone
Thank you, sir, for the rating hehe
God Bless you too for sharing your skills, impressive!
Thank you for the kind comment brother. God bless you more!
Thank you for such detailed description. Very clearly explained. Thank you. I wish you lots of luck for your work.
Thank you sir. We'll make another video very soon with clear audio.
Thank you for this video. I put together black concrete counter tops. By following your instructions I wound up with a beautiful shine. Never expected it, I knew they would shine, but not like this. God Bless.
Wow. That's great to know. Congratulations on your polished counter sir and more projects to come.
hi! how did you achieve the black concrete? been wanting this to apply in one of my projects.
@judylumpay2254 hello judy, are you refering to staining or dark colored aggregates?
Brilliant video guys, very professional and thorough, when can you come to Scotland to do my steps?? 🤣
Thank you for the comment, sir. If only we have no visa requirements, we definitely would love to do your job requirements 😀.
This video needs two thumbs up. Very well done!
I am going to do a pre-cast top and I will grind and polish it but not without learning everything as I have zero experience. This video was amazingly helpful. Thank you.
Your country code, 63 as I read it, is the Phillipines. Not that it matters but my father's first overseas deployment was to the Phillipines (60+ years ago). He spoke well of the country. Regardless if I'm wrong about the country phone code, wherever you are, it looks beautiful (at least what we saw of where you did the bench and table).
I especially appreciate the inclusion of the Christian song in there by the Planetshakers.
Finally, your vocabulary is very good. Maybe you could come to Los Estados Unidos and teach some to my fellow countrymen. Please.
Your comment about starting your business with one grinder is moving and motivating. That warehouse/big-box store is obviously an incredible job to get hired for. Somewhere I got this saying: don't despise the days of small beginnings. You've been blessed and have done well.
Thank you again for this video. God bless you as well.
Sir, thank you so much for the kind and positive comments. Yes, we are from the Philippines, and US English is being taught at school. My overseas experience is pivotal to my conversive English.
I'm glad to know that this video made a significant impact on those who do not have experience with polished concrete. We started without someone teaching us the tricks of the trade, and there's only quite a few indepth guide on how to do them, the reason why we made such.
God bless you, sir. I am praying and forward to seeing your progress.
It's good to know your father had been to our beautiful country. I wouldn't be surprised if he had a lot of good memories during his deployment here.
Great video, awesome result! Nice!
Thank you for the kind comment sir Clayton
Love watching your videos po! Hehe nagaplan ko magtry soon.
Thank you sa informative tutorial sir!
Thank you sir. Ikaw to ni message through text? Nagreply ko sa imo. Hopefully we can meet soon pag makasuroy mi dinha sa inyo
I bet the person who initially cast that bench and table never thought it could look that good.
Indeed sir. The masons were amazed that their work looked like granite slab after.
I Bet,you Will
It looks fantastic !!
Thank you for the positive comment 😊🙏
Nice! My family is from Bulasa, and Argao. Love the video!
Thank you so much for the positive comment
I love simple yet elegant polishing is.
Thank you for the kind comment 😀
What grit was the step after the cup wheel? That came before the densifier?
It's a 150 grit sir. But depending on the pourousity and the compressive strength, you can apply after 100 to 200 grit. The more porous your concrete is you apply at 100 to 150 grit
Amazing video
Thank you
excellent brother ..great tutorial and having fun near ocean the best greets from Australia
Thank you brother. We'll try to create a better quality tutorial video very soon
Hello, why is the Densifier not applied after the final lustHydrolock #4 ? Doesnt polishing remove the densified concrete ?
Also, why is the hydrolock better suited than the densifier to water seal the concrete ?
Hello sir. Densifiers basically add strength to the concrete. Thus, it also helps add luster to the polishing process. HydroLock, on the other hand, is designed to effectively seal the concrete and add more luster to the surface once the burnishing process is done. If you apply densifiers at a higher grit it will not be effective and will leave a thin film on the surface that is difficult to burnish. Hope this answers your question 😀
great video. thank you. What is the product you used to fill the cracks?
Hello Jeff, thank you for the positive comments. For small jobs like this, we use Tenax, but on a larger scale, we use a polymer mortar. I'm not sure which brands you have locally. Hope this helps 😀
Wow, great job guys. I am just starting to have a home built here in Philippines. I will be doing this process on all flooring in the house except bathrooms. Do you have a list of those supplies you used? You guys did an awesome job!!
Hello Michael. Thanks for the positive comment. The list of supplies are as follows
Grinding cupwheel
Resin pads (0,1,2,3,4)
Nano Lirhium Densifier
Nano HydroLock Treatment
Have a Merry Christmas and a prosperous 2024!
Great tutorial, very insightful
Thank you so much. Your positive comments will help us do better quality videos in the near future
Komostaka. Can you inform what aggregate did you use for your table top. Thx
Hello. We're doing well, thank you for asking. We hope you're doing great as well.
As per your question. We used the typical 3/4 and 3/8 crushed aggregates that we get from local hardware (to make it a real DIY project). Mostly, the local hardware gets their supply from river quarry
Is there a way to buy the hydrophobic treatment?
Hello sir. Yes. Please contact us at 09950553334 or 09474475151
Nice job!
What the filling/patching compund used to fix cracks there?
Thank you for the positive comment. It's called Tenax sir.
@@cebupolishedconcreteandmor8907 Thank you for your reply brother. I checked the price is quite high. Is there any cheaper and better alternative products? You said we can use Portland Cement? Should we mix the Cement with other product to make it a strong and polishable Grout material?
ang galing galing mo talaga kuya 👍
Nako po, salamat po maam 😊. Sharing our experience lang po talaga kasi alam din po namin na maraming gustong matoto.
thank you so much
Your location is close to a military naval base, right? The military radars are distorting your sound. You can fix it by covering as much as possible of your camera with tin foil. That said, I love how crystal clear your instructions are. Great video. Would have been epic with a voiceover. Thanks, I'm building your exact table by my natural swimming pond. I'm sharing your video with some of my friends.
Thank you for the positive comment and the support, sir. I am looking forward to seeing the results of your polished concrete.
paul mons sir fan of yours. hope naa kay workshop dre cebu sir in regards sa polished concrete ganahan kaayo ko ma kat.on sa mga pamaagi. salamat sir
Hello sir Paul, salamat kaayo sa positive comment. Sa pagkakaron pwerting daghana jud natong engagements, and we can not schedule a workshop yet. Hopefully, when things settle down a bit. Daghan man gud pamaagi sa pagpolish delending on client requirements and substrate conditions. Not all concrete are the same.
Thank you for this video! What is the patch kit you are using?
Hello. Thank you for the comment. The patch we used us called Tenax
Because you are at the beach, the noise level is very high. I can hardly hear your instructions even with my volume/sound up. The video also does not need music added either when the work is in operation, it is a good instructional video, thank you. from Scotland
Hello sir. Thank you for the comments. We acknowledge that the sound/ speech quality is not so good, something that we will do better in our future videos.
A little furry piece of cloth (like some cheap clothing material from a sewing shop) over the mic hole would take care of that a lot. But the value of everything you showed and shared make the wind noise hardly a notable problem. I think the mic covers are called "mic fluffies" in the movie industry. Maybe. I'm wrong sometimes. Or a lot.
This is amazing works, thanks for the video
Thank you for the comment sir. We'll do our best to improve the quality of our future videos
Amazing ta mate. Make some more please.
Hope u can monetize ur videos and make some money
Thank you will. We have other tutorials in line very soon. It will be natural stone and concrete polishing with special aggregates. We do make a little bit of money for the videos, but our aim is to promote the industry so we can provide better services.
AYOS NA AYOS!!!
GOD BLESS
wow nice job ! will this proceduce suit for flooring? and how much it would cost for a 10m x 10m to be worked this way?
Hello, thank you for the positive comment. Yes we do floors from small to large scale. Pls contact ug at 09950553334 09474475151
Do you have other similar products or beand available in Luzon that will be as effective as your proprietory product. Thanks
For the Hydrolock Treatment, there is none yet. For the densifier, there are many alternatives, but they are not dilutable. Hence, they are 2-3x more expensive in terms of cost per volume, not to mention logistics cost and storage space
X_Jesus Olivas 10:50 Step 1) 400 grit, circle polish pad 3in'3cm I believe the size of polish pad for a buffer I use Makita buffers with power cords, I love how they use the words, definitely a 3 hour progress to handle, Thank you.
Hello Margarita, thanks for the comment 😊 we use 4" diameter resin bonded pads. For the burnishing pad, it's a 7"
Great Video and solid information. What patching compound are you using and how can I communicate with you directly?
Thanks for the positive comment, sir. You may DM us in our fb page or through WhatsApp +639474475151
What was the filler compound
Hello Tony,
Thanks for the comment. Please send us an email at acerotradingandservices@gmail.com and indicate your geographical location.
Where can I buy the patching compound?
Hello Sir Winston. Thanks for the call earlier 😀
is this also applicable for concrete walls?
If your concrete wall is poured with solid concrete, yes this can be done. But if it's CHB or hardiflex, your option will be stucco or limewash paint.
@@cebupolishedconcreteandmor8907 it is made of hollow blocks and cement finish but the texture of the walls looks unevenly done. Please share ideas how to do it and what disc to use 🙏🏻
@@michelvillarias you can use Boysen Konstruct to have a cement texture look.
what speed do you run the grinder ?
Hello. With the initial cut (cupwheel), we set the speed between 1-2. For the resin pads, we turn 1 incriment per succession of every grit. The last pad (3000 grit), we set our speed at the highest.
What is the blue one in the can
It's TENAX marble glue sir
Do you conduct training/workshop on this?
Hi sir. As of now wala pa po kasi nabusy din kami sa mga projects.
@@cebupolishedconcreteandmor8907 Thanks po for the reply.
hi, what kind of material is this? I also polished concrete for my shower in the apartment in Taguig. but I still need this medium of the video time 7.27min.
I also make videos of how I renovate my apartment with European materials
Hi sir, thank you for the comment. The material you asked is called Tenax. We would love to see your videos as well. Cheers!
One of the best videos I've seen on polishing. How long did the actual polishing take? I would love to get more info on the products you use. Great video.
Thank you so much for the comment 😊. This was done in less than 6 hours, including the waiting time for the patching and the chemical treatments to cure.
This seems to be labour intensive. How long it take to do a standard 3 bedroomed house?
Hi sir. Thank you for the comment. It is labor intensive, and the equipment used to polish floor is also big. A 200 sqm residential project (high gloss), normaly takes 7-10 working days, providing we can run 2 sets of equipment.
What is the sealer called. Cool work
Hi sir, it's called ATS Hydrolock V3. It's our own proprietary product
@@cebupolishedconcreteandmor8907 do you sell it ?
Is this applicable to other stone materials like marble or granite? How about synthetic granites?
Hello maam. Yes this can be applied to natural stones, however, you need a cryatalizer on the final polishing. For synthetic granites, it's exactly the same process but you'll need to use a special bonded pads specifically for synthetics.
Can i use orbital sander instead of grinder?thanks
Hello sir, though for small touch-ups orbital sanders can be used. Unfortunately, it won't work well with concrete polishing, and we recommend to use a variable speed grinder.
Where can I find a number zero sanding pad?
Hello Ma'am. It's our own pads. You can order from us. Please contact us at 09950553334 or 09474475151
Thanks for your effort!
Most welcome sir and thank you for the positive comment
Where to buy how much concrete harderner, & sealer
Hello sir. The chemicals and the resin pads we are using are our proprietory products. You can order it from us. Please contact 09950553334 09474475151
Where can I get these disc for grinding.
Hello Shane, may I know your geographical location? For EU and US, you can order the same discs from HTC or Husqvarna.
@@cebupolishedconcreteandmor8907 I'm in North Alabama, U.S.
@@shanemobley5825 HTC/Husqvarna or Hypergrind is my best recommendation for you at your location
@@cebupolishedconcreteandmor8907 Thanks
we're can we access this am in Zambia
Hello sir. Please DM us in our WhatsApp +639474475151
Great video, can you please share the patching compound brand or specs, thank you.
Hello Benjamin,if you're from the Philippines, hit me a message at 09950553334 or 09474475151 or email us at acerotradingandservices@gmail.com
Nagawa ko din Yan Idol talagng mganda prang granite p shout out
Ayus 'dol. Sige sa susunod na video natin ishout out kita 😊
Whats that on the can?
It's TENAX sir
It's TENAX sir
Could have you just used the Hilti to do all of it? thanks!
It could have been better, but Hilti only has resin pads up to 200 grit sir.
Do you sell pads that will fit the Hilti DG150 grinder? That might be a good market for you to tap into. Thats the expensive grinder I own, but Hilti only allows for the smaller one, as shown in your video to accept polishing pads...thanks@@cebupolishedconcreteandmor8907
Hello, where can I buy Densifier and Hydrolock? Wanted to buy. Also may I know the exact grits of the grinder.
Sir Jovet thank you for the inquiry. I replied to your text, sir, and we're coordinating with the courier for the freight arrangements
First time I saw a polish concrete floor at the vlog of Armstrong family there in the Philippines.Love it😍I want to have my patio done.Madulas po ba? KASI Mababasa PAG u umulan.☮️💟🇵🇭🇺🇸🇨🇱
Thank you po maam sa positive feedback. Actualy madulas po siya kung kayo po ay mag aapply ng topical sealer (clear coating). Kaya nga po ginawa po namin na mag formulate ng mga penetrating treatments to address the question po of polished concrete being slippery. May mga videos po tayo sa channel na to na tinesting po natin kung madulas nga po ba ang gawa natin na high gloss polished concrete 😀 naging test dummies po tayo kasi maraming nagtatanong hehe
Sir ano ung tawag sa pang buffing nyo..after applying lithium densifiers?
Hello sir. Hogs hair or heat pads po ang tawag nyan sa industry sir.
Thank you for this vedeo sir.may mga products or supply for for the grits
Hello sir. Thank you sa comment. Yes sir meron po tayong supply sa chemicals abd the resin pads. Pls contact us at 09950553334 or 09474475151
Can you make a video about polished walls? Thanks
Hello. We'll find a project for this, sir. Thank you for the comment
What's the name of the product
Hello Lexona. Thank you for the inquiry. The patching compound is callex Tenax
Anung gamit nyo n sealer
Hi maam. ATS Hydrolock V3 ang name. It's a proprietory deep penetrating waterproofing grade polished concrete treatment.
Anu tawag lods sa pinangmasilya u sa cracks
Tenax po sir
where can i buy resin pads? im from nueva ecija
Hello sir. You can message us at 09950553334
09474475151
Or at our fb page. Acero Trading and Services
Good day, can I ask for the link of your products ?
Hello sir. Thank you for the inquiry. I responded to your message in whatsapp.
Yes what's the link
HI
WHERE WE GET THIS ATS V3 NANO HYDEOLOCK TRETMENT AND NANO LITHIUM DENSIFIERS IN INDIA WAITING FOR REPLY
Hello sir, our treatments are proprietory and is not available anywhere else. What's the total volume you wish to order? Maybe we can arrange to ship it overseas
Hey man cool vibe you got there. Could you please share the link for the patching compound. Thanks
Thanks for the comment bro. It's a marble glue/patching compound that you can buy at local stone depot.
@@cebupolishedconcreteandmor8907 Hey brother could you please help me with
this one. I pre wet the floor sprayed the grout
and grouted using #120 metal diamonds at
slow speed made it into a slurry left it
overnight and next day unable to fully remove
the grout. There is still plenty of dark patches.
I also tried another way of pre wet and
sprayed grout but this time at 650 rpm(which
is recommended by the equipment's
manufacturer for#120 metal) had to use more
material and the grouting's not proper. What
do you find wrong in my methods/ is there any
other way which you would suggest. Btw the
concrete is soft and very porous and fully
exposed. Thanks
what was the specific model number or name of the Bosch 4in grinder with variable speed?
It's Bosch GWS-900-100S sir
@@cebupolishedconcreteandmor8907 ❤💚
ano naman specific model nung HILTI please?
@@zjterre3215 Hilti DGH 130 po sir
@@cebupolishedconcreteandmor8907 Thank you for the prompt response. All the best on your empire!🙂
Incredible !
Thank you and more power sir
Pwd ba ni nga technology gamiton sa old concrete floors made of granular marbles, kadtong giatawag ug crazy cut?
Yes sir see our latest video where we restored a granuletic terrazzo floor on the link below:
ruclips.net/video/0-sChcTijtg/видео.html
If you need further assistance pls feel free to contact us at 09950553334 09474475151. Nakasulay naman sad tah restore ug terrazzo on a well known church here in Cebu and taga Leyte rapud ko sir 😊.
Where do you buy ATS V3 Hydrolock?
ATS Hydrolock V3 is our own proprietory engineered chemical sir. You can order it from us
I want to know the patch product name?
Hi sir. The brand is Tenax
Pwede to sa countertop
Yes sir pweding pwede
gabo katagal po maubos ung isang 4" resin pad?
Hello sir. There is no definite answer to that as it is subject to concrete quality, the preparation done, and how skillful the user using the grinder or machine. But as per experience it can cover at least 40-100 sqm on a hand held grinder.
What about if you do this to the walls of the house?? Naa mo cebu noh??
Walls can be done if it's precast ma'am. But kung CHB siya dili sya pwede. Yes ma'am Cebu based ta.
NAa mo email to connect? Inquire Para sa floor finished??
hello it's acerotradingandservices@gmail.com
You may also contact us at 09950553334 09474475151
The number 1 concrete polish in philippines jvzco inc..
In terms of operational reach, that is without a doubt po but our processes is a bit different including the chemicals and diamond tooling we use, we manufacture our own. Magkasama lang din kami sa industry and we know each other well and we share the same passion. Kaya nga po the industry flourished.
Where to buy that?
Hello sir. We apologize to have responded late. May we know the total volume po na oorderin nyo?
@@cebupolishedconcreteandmor8907 Just a small pail
How long must you let the concrete cure before you commence polishing?
Hello sir. For normal job mix it takes 4 weeks for the concrete to fully cure. You can start polishing counters in 3 weeks but for concrete floors, we wait until the designed curing time is reached.
@@cebupolishedconcreteandmor8907 wow. 3 weeks? That's a long time. By then, the project would have been long time finished.
Hello Aldean, 3-4 weeks for normal concrete mix. You can design your concrete with admixtures for 14 or 7 days curing time but the cost is a bit higher.
anong brand ng patching compound ginamit nyo?
TENAX po sir
Ano po yung mga gamit nyo na agrgregates?
Hello sir, normal 3/8 aggregates lang po galing sa hardware.
where to buy your products sir?
Hello sir. Which area / country are you based in?
@@cebupolishedconcreteandmor8907 i'm from the Philippines sir. Bicol area.
@@cebupolishedconcreteandmor8907 hello?
Pwedi po ba ito sa mga.lababo?
unsa na nga batak para sa concrete sir. thanks
TENAX ang ngan sir.
Sna tinagalog mu kuya para naman maintindihan ko at magawa ko
Salamat po sa comment. Sa mga susunod na tutorial videos natin sir tatagalogin po namin 😀
San po pwede makabili ng concrete sealer?
Hi sir, salamat sa inquiry. Please call us at 09950553334 or 09474475151
San po maka bili ng densifier?
Hello sir. You can order it from us. Pls contact 09950553334 09474475151
Wanna make my house floor done like this sir... Do u offer services in Iloilo??
Hello Ma'am. Depending on the total floor area, we can mobilize, or we can refer you to a contractor within your location