I installed this in my suzuki celerio. here's what works : 1. lock and unlock (buttons and touch) 2. Remote unlock (requires OBD chip and works via bluetooth. what id does is that when you go near the car, it unlocks itself and when you leave the bluetooth range, it locks itself). 3. Automatic windows raising. when you stop the car and leave the bluetooth range, if your doors are locked but windows are not rasied, this will automatically raise the window. NOTE : Remote lock / unlock and automatic windows raising comes with a risk. if you have a family member or a pet in your car and you turn off and get out of the car for any reason, the car will lock and raise the window automatically.
Will this work for a 2022 Ford bronco, also my key is 4 buttons , the unlock button also has the function to autostart the car with a double tap. Would I be able to keep the function with this key?
OBD is free gift, It is not necessary, it is used as an auxiliary function to upgrade the PKE comfort entry function, some models are not applicable, you can try to use OBD to see if it is suitable. Then decide whether to use it or not.😁
OBD connector is for the cars that does not have all the functions in the smart key. my car does not have automatic windows raising function. But with the OBD connected, those functions works with my car too.
This wiring is for CF Series. I not sure if it is same as x500's what you said. But this is just a method, you can solder according to the wiring harness in the manual.😀
The power line needs to find the positive and negative poles for welding. The function lines, function keys have four corners. You can choose diagonal welding at will. The same side will cause a short circuit.
I have everything done. All works except for the convenience entrance . I dont know how to connect the obd with the hub? It is suppose to get connected automaticly? Please help
@@luismontano2532 After plugging in the OBD, first confirm that the Bluetooth display in the upper left corner of the LCD Car Key is connected normally. If it is normal, the second step is to confirm whether the comfortable entry function is enabled in the system. If it is still not, it may be because the OBD program is not suitable. due to not equipped with all models, or your OBD programming has been changed before.
@@CARQSENG thanks. I think something is wrong because in the uper left of the screen noting appears until i enable the confort entry access. The a logo appears with an x
@@Philippes_Blueprint Our vertical space is sufficient, as long as your length and width can be match. In addition, we have built-in sponge is used to prevent the button from triggering, you can rest assured.
Yes. The discharge will be faster than the original one, but the built-in rechargeable battery will have a much larger capacity than the original one. Even if the battery power is not enough for the display, you can still use the physical buttons to control the vehicle, avoiding the lack of power to control the vehicle.
This so-called smart key fob only works on vehicles w/push start button, so in other words if you have to insert your key to turn your vehicle on this fob will not for work you.
You have been know about such products before, right？In fact, as long as you have a car remotes, you can use it. It's just that the functions are not so complete. All in all, this smart key is only an upgrade in appearance, not a functional upgrade. If you need a functional upgrade, our company has a supporting system that can help you achieve it. Welcome to consult.
I have one question. after all the sewing and everything done on the key, does it need any other sort of set-up for it to work entirely? I have an BMW F30 (Start/stop button) and want to upgrade the classic key to an LCD one, but don't know if it needs any other kind of programming afterwards.
Hello. And what is the algorithm for comfortable access? If the connection with the OBD module is broken when moving away from the car, does the button to close the car work? I understand correctly?
sorry for late response, Comfort Entry is when you closely the car, the door will automatic unlock, when you walk away the car, it will automatic lock the door, if OBD is broken is only defect the comfort entry function, no matter the button swich lock.
If you use our one-button start system, even if you do not use OBD, you can still have the comfort entry function, and you can remotely start the engine through the LCD key.
this LCD key main function is appearance upgrade, It will inherit all the functions of your original car remote control. If you want to achieve the function of comfortable entry, the OBD we match needs to be adapted to your car model. Currently, it is suitable for some models.
Double the size and quadruple the complexity of your car key in just 3 hours and for the low cost of just 300 dollars. Please make a way to turn my car key into a basketball next time
OK, dope...... one problem....... this only shows 4 key functionality......... my car has 5 keys (2011 Camaro SS) (Lock, Unlock, Trunk, Remote Start, Panic)
You can add my Wechat +86-18926027320 so you can send me your remote control style and check whether it can be installed because it is also necessary to consider the size of the remote control board.
I installed this in my suzuki celerio. here's what works :
1. lock and unlock (buttons and touch)
2. Remote unlock (requires OBD chip and works via bluetooth. what id does is that when you go near the car, it unlocks itself and when you leave the bluetooth range, it locks itself).
3. Automatic windows raising. when you stop the car and leave the bluetooth range, if your doors are locked but windows are not rasied, this will automatically raise the window.
NOTE : Remote lock / unlock and automatic windows raising comes with a risk. if you have a family member or a pet in your car and you turn off and get out of the car for any reason, the car will lock and raise the window automatically.
Yes..Completely correct
Will this work for a 2022 Ford bronco, also my key is 4 buttons , the unlock button also has the function to autostart the car with a double tap. Would I be able to keep the function with this key?
Yes, sure you can keep your all function.
Hello I just want to know if the red and black wire that's connected to where the battery is supposed to be is the function to remote start the car?
no, need to wire other wires. if you remotes only 3 buttons, you can wire 3. if you got 4, you can wire 4.
Great work I got one with an obd is the obd connector necessary to use ?
OBD is free gift, It is not necessary, it is used as an auxiliary function to upgrade the PKE comfort entry function, some models are not applicable, you can try to use OBD to see if it is suitable. Then decide whether to use it or not.😁
OBD connector is for the cars that does not have all the functions in the smart key. my car does not have automatic windows raising function. But with the OBD connected, those functions works with my car too.
Does it matter which diagonal connections you use? Does it matter if you use upper left and bottom right? Upper right, bottom left?
It matters, because only diagonal lines are not connected in series. The off-diagonal lines are connected in series, will short-circuit.
@@CARQSENG So would I use the upper left and bottom right diagonals for each button or the upper right and lower left diagonals?
@@gtrscort1 All can.
what is a tail box?
can I use this wire for alarm instead? planning to use this on my e-motorcycle key fob.
From my understanding you can wire the Alarm button to any unused connection. It’s fairly plug and play other than that
tail box is for car. If your motorcycle has a PCB board, you can install it.
Can I use the chip from my after market remote starter compustar and does it need a obd2 plug in
Did you install the remote engine start system aftermarket?
Yes you can used it and no need the abd if you are aftermarket. 😁
@@CARQSENG yes it's after market 2 way renote
Is this the same wiring harness on all aftermarket x500’s?
This wiring is for CF Series. I not sure if it is same as x500's what you said. But this is just a method, you can solder according to the wiring harness in the manual.😀
Ciao, ottimo video, una domanda... ma per chi possiede la chiave fisica e non keyless va bene lo stesso? Che alternative ci sono? Grazie
We got push start system can upgrade the original car. and make it remote control the car by new remotes. and you can upgrade to the LCD Car Key.
The wires can be in soldering in any position? I mean th only one to be positive and negative are the power wires?
The power line needs to find the positive and negative poles for welding. The function lines, function keys have four corners. You can choose diagonal welding at will. The same side will cause a short circuit.
Thanks
I have everything done. All works except for the convenience entrance . I dont know how to connect the obd with the hub? It is suppose to get connected automaticly? Please help
@@luismontano2532 After plugging in the OBD, first confirm that the Bluetooth display in the upper left corner of the LCD Car Key is connected normally. If it is normal, the second step is to confirm whether the comfortable entry function is enabled in the system. If it is still not, it may be because the OBD program is not suitable. due to not equipped with all models, or your OBD programming has been changed before.
@@CARQSENG thanks. I think something is wrong because in the uper left of the screen noting appears until i enable the confort entry access. The a logo appears with an x
Would be better to unsolder the buttons to prevent accidental press against the cover..
Sorry, what buttons?
@@CARQSENG the original buttons i still connected to the circuit board. this can cause random clicks if its tight.
@@Philippes_Blueprint Our vertical space is sufficient, as long as your length and width can be match. In addition, we have built-in sponge is used to prevent the button from triggering, you can rest assured.
How long the battery last, I think it discharge faster because of lcd screen than in conventional key?
Yes. The discharge will be faster than the original one, but the built-in rechargeable battery will have a much larger capacity than the original one. Even if the battery power is not enough for the display, you can still use the physical buttons to control the vehicle, avoiding the lack of power to control the vehicle.
This so-called smart key fob only works on vehicles w/push start button, so in other words if you have to insert your key to turn your vehicle on this fob will not for work you.
You have been know about such products before, right？In fact, as long as you have a car remotes, you can use it. It's just that the functions are not so complete. All in all, this smart key is only an upgrade in appearance, not a functional upgrade. If you need a functional upgrade, our company has a supporting system that can help you achieve it. Welcome to consult.
I have one question. after all the sewing and everything done on the key, does it need any other sort of set-up for it to work entirely? I have an BMW F30 (Start/stop button) and want to upgrade the classic key to an LCD one, but don't know if it needs any other kind of programming afterwards.
At this time, maybe I would recommend you to use our PKE Remote Engine Start System.😀
@@alexcrl00 Our connection is controlled by OBD BT connection. plug in the OBD is ok.
ummm obviously. do you see a physical key on this thing? neither does anyone else.
Hello. And what is the algorithm for comfortable access? If the connection with the OBD module is broken when moving away from the car, does the button to close the car work? I understand correctly?
sorry for late response, Comfort Entry is when you closely the car, the door will automatic unlock, when you walk away the car, it will automatic lock the door, if OBD is broken is only defect the comfort entry function, no matter the button swich lock.
If you use our one-button start system, even if you do not use OBD, you can still have the comfort entry function, and you can remotely start the engine through the LCD key.
@@CARQSENG Hello. What price?
@@user-ut7fc9hz4c WhatsApp +86-18926027320
Smart Key , Great Key
Thank you！
Good morning,
For this to work, the car must be original already "hands-free" and it must open when you approach???
this LCD key main function is appearance upgrade, It will inherit all the functions of your original car remote control. If you want to achieve the function of comfortable entry, the OBD we match needs to be adapted to your car model. Currently, it is suitable for some models.
How long will the battery last.
Danke
3-5 Days, It depends on how you use it.
Does this work on a 2017 Hyundai Santa fe sport
WhatsApp 86-18926027320
What's the point of the LCD screen if the hard buttons does the same things?
LCD screen need setting other function, like keyless entry and window lift set.
Looking to do a review on this product. Send me the link to purchase
WeChat/WhatsApp：+86 18926027320
I need the technical specification of this device - what is the processor, LCD etc. I want to create my own software.
we are connected before.
?
@@karolsojka2567 😂
@@zYxMa ?
Could i get a huge stock of this product imported to india I would like start a bussiness?
We can chat with WhatsApp: +86-18926027320
Irshad bhai jab business start kare aap to aapke paas pehla customer ready hai.
@@CARQSENG i will contact you on what’sapp soon.
Can I use it to unlock abs lock my doors and open trunk
It can do anything the original remote can do. But if the original remote can't do it, it can't either.
Is there a way to make it a key chain
WhatsApp/WeChat : 86-18926027320
como puedo comprar uno pero que ustedes lo configuren?.
WhatsApp
+86-18926027320
Can I used it just to unlock and lock my door
Yes, sure you can!!
will it still work if you dont charge ?
When the battery is low, the LCD screen cannot be used, but the physical buttons can still be used.
does it work on motorbike?
can fit all remotes, if you can uesd the remotes to control, LCD car key is for appearance upgraded, so what you can use originally, what will it use.
Are you guys in the usa
No sir, we in China. sorry
Everything seems to work but screen keeps freezing any ideas please
whatsapp : 86-18926027320
Does it work with Fiat Grande Punto from 2007 199 Dynamic
What kind of remotes you original own？
Double the size and quadruple the complexity of your car key in just 3 hours and for the low cost of just 300 dollars. Please make a way to turn my car key into a basketball next time
We also can upgrade to no need car key, only your phone. APP Control by Bluetooth.☺
How do I get this product
WeChat/WhatsApp：+86 18926027320
And shop?
Yes, we have AliExpress, Alibaba, etc.
OK, dope...... one problem....... this only shows 4 key functionality......... my car has 5 keys (2011 Camaro SS) (Lock, Unlock, Trunk, Remote Start, Panic)
if 5, you only can use 4 of them... you need make a choice.😅
You can add my Wechat +86-18926027320 so you can send me your remote control style and check whether it can be installed because it is also necessary to consider the size of the remote control board.
Contact details
Whatsapp/ WeChat 86-18926027320
How mutch?
WhatsApp: +86-18926027320
Can you find my ID?