Sir what you have shown above is perfect but the main flaw in this is you can only 2D program for 4th axis. If you try for 3D model program you wouldn't be able to make. As well as there is also limitation that you cannot make 4th axis Rotate Contineous for 2D program as well. So It is just for Fun . But at real scenario. There is no support. Thanks.
Thanks for the reply! You are correct, and we're happy to say that Autodesk has address some of these limitations in more recent releases. You may enjoy this more recent video on Fusion 360's CAM improvements: ruclips.net/video/_qMbMzeygcY/видео.html
Great video! Did you guys ever had a problem related with different feed rates after being post processed, than what it was programmed? I`m using the same Post-process from HAAS for a 4 Axis job.
Thank you for your question! That toolpath is not available inside of Inventor at the moment. Please share your suggestion on the Ideas forum for HSM. forums.autodesk.com/t5/hsm-ideas/idb-p/231 Alex Alvarez | KETIV Application Engineer
This video helped me tons I haven't ever programmed 4th axis on Inventor but I nailed it with this video as reference.
Glad we could help!
awesome video, it really helped me, thanks!
Sir what you have shown above is perfect but the main flaw in this is you can only 2D program for 4th axis. If you try for 3D model program you wouldn't be able to make. As well as there is also limitation that you cannot make 4th axis Rotate Contineous for 2D program as well. So It is just for Fun . But at real scenario. There is no support.
Thanks.
Thanks for the reply! You are correct, and we're happy to say that Autodesk has address some of these limitations in more recent releases. You may enjoy this more recent video on Fusion 360's CAM improvements: ruclips.net/video/_qMbMzeygcY/видео.html
Great video! Did you guys ever had a problem related with different feed rates after being post processed, than what it was programmed? I`m using the same Post-process from HAAS for a 4 Axis job.
Hi Luis, go ahead and email us at questions@ketiv.com and we can help you out there!
Thanks for the videos you made i want to work on the four-axis PowerMail. Can you make this video ???????
Thanks for the suggestion, we actually have a PowerMill session taking place in just a couple minutes, sign up here to join: ketiv.com/ava
There is a new rotation (4axis) toolpath under multi axis tab in fusion, do you know how i can get that toolpath in inventor?
Thank you for your question! That toolpath is not available inside of Inventor at the moment. Please share your suggestion on the Ideas forum for HSM. forums.autodesk.com/t5/hsm-ideas/idb-p/231 Alex Alvarez | KETIV Application Engineer