I must have gotten lucky, my EXO-U doesn't rattle at all when closed and just a little when open. The EXO-M I have is much more rattlier . Pushing down on the blade holding spring with my thumb won't disengage the blade unless I push it to the side, but I also haven't used it in any heavy duty way. Now I'll have to try it to see if it will happen while using it on more then just opening boxes. I do have to agree, it's not really meant to be a heavy user. I wouldn't try to use it to cut carpet or anything like that.
I have the same EXO U and I find it amazing for the lighter to smaller tasks, for tasks that need more umph (but still utility blade) I go for the Tyrant Exceed. Though I got the second gen I find it a really nice titanium body with rlly smooth action, sad to hear you didnt like the Exo U. Solid content and wish you a good day.
Thanks, Dood! I love when people actually use their shit and give honest reviews! I was thinking about picking this up but the spring position makes no sense. I bought the new blacked out Exo with blued titanium inlays and that it fantastic. IDK if it's just in my head but I think the black PVD coating makes it smoother.
Hate to be an absolutist but every utility blade holder needs to be able to handle hard use. That is what they are for, and xacto blades are for light duty or super precise cuts, and you are honest and we appreciate that.
I wondered about that strange spring blade holding design. Seems like they could have utilized a more common system. I carry an olight otacle u1. It’s $25 it has a crossbar lock but with a pretty decent “detent” and uses a small thumb screw to change the blade. The action is very snappy there is zero rattle and it seems pretty tough. Only downside I have is it’s pretty small so for a user like you it may not work I don’t usually need to bare down super hard, but I have a few times and it was fine. Thanks for the honest review!
I love the fidget factor and for what i need a knife for it does everything well, but when its in my pocket it rattles like crazy and it sounds like a maraca in my pocket and it seems to only have gotten worse with use and im planning on retiring it
The way they did the holder is a terrible design honestly. I have the Civivi one and while you do need to take out a torx screw to change out the blade, the blade is rock solid in the hold, there’s no play whatsoever in the pivot and the entire length of the utility blade is exposed for cutting. Overall a much much better design ✌🏻
Ive been following you for a while man! I found you when i was looking at leathermans! I got a wingman as a gift and carry it every day, beat the crap out of it in the shop! And i just got a supertool 300... you should try them out... theyre not crazy expensive... but theyre as tough as they come!
Thank you for this! I always felt like I was the only who thought this would not be a good idea for a utility knife. Although the magnetic issue wouldn’t be a problem in my work setting everything else just seems to be what I wouldn’t want on a utility cutter. I think the one to try out is the Exceed Designs TiRant V3. Full titanium flipper with a pinch mechanism to release the blade so no tools necessary.
Chynah dood…Stay on the track witj USA made - limited production, mid-tech….this is the way. People are sick the internet hocking China budget as: “this MigHt bE tHe BeST bUdGet BaNgARr”…o7
Thanks. You saved me 80 bucks.
I must have gotten lucky, my EXO-U doesn't rattle at all when closed and just a little when open. The EXO-M I have is much more rattlier . Pushing down on the blade holding spring with my thumb won't disengage the blade unless I push it to the side, but I also haven't used it in any heavy duty way. Now I'll have to try it to see if it will happen while using it on more then just opening boxes. I do have to agree, it's not really meant to be a heavy user. I wouldn't try to use it to cut carpet or anything like that.
Hmm that’s weird. Mine is a damn maraca
Great extensive review. I almost bought one to use at work to replace my fastback. That rattle that dulls the blade didnt even cross my mind.
Great unsights thank you
I have the same EXO U and I find it amazing for the lighter to smaller tasks, for tasks that need more umph (but still utility blade) I go for the Tyrant Exceed. Though I got the second gen I find it a really nice titanium body with rlly smooth action, sad to hear you didnt like the Exo U. Solid content and wish you a good day.
Thanks, Dood! I love when people actually use their shit and give honest reviews! I was thinking about picking this up but the spring position makes no sense. I bought the new blacked out Exo with blued titanium inlays and that it fantastic. IDK if it's just in my head but I think the black PVD coating makes it smoother.
Thanks man! You might be right, I could see the coating making everything smoother
I thought it was a gimmicky cash grab and you reassured me thanks 🙏
You were right
@@doodysdaggers the exo m is still one of my favorites tho but I won’t be getting this one brother
If you’re not going to use it would you sell it to me or? Thanks🌟
Sure hit me up on Instagram or email
Hate to be an absolutist but every utility blade holder needs to be able to handle hard use. That is what they are for, and xacto blades are for light duty or super precise cuts, and you are honest and we appreciate that.
A very good point!
Thanks for the vid!
I wondered about that strange spring blade holding design. Seems like they could have utilized a more common system. I carry an olight otacle u1. It’s $25 it has a crossbar lock but with a pretty decent “detent” and uses a small thumb screw to change the blade. The action is very snappy there is zero rattle and it seems pretty tough. Only downside I have is it’s pretty small so for a user like you it may not work I don’t usually need to bare down super hard, but I have a few times and it was fine. Thanks for the honest review!
Good to know, I’ve had a few people recommend that Olight knife. I might have to give it a try
Have you considered the new Civivi Elementum Utility? Pretty much a regular knife shape with a razor blade. Does have a screw to swap blades however.
Yeah the screw was the only thing that turned me off
I love the fidget factor and for what i need a knife for it does everything well, but when its in my pocket it rattles like crazy and it sounds like a maraca in my pocket and it seems to only have gotten worse with use and im planning on retiring it
Haha yeah man it’s soooo rattley
EXO-U, you were the chosen one!! 😭
You were supposed to bring balance to the Force, not leave it in darkness!
@@doodysdaggers 🤣
Just get yourself a Knipex Cutix.
Best utility knife ever made.
All these toy knives are made to appeal the fidget crowed.
What do you think of Pichi Design G9 ?
Never tried it I’ll look it up
Left a like, but I hate the type of knife. You do great reviews, even if I don't like the knife. Thanks
The way they did the holder is a terrible design honestly. I have the Civivi one and while you do need to take out a torx screw to change out the blade, the blade is rock solid in the hold, there’s no play whatsoever in the pivot and the entire length of the utility blade is exposed for cutting. Overall a much much better design ✌🏻
Ive been following you for a while man! I found you when i was looking at leathermans! I got a wingman as a gift and carry it every day, beat the crap out of it in the shop! And i just got a supertool 300... you should try them out... theyre not crazy expensive... but theyre as tough as they come!
Right on man! I’ve always wanted to try a Supertool
Thank you for this! I always felt like I was the only who thought this would not be a good idea for a utility knife. Although the magnetic issue wouldn’t be a problem in my work setting everything else just seems to be what I wouldn’t want on a utility cutter. I think the one to try out is the Exceed Designs TiRant V3. Full titanium flipper with a pinch mechanism to release the blade so no tools necessary.
Yeah me too, that’s most likely the next one ill try, the tirant
No wonder the blade was dull when I flipped it. The rattle dulls the blade :/ thanks
TiRant V3 is my jam, I’m confident you’d dig it!!!! And just for inexpensive fun, throw in the Oknife Otacle U1 ❤️ 🔪
Chynah dood…Stay on the track witj USA made - limited production, mid-tech….this is the way. People are sick the internet hocking China budget as: “this MigHt bE tHe BeST bUdGet BaNgARr”…o7
100%