i have a hardline build in the dynamic mini, in order to get the rad and fans at the top you have to use an itx mother board, then lower the motherboard tray down and install the included block off plate above it (i believe the full size version has that space at the top by default). Either way, awesome build! love your content!
LiAN Li's manual explains all this and if you just review the info from their web page the info is there as well, so this just goes to show he did not RTFM before beginning the build.
@@DesignsByIFR late to the party, but Lian Li also offers offset mount brackets that move the top radiator closer to the glass side panel, in most cases that solves RAM clearance issues, but the Dominator Platinum are very tall, so not sure if the offset would have been enough.
@@DesignsByIFR either way i think it looks WAY NICER with the pipes going downwards. this build caught my eye almost instantly because of them. well done :)
Absolutely fantastic build mate. I seriously love the stealth theme. Your videos and all of your builds keep getting better. The custom fluid is sick as well.
Wow, an all black CPU is quite the looker, RGB lights are cool and all, but an all black build really brings out a professional look. I call this a victory. Great build! :D
Absolutely stunning build. Damn. I really liked that cooling fluid. For the next build, can you build a system using the inWin 928 case and have it themed to any apex machine in horizon forbidden west. One with purple fluid/lighting and black/red/orange sleeves while also using the extreme glacial z690 from asus rog. I hope this gets a lot of thumbs up so that Corey can see. Thanks again for this very cool vid, keep up the good work! You keep me relaxed when stressed and also inspired to build my own system.
actually you can use both rad. By using itx mobo, just drop it down to configuration 5. cleaner. then you should be able to mount 360 rads on top. ive used atx motherboard with 360mm ryujin on top. just need to mod with spacer.
You could adjust the layout of the back to 5 slot or 3 slot mode for mATX and ITX builds so that you could put in the 360mm rad at the top and the bottom.
Have any in ur experience xfx power supplies due out? Any xfx graphics card I purchased in past never lasted past a year. What was xfx original first product? Mb they should stick to it and get it right...
You can actually fit 2 360 radiators on the O11 mini if you choose to reconfigure the left side of the case. thats the purpose of all the screws you see on the side. hope this helps!!
I'm sure you know your stuff, so correct me if I'm wrong. But couldn't you have moved the motherboard down a few slots in order to fit the rad + fans up top? The o11 mini supports 3 different back panel configs if I'm not mistaken. A super clean looking build none the less!
Awesome! Liquid magic. Do you sell this coolant liquid or have instructions to share on how to achieve the metallic, silver liquid effect? Nu black polished chrome, came over the sky like liquid night.
@@DesignsByIFR Bro it's literally on the side of the PC case box. Also there's a small box on top of the case when you first unbox it where everything is included. It clearly isn't Lian Li's fault, it was an oversight on your part
I have the 011 mini with a ATX motherboard, the EK front distro plate, EK 240SE Rad on rear wall & dual XSPC TX360 rads (top/bottom). I purchased a 3D printed offset bracket from Etsy for the top to make the 360 rad/fan combo fit.
Dam I wish I had that PC I’ve just got Windows 7 sweet build good video The only thing I would change is make it Colour instead of just white LEDs Such a beautiful PCs
Wrong. To get the rad up top you have to move some of the back plates around. Then you can put in the two 360 rads. You could have gotten there easily, but nice build overall.
Another great build, looks great. Question: Don't the flake coolants look better with the pump rpm turned down? Personally I think it looses the magic of the flake appearance when the pump is moving the fluid at that rate
Tbh msi unify itx is great z690 itx because wide cooler compability, ssd nvme storage itself is a lot 3 slot for itx mb and lastly very beefy power delivery
Q: Why did the computer show up at work late?
A: It had a hard drive.
funny
pls no
Lol bad joke ._.
XD
Im stealing that one!
@@apollogenerator9837 AYO HELL
I just think its a crime that such a beautiful build has the most underwhelming graphics card 😢
absolutely it looks to Tiny
But the whole idea is to show that their are cheaper smaller options. GPUs are getting too big
@@DesignsByIFR bro it’s a rtx 3060 with one cooling fan💀 shits gonna change the theme to fire when u boot up RDR2 on low graphics🤣
@@creed3173 hahahahaha, xD
@@DesignsByIFR I’m just kidding man, great build. My comment was pointless when I realized how small the case was🤣
Please do a video on how to make that coolant! It’s absolutely beautiful!
Sure!
This build, is absolutely drop-dead gorgeous...
i have a hardline build in the dynamic mini, in order to get the rad and fans at the top you have to use an itx mother board, then lower the motherboard tray down and install the included block off plate above it (i believe the full size version has that space at the top by default). Either way, awesome build! love your content!
thanks for the feedback!
@@DesignsByIFR sometime gotta read those manuals lol
LiAN Li's manual explains all this and if you just review the info from their web page the info is there as well, so this just goes to show he did not RTFM before beginning the build.
I love high contrast builds, and really chill color theme builds. Great Job!! =) Thanks for all the cool content. =)
Thank you ♡
Very nice build once more!
I think you could use the 360mm radiator on the top if you installed the motherboard by using the itx mode of this case.
yeah iv since learned that
@@DesignsByIFR late to the party, but Lian Li also offers offset mount brackets that move the top radiator closer to the glass side panel, in most cases that solves RAM clearance issues, but the Dominator Platinum are very tall, so not sure if the offset would have been enough.
me too
@@DesignsByIFR either way i think it looks WAY NICER with the pipes going downwards. this build caught my eye almost instantly because of them. well done :)
Absolutely fantastic build mate. I seriously love the stealth theme. Your videos and all of your builds keep getting better. The custom fluid is sick as well.
Thank you!
@@DesignsByIFR you’re welcome mate.
An exquisite blend of stealth and luminescence. Batman would be proud.
Haha thanks
Wow, an all black CPU is quite the looker, RGB lights are cool and all, but an all black build really brings out a professional look. I call this a victory. Great build! :D
Thanks!
Absolutely stunning build. Damn. I really liked that cooling fluid. For the next build, can you build a system using the inWin 928 case and have it themed to any apex machine in horizon forbidden west. One with purple fluid/lighting and black/red/orange sleeves while also using the extreme glacial z690 from asus rog. I hope this gets a lot of thumbs up so that Corey can see. Thanks again for this very cool vid, keep up the good work! You keep me relaxed when stressed and also inspired to build my own system.
Thank you man! I may not be able to get that case but we will see
actually you can use both rad. By using itx mobo, just drop it down to configuration 5. cleaner. then you should be able to mount 360 rads on top.
ive used atx motherboard with 360mm ryujin on top. just need to mod with spacer.
Yeah i have since learned that, thank you for the feedback! Happy i can get more cooling into it, i am looking to build the office PC into this case
I love this build so much because of the white lighting and black components, another great build, well done.
Thanks
the custom liquid looks absolutely sick
Thank you
Awesome vid! 👏
Thanks!
Stealthy! Those final pans were fantastic, great job bro :)
Thanks!
You could adjust the layout of the back to 5 slot or 3 slot mode for mATX and ITX builds so that you could put in the 360mm rad at the top and the bottom.
Beautiful build! Love the custom color on the coolant!
Thanks!
Great too see the build, my dream PC! like always great video Corey and sorry for not being that active much got a whole load of work.
Good to see you mate
Loving the coolant, looks amazing. Hopefully, it will get to the point where we can use it day to day
Thank you
LOVE YOU PC BRO
♡♡♡
I loves the cutting disc when the RAM would allow for the Radiator install.
Beautiful build!!
Thank you!
That’s a sweet build. Absolutely love the look and theme.
Thanks!
This build is sick! I especially love the liquid
Thank you
@@DesignsByIFR who makes that cooling liquid?
@@Mr.Orange247 i made it
@@Mr.Orange247 don't use it. it falls apart in 2 days tons of complaints, mine even last 2 days stopped the whole system up. that's primochill.
@@mrrod3004 thanks for the heads up.
Water cooling super perfect
Thanks
What if the cooling pipes were also RGB?
This pc was too beautiful, congratulations on the work
This is the best channel of pc i hope kip going 🤩🤩🤩
Note : can you do built pc(intel i5) and tested
Thanks!
Have any in ur experience xfx power supplies due out?
Any xfx graphics card I purchased in past never lasted past a year.
What was xfx original first product? Mb they should stick to it and get it right...
I havnt had any issues
**Pulls sunglasses down slowly in awe** .........It's beautiful🖤🖤🖤🖤🖤🖤🖤🖤🖤
Thanks
When I'll get the money, I'll pay you to make me the same pc but with the RTX 3080
To be honest, this is the BEST looking pc I've ever seen in my life
Cant you move the motherboard down in that case?
yeah apparently so iv learned
What an amazing build. Really love that stealthy look. ❤️❤️❤️
Thanks
Thank you for make my day
♡♡
You can actually fit 2 360 radiators on the O11 mini if you choose to reconfigure the left side of the case. thats the purpose of all the screws you see on the side. hope this helps!!
I'm sure you know your stuff, so correct me if I'm wrong. But couldn't you have moved the motherboard down a few slots in order to fit the rad + fans up top? The o11 mini supports 3 different back panel configs if I'm not mistaken. A super clean looking build none the less!
yeah i believe so, i havnt delt with this case and was rushed to get it done so i didnt do my proper research well enough
This setup is so clean
Thank you
you guys completely dissapeared from my feed for almost 6 month even though I'm both subscribed and have that bell ticked!
Wait thats so weird =0
RUclips doing youtube things..
Black is always elegant
♡
so if it wasnt an open case then that radiator at the bottom would be getting hot air blown through it right?
yeah but you would switch the fan orientation
@Designs By IFR why you don´t change the Position off the Motherboard you can fix easy two 360 Radiator in this Case
Yeah i didnt know at the time
@@DesignsByIFR For real ok
aren't you able to move the motherboard down? i'm fairly certain you can adjust it.
Yeah i have since learned that
Very professional, well done!
What was that cutting machine that was flaming up?
Laser cutter
Gorgeous Build, sir.
Superb looking build Corey.
Thanks!
Fantastic build once again! Is it possible to buy your custom black liquid in the future....?
Its show build fluid, not a long term use
@@DesignsByIFR ok cool. When are you gonna make and sell your own IFR liquid tho lol.
Once again what an awesome job!! Great work MSI RULES!!!!!
Ayyyy!
Another beautiful build...
Thanks again!
Cory when are you going to build a cool workspace background in your new place like you had in your old one?
the workshop is currently being built
just one question: the fans that put the air in the case where are they? since everyone is taking the air out
just amazing, one of the best.
Thanks
This looks so clean, I love it!
Awesome! Liquid magic. Do you sell this coolant liquid or have instructions to share on how to achieve the metallic, silver liquid effect? Nu black polished chrome, came over the sky like liquid night.
Very cool PC!! And yes of course I'm jealous xd. Well keep up the good work as usual
Thanks!
What do you do with all these builds? I really like this one. Can I purchase?
Lovin the theme already! With the itx build like this! Wow! Its super cool! 😎🔥👍🏻
Isnt that case modular? Where u can adjust the position of the mobo? Therefor u can fit the rad at top… not sure if that’s the same case 😀
Probably haha i didnt really look into that but lian li did specify on their site only 25mm clearance so no idea
@@DesignsByIFR Bro it's literally on the side of the PC case box. Also there's a small box on top of the case when you first unbox it where everything is included. It clearly isn't Lian Li's fault, it was an oversight on your part
the blacked out just needs me to say noice
♡♡♡
Looks sick!
Thanks
This, this is beautiful, certainly a successful stealth build, lovely!
Thank you
Does that type of coolant gunk up the pump. I was thinking about putting that in my loop for people say they had issues with it
i have the same case with a 360 rad up top Lian Li Sell an 20mm off Set bracket that allow a 360 rad to fit definitely Worth getting
yes those would have been handy
I love your vids! keep up the good work!
Thanks!
Fluid type? Great build mate!
I made it
Absolutely gorgeous!!!
Black is beautiful
♡♡♡
best looking pc to date I love it
Thanks
should also start doing budget builds
Yes, we definately want to
That pc looks beautiful!
♡♡♡
I need to know where I can get black fluid! I've looked everywhere to no avail
DAMNNN THIS LOOKS SICKK!!! I'll definitely use this accent in my future build!!!
Thanks!
Also a sick looking build!!!
Thanks!
Very pretty build
Thanks
Great build.. but what do you do about them later?? Any giveaway?? Would like to participate if possible.
Thank you, for your content and that Rig is SICK!!!
that liquid looks sick
Thank you
Love your builds!
Thank you
I love builds like this! I might go for something similar in the future.
♡♡
Can you show how to install the cab ???
Cab??
@@DesignsByIFR sr my english not good. I mean cable pc
I have the 011 mini with a ATX motherboard, the EK front distro plate, EK 240SE Rad on rear wall & dual XSPC TX360 rads (top/bottom). I purchased a 3D printed offset bracket from Etsy for the top to make the 360 rad/fan combo fit.
Very nice!
Great build....loving the all black look
Isnt that coolant the kind that gunks up your fins in the cpu block?
Dam I wish I had that PC I’ve just got Windows 7 sweet build good video The only thing I would change is make it Colour instead of just white LEDs Such a beautiful PCs
Thanks!
looks class. compact and not to blingy
Wrong. To get the rad up top you have to move some of the back plates around. Then you can put in the two 360 rads. You could have gotten there easily, but nice build overall.
Yeah i have since learned that, glad i can fit more in becquse i might use this case as an office pc
Another great build, looks great. Question:
Don't the flake coolants look better with the pump rpm turned down?
Personally I think it looses the magic of the flake appearance when the pump is moving the fluid at that rate
I guess its all personal preference
@@DesignsByIFR totally agree, still doesn't take away from the build
looks pretty darn slick.
Hehe thanks! Glad you like it! :)
You could of used the offset brackets that Lian Li offers for the higher profile ram
Unfortunately i dont have any
@@DesignsByIFR You know now for next time you want to run 2 360mm rads in the mini
Nice built
Tyty
How was the MSI sticker made, can I purchase one?
bang-i loves u
you can lower the mounting point of the motherboard, especially with itx.
Looks awesome :) definitely need to get the sharpie and black out that GPU pcb edge.
Yeah true!
Just a fast tip ur background is a little bit to dark maybe add some lad´s
Love ur vids keep on going!!!!!
Thanks! It is temporary just until the workshop is complete
AMAZING BUILD
amazing work my dude, congrats
@DesignsByIFR_ obvious fake go delete your account
May I know can you custom make the case?
I can make a case
@@DesignsByIFR how can I order?
Small-FF is getting big again. Lessgo!!!
Hahaa
Nice build. Had an corsair xr 7 360 at the top in this case with an gigabyte x570s master. I used the lian li o11 mini air bracket.
Very nice!
Tbh msi unify itx is great z690 itx because wide cooler compability, ssd nvme storage itself is a lot 3 slot for itx mb and lastly very beefy power delivery
Yes sir!