Hey Guys, I am in Alaska at the moment and just found a bit of internet to post a comment. There is a lot of discussion below about natural light. YES! I know. I actually had this as part of the video, but on the cutting room floor, is where it ended up! So, that said, many of you who mention that natural light is best, are right (sometimes). HOWEVER, if you watch the video on STUDIO SET UP you will see that like many others, I cannot control where the windows go in the studio, and I am not in a position to build a studio to my design, yet. Many of us have the studio we're given, either in our rentals, the spare room, or a kitchen bench. So how then do you deal with the shifting light through the day? I have found myself working until dawn on several projects throughout my career. The light shifts all over the place, depending on the time of day. One of the most important considerations is consistency, and it should have been in the video. Daylight is inconsistent, even when you have open shade. So, here in this video, are some ways that we can achieve consistent light. The first thing I do is block up the windows when I have a new space and set up the lighting rigs you see here. That way, it doesn't matter if I paint at 2pm or 2am, the painting appears the same. Now, a HUGE thank you to everyone who brought up CRI (Colour Rendering Index). I need to go back and study, as I was not aware of this factor. I will make an update to this video in the near future! Thanks for all the comments guys! Alaska is beautiful! XD
Great... Here is the real secret.... CRI Ra (8 colors) NOT GOOOOD. CRI Re (15 Colors) Oh Yes!!! ... and the most important is to Check the R12 (blue) and R9 (red) capability reproductions of your light source . Whith Love.
The desk lamps with 5K bulbs are a real winner. I use them on almost any size works. it's important to consider phase cancellation effects in intensity when adjusting the lamps at varying angles, these effects can affect hue on the reflected surface. Thanks for sharing your " Dark Days" with us Andrew.
Hey, I actually do commercial lighting "design" for a living. It is very interesting to hear how an Artist's lighting affects his or her trade. Two things worth noting that Tischler touched on. CCT, or Correlated Color Temperature, is how the color of light appears. This typically ranges from 2700K (Close to sunset orange) to 5000K (White with a tinge of blue). 4000K I would consider a neutral white, but I prefer to use 3500K in buildings. The thing that Tischler is missing is CRI, or Color Rendering Index (measured from 0-100). This compares a select spectrum of colors against how they would appear under normal daylight conditions. The higher CRI, the more colors will resemble how they would look under daylight. 90+ CRI light sources do come with a cost increase, but if you are serious about painting, it is worth it. As for dealing with glare, the larger, more diffuse the source, the better. Like Tischler's janky Flourescent T8 sliding track covered in foil.
Thanks Jetproof! I truly appreciate the expertise! I paint with what was working for me and cheap, based on what I could achieve within my means and limited understanding, but you have inspired me to dive deeper into research! I agree, if you are serious about painting, it's worth it. :)
Awesome topic and conversation! When I did my first art studio, it had 10 well-placed fluorescent fixtures, each with two tubes. I was lucky or smart enough to go to the "special" lighting place where a person like Jetpoof consulted me, all the while knowing past trials covered by the incidences Andrew covered here. The salesman informed me this would be $20 a bulb, plus tax for my lights (costly when I was doing full reno on an entire building) which were probably 4000K. $500 bucks later and I had awesome color, and the shocking thing was that many students said they loved the lighting and it was often said that they "didn't get a headache", apparently cheap fluorescents do that or at least it's "a thing". I also love the minimalist features covered here like the "hairpin" lights in cool and warm, hats off, my friend!
Thank you so much for the additional info! I am about to find what works the best for me for my art and this first video I watched + your comment just made it!
Good video. As an aside, I wear blue shirts or jackets when plein air painting. Learned this from Monet and the boys. The cool light reflection allows you to paint brighter colors.
So that's why those paintings seem different. I always wondered why. Now I know its the light. I never knew light has so much impact on the end result of a painting. This is one of your best video's Andrew. Thank you very much for the tips.
GOSH Andrew, I watched almost the whole series this evening and oh boy have I learnt a lot from You!! Very informative and a pleasure to listen to you. I truly enjoyed every minute of this series. My deepest thanks and appreciation once again, this was exceptional!! I could see your heart and soul in every brushstoke!! All the Best.
I have looked at several RUclips videos and yours was the only one that truly helped me! Thank you for your expertise, Andrew Tischler! I also prefer the light coming from high above so as not to create shadows. I am building a studio upstairs....but for now...Since I tend to move around, I purchased a 7 ft. Daylight U31375 Art Studio Lamp & Stand. It's wonderful and being that I like instant gratification...ha...Amazon got it here in 2 days.
You have no idea how helpful this video is to me! I was about to spent about 700 doller on a pro filming light from aperture, but seeing that i could spent that money on other stuff like painting equipment. Your ideas will definetly come in handy, when im going to finish my studio decor! 😃
Hi Andrew, I'm just starting out doing charcoal on brown board. I found your clip very enlightening, no pun intended, and must say that even when doing charcoal the intensity of the blacks and grays are hugely affected by light intensity. I am already toying with the idea of blacking out the windows of my studio/study at home so as to make the best of stable lighting. Thank you for an awesome insight into lighting!!
For the best colors representation, always use light source which is rated between 5000K~5500K and above 90CRI (Color Rendering Index). Here CRI is a magic potion :) and to eliminate the distance issue, buy lights with dimmer options.
Very useful tips! I found mixing warm & cool lights works well, and I checked my balance with something called a Kodak Color viewing Light Selector. It was a photographic trade tool that shows if your light is balanced or not with a couple of color patches that turn dark or light if it is not balanced, which shows that they match when balanced. I tried to google it but came up empty. Mine is very old but still works. It states: " If the patches appear the same color the light source is equivalent to a 5000K source with adequate amounts of red, green and blue light which result in a high Color Rendering Index." Kodak, 1987 P3-180. The photographic and printing trades used these all the time for color balanced prints (and all color printing is based on CYMK). If you use the photographic color wheel your color mixes might be better if you have trouble mixing colors. Looking forward to your next video- many helpful tips to thank you for! I'm a huge fan!
Another great video, thank you, Andrew. I learned my lesson once by staining a cabinet outside in the bright sun. When I brought the cabinet inside, it was way too dark. That was my Ah-ha moment. Now, I did change the lighting in my studio but your explanation of how different lights affect your work will greatly help my future projects.
Thanks ... for sharing ...lighting is so important... I like your idea of having your lighting slightly dimmer on your canvas, so in average lighting conditions your painting is vibrant... wish I had your work ethic too :)
Great stuff, Andrew! And as pointed out earlier in these comments, the CRI of the bulbs should be a very important consideration as well. Color Rendering Index is listed for most bulbs on the packaging and is the measure of the bulb's ability to throw a full spectrum of light across the work. It is *separate* and apart from the listed 'temperature' of the bulb. Temperature is the bias, or warm/cool cast, we see. CRI is the actual true "quality" (accuracy) of the emitted light. CRIs of 92 or above are recommended by those who know lighting. And while "Daylight" and "Full Spectrum" are ad copy selling points, CRI is the actual true measure of a bulb's quality - and Temperature, e.g., 5000K, is the warm/cool cast of the light. I concur with Andrew's brilliant suggestion to deliberately tend studio lighting a wee bit lower and cooler than "perfect." This will generally tend to slightly 'brighten' and 'warm' a painting in future 'normal' lighting. Too many posts on this topic say we should have PERFECT lighting in our studios. And others paint with poor lighting saying that's how most homes are. Andrew's point is that illumination, distance, glare, and temperature should be set to accomplish the best work possible while making sure to avoid preventable and glaring errors like "the blues" or "dark and moody" ... when neither was the artist's intention! That said - I've exhibited in shows that, and I know collector's homes, have widely varying lighting. We cannot account for every situation with our studio lighting, but we can plan for "preferred" lighting as Andrew suggests.
I have found using daylight is best for me, when it's a nice bright day witch is not very often living in England. But at night I just use the lights in the room, I didn't realise how much it can effect a paintings look.
Thank you very much for this valuable information. You just solved alot of problems for me . I went through the dark painting episode too from having a to bright of a bulb.
I've had this challenge for a while, I've been working with diffused natural light from a window (which seems cool) and an over the shoulder lamp with a warm bulb of 3500.....My issue is I need to move away from the wall so I can step back from my work (and have a little room) but my lighting will suffer! I can now see some more solutions to my dilemma, Thank You! Your work is amazing, please keep the videos coming!;*)
Andrew, you have some pros commenting but as a video professional and someone who adjusts lights often to 'repair' ugly, I would like to suggest something to those artists looking for the right lighting. Though your 5k solution is sound, I would need to tell you something important about fluorescents. GREEN. Those lights pulse beyond the range of human sight but pulse they do. And they pulse a green flash of sorts in between. That may 'subconsciously' affect your painting. To balance any fluorescent tube light, use TOUGH SPUN GREEN or TUFF GREEN or WINDOW GREEN over the light (a very cheap filter plastic which will not melt) so make your white light perfectly balanced. The "window green," (or "plus green") gel converts the light from a flash to nominally match that of a fluorescent light without the green amplitude and matches it to what is referred to as Tungsten. By my interpretation, all the masters of the past used the ole big yellow ball in the sky, which to our eyes is actually quite warm, even with a blue sky. Using Plus Green will render artificial light without the green in it that makes us all look a little sickly. Think the reality that Neo had to deal with before he was 'The One' in The Matrix. That's fluorescents without any correction. there are clean incandescent bulbs you can buy already balanced for just that light. And TOUGH SPUN or a diffusion paper or filter over a desk lamp will soften that light. And finally, there are super duper cheapo light kits available on Amazon which are pretty amazing for next to nothing by comparison to actual studio lights. These knockoff kits come with decent bulbs stands, and umbrellas. They are 'modeling' lights for photographers but they will cast very pretty CLEAN light. If you wanted something that truly did not bend your eyesight toward cool or warm or what have you, CLEAN TUNGSTEN is the way to go...That or open a window and step back a bit until you have a balance between the warm outside and the ambient albedo of the cooler light temps inside. Face your canvass to your window with your back to the window and as long as its sunny and the same time of day, you have it. That's pretty cheap too.
Hey DAVAD M DAVAD I hear you, and thanks for the comment. I think that there is a bit more research to be done at my end and I will look at bringing out a part 2 soon. Cheers.
thanks once again. .. for sharing your valuable experience and knowledge. I've literally about to setup a new studio for myself was thinking about the lighting... I got some brilliant ideas by watching this. tx again and keep up the wonderful work.. cheers!
Thank you so much Andrew for the input about the light. I learnt a lot from it and came very handy because I just bought a new lamp and daylight bulbs. I really like the way you explain everything , you make it easy to understand. Thank you so much for sharing your knowledge and experience. You have a very likable personality and are a FANTASTIC artist....love your work!!! Shirley
Thank you very much Andrew for your tip on studio lighting, in reply to my request too😄. I never happen to get a clear idea how to get the optimal lighting required when it comes to painting. Thank you very much for sharing your uploads.
Hey Andrew. Thank you for your videos... im learning so much from them! I'm a hobbyist and currently painting in my home in a room (don't have a studio yet). I cannot add the rails etc. What do you think about the standee lights that are available these days..the ones that are currently being used by ticktokers etc...its a standee lamp with a round tube like light. What is your opinion on that?
Hey Andrew! For the desk lamp setup, when you say "low wattage" what is it in lumens? (I will be using a 32inch swing arm lamp) Keep the videos coming! I really appreciate it. - Kristof
Terrific tips and goodon,ya for passing it on Andrew. The lighting and Oloegel are jobs for first thing tomoz ! Hwyl Fawr Dai Kayll, Pembrokeshire, West Wales
Great advice as always Andrew, your enthusiasm is very catching I always feel more upbeat after watching one of your videos and inspired to try whatever it was that you have taught, Thank you for making these.
Again great video Andrew..👍👍👍..Still waiting for your next painting... I guess ...your next painting video is that bird which is behind you....😏😏😏😏 I'm so excited...
What about the new LED lighting? I have added these to my garage wood workshop and gotten rid of the fluorescents and the lighting is great. It is bright but in the garage I actually removed the defusers. I'm thinking of trying this in my small painting studio, ie.. bedroom.. but using the defusers.
Thank you Andrew! This is another great tip- . Another question: "VALUES!".. It's not that easy try to see everything as "grey" and then find the right value. Do you have any suggestion about it?
Hi Andrew, thank you for your quick clips. I do find that your great DIY ideas are done too quickly! Maybe it's my aging brain, but I can't follow your clever builds because they are shown so briefly and without enough detail. Is it possible to have a link to a more detailed how-to for the lighting, palette, and wall easel projects?
No northern light from windows here? Lighting can be a big problem. I have limited light and also live on moody gray Cape Cod where we never know what kind of light we're going to get. The light for artists is actually better at Land's End in the oldest summer artist's colony, Provincetown where Robert Motherwell summered along with many other famous artists like Norman Mailer. Some painters are into Plein Air painting. I like to paint in the studio and have always used desk lamps with relatively little problem but my paintings haven't been super large canvases which need better lighting than smaller ones. Thanks for the tips...very interesting video.
this is great im surprised that i fig this out on my own very fast when i started painting i do have a eye for color and lighting hues i see deep details that others over look and yes iv been called crazy weird but thats how i am this was a grate vid to hep ppl understand the importance of lighting great job
I read that its likely Rembrandt painted using oil lamps and candle light judging by the tone and color range of his paintings. I guess the lighting must have been very low which is why in so many of his painting the white and highlights pop out so much. This video made me think of that. I wonder what his painting would have ended up looking nowadays with all the technically correct day type lighting we can emulate.
Andrew, I use a 5000K LED bulb in one of those cheap adjustable lamp mounted to the side of my shoulder. Works great. Those CFL socket bulbs are no longer sold here in the states. Too hazardous as you pointed out. Thanks, David
There may be a few still left on the store shelves, along with a few of the old tungsten (which are no longer being manufactured) but for the most part, the vast majority are LED's, a far superior technology. Thanks Andrew
Hey Guys,
I am in Alaska at the moment and just found a bit of internet to post a comment. There is a lot of discussion below about natural light. YES! I know. I actually had this as part of the video, but on the cutting room floor, is where it ended up! So, that said, many of you who mention that natural light is best, are right (sometimes). HOWEVER, if you watch the video on STUDIO SET UP you will see that like many others, I cannot control where the windows go in the studio, and I am not in a position to build a studio to my design, yet. Many of us have the studio we're given, either in our rentals, the spare room, or a kitchen bench.
So how then do you deal with the shifting light through the day? I have found myself working until dawn on several projects throughout my career. The light shifts all over the place, depending on the time of day.
One of the most important considerations is consistency, and it should have been in the video. Daylight is inconsistent, even when you have open shade. So, here in this video, are some ways that we can achieve consistent light. The first thing I do is block up the windows when I have a new space and set up the lighting rigs you see here. That way, it doesn't matter if I paint at 2pm or 2am, the painting appears the same.
Now, a HUGE thank you to everyone who brought up CRI (Colour Rendering Index). I need to go back and study, as I was not aware of this factor. I will make an update to this video in the near future!
Thanks for all the comments guys!
Alaska is beautiful! XD
Absolutely, consistency is most important. I also learnt something reading the comments as I didn't know about CRI!
Enjoy your holiday!
🙂
Great... Here is the real secret.... CRI Ra (8 colors) NOT GOOOOD. CRI Re (15 Colors) Oh Yes!!! ... and the most important is to Check the R12 (blue) and R9 (red) capability reproductions of your light source . Whith Love.
I like the idea that our paint mixing & color choice directly reflects the light fixtures in our studios.
Shower rail track for adjusting the light angle. Bloody genius!
The desk lamps with 5K bulbs are a real winner. I use them on almost any size works. it's important to consider phase cancellation effects in intensity when adjusting the lamps at varying angles, these effects can affect hue on the reflected surface. Thanks for sharing your " Dark Days" with us Andrew.
I know this is late, but could you tell me about phase interference. Thanks
Hey Hey How many lumens in
1 Fluorescent T8 sliding track (amount lumens)
2 Desk lamps #warm light and #cool light ??please help.
I've just set mine up! already such a difference
Hey, I actually do commercial lighting "design" for a living. It is very interesting to hear how an Artist's lighting affects his or her trade.
Two things worth noting that Tischler touched on. CCT, or Correlated Color Temperature, is how the color of light appears. This typically ranges from 2700K (Close to sunset orange) to 5000K (White with a tinge of blue). 4000K I would consider a neutral white, but I prefer to use 3500K in buildings.
The thing that Tischler is missing is CRI, or Color Rendering Index (measured from 0-100). This compares a select spectrum of colors against how they would appear under normal daylight conditions. The higher CRI, the more colors will resemble how they would look under daylight. 90+ CRI light sources do come with a cost increase, but if you are serious about painting, it is worth it.
As for dealing with glare, the larger, more diffuse the source, the better. Like Tischler's janky Flourescent T8 sliding track covered in foil.
Thanks Jetproof! I truly appreciate the expertise! I paint with what was working for me and cheap, based on what I could achieve within my means and limited understanding, but you have inspired me to dive deeper into research! I agree, if you are serious about painting, it's worth it. :)
Awesome topic and conversation! When I did my first art studio, it had 10 well-placed fluorescent fixtures, each with two tubes. I was lucky or smart enough to go to the "special" lighting place where a person like Jetpoof consulted me, all the while knowing past trials covered by the incidences Andrew covered here. The salesman informed me this would be $20 a bulb, plus tax for my lights (costly when I was doing full reno on an entire building) which were probably 4000K. $500 bucks later and I had awesome color, and the shocking thing was that many students said they loved the lighting and it was often said that they "didn't get a headache", apparently cheap fluorescents do that or at least it's "a thing". I also love the minimalist features covered here like the "hairpin" lights in cool and warm, hats off, my friend!
Thank you so much for the additional info! I am about to find what works the best for me for my art and this first video I watched + your comment just made it!
Hey Hey How many lumens in
1 Fluorescent T8 sliding track (amount lumens)
2 Desk lamps #warm light and #cool light ??please help.
Ott light CRI is 97!
Good video. As an aside, I wear blue shirts or jackets when plein air painting. Learned this from Monet and the boys. The cool light reflection allows you to paint brighter colors.
How awesome it's to be able of learning from someone else's mistakes without going through the same mistakes but taking the straight lesson
So that's why those paintings seem different. I always wondered why. Now I know its the light. I never knew light has so much impact on the end result of a painting. This is one of your best video's Andrew. Thank you very much for the tips.
Great Info. You are saving us time and money.
GOSH Andrew, I watched almost the whole series this evening and oh boy have I learnt a lot from You!! Very informative and a pleasure to listen to you. I truly enjoyed every minute of this series. My deepest thanks and appreciation once again, this was exceptional!! I could see your heart and soul in every brushstoke!! All the Best.
I have looked at several RUclips videos and yours was the only one that truly helped me! Thank you for your expertise, Andrew Tischler! I also prefer the light coming from high above so as not to create shadows. I am building a studio upstairs....but for now...Since I tend to move around, I purchased a 7 ft. Daylight U31375 Art Studio Lamp & Stand. It's wonderful and being that I like instant gratification...ha...Amazon got it here in 2 days.
Andrew- I have struggled with this for years!!!!!! Can never get the light right.
Thanks for this video. You immediately every question I have about this!
You have no idea how helpful this video is to me! I was about to spent about 700 doller on a pro filming light from aperture, but seeing that i could spent that money on other stuff like painting equipment. Your ideas will definetly come in handy, when im going to finish my studio decor! 😃
Just building a new studio in a tower by gulf in naples.
We are very interested in proper lighting. A unique
Endeavor!
Andrew, You are my type of guy! DIY! Great videos and very interesting to watch. Love your style of paintings too.
I just found light bulbs 5000 Kelvin and will connect them in series hanging from the ceiling. 4-6 will do it in my tiny space.
Oh wow, this is so helpful. Thank you!!
Hi Andrew, I'm just starting out doing charcoal on brown board. I found your clip very enlightening, no pun intended, and must say that even when doing charcoal the intensity of the blacks and grays are hugely affected by light intensity. I am already toying with the idea of blacking out the windows of my studio/study at home so as to make the best of stable lighting. Thank you for an awesome insight into lighting!!
For the best colors representation, always use light source which is rated between 5000K~5500K and above 90CRI (Color Rendering Index). Here CRI is a magic potion :) and to eliminate the distance issue, buy lights with dimmer options.
What are your recommendations for the light bulbs?
I respect anyone who uses Ryobi tools :)
Very useful tips! I found mixing warm & cool lights works well, and I checked my balance with something called a Kodak Color viewing Light Selector. It was a photographic trade tool that shows if your light is balanced or not with a couple of color patches that turn dark or light if it is not balanced, which shows that they match when balanced. I tried to google it but came up empty. Mine is very old but still works. It states: " If the patches appear the same color the light source is equivalent to a 5000K source with adequate amounts of red, green and blue light which result in a high Color Rendering Index." Kodak, 1987 P3-180. The photographic and printing trades used these all the time for color balanced prints (and all color printing is based on CYMK). If you use the photographic color wheel your color mixes might be better if you have trouble mixing colors. Looking forward to your next video- many helpful tips to thank you for! I'm a huge fan!
Another great video, thank you, Andrew. I learned my lesson once by staining a cabinet outside in the bright sun. When I brought the cabinet inside, it was way too dark. That was my Ah-ha moment. Now, I did change the lighting in my studio but your explanation of how different lights affect your work will greatly help my future projects.
This is a superb explanation. You, sir, are awesome.
You are always give us the best solutions thx a lot
I always look forward to your videos Andrew.
Thanks ... for sharing ...lighting is so important... I like your idea of having your lighting slightly dimmer on your canvas, so in average lighting conditions your painting is vibrant... wish I had your work ethic too :)
Why have i not seen this before.. THANK YOU so much for this info.. my current lighting is horrible.. I'll be looking into your ideas.
SOMOS CREADORES IRREMPLAZABLES❤
Your video on lighting confirms/re-enforces my thinking - many thanks for sharing!
The audio is beautiful. Levels are great. Thank you.
Great stuff, Andrew! And as pointed out earlier in these comments, the CRI of the bulbs should be a very important consideration as well.
Color Rendering Index is listed for most bulbs on the packaging and is the measure of the bulb's ability to throw a full spectrum of light across the work. It is *separate* and apart from the listed 'temperature' of the bulb. Temperature is the bias, or warm/cool cast, we see. CRI is the actual true "quality" (accuracy) of the emitted light. CRIs of 92 or above are recommended by those who know lighting.
And while "Daylight" and "Full Spectrum" are ad copy selling points, CRI is the actual true measure of a bulb's quality - and Temperature, e.g., 5000K, is the warm/cool cast of the light.
I concur with Andrew's brilliant suggestion to deliberately tend studio lighting a wee bit lower and cooler than "perfect." This will generally tend to slightly 'brighten' and 'warm' a painting in future 'normal' lighting.
Too many posts on this topic say we should have PERFECT lighting in our studios. And others paint with poor lighting saying that's how most homes are. Andrew's point is that illumination, distance, glare, and temperature should be set to accomplish the best work possible while making sure to avoid preventable and glaring errors like "the blues" or "dark and moody" ... when neither was the artist's intention!
That said - I've exhibited in shows that, and I know collector's homes, have widely varying lighting. We cannot account for every situation with our studio lighting, but we can plan for "preferred" lighting as Andrew suggests.
Thanks Wade, I will take this into consideration, and perhaps make an update to the video.
Thanks Andrew! I just set up a pair of those desk lamps and 5000k globes.
SPLENDID !!!
Andrew, You have magical hands
I think the color of the room or studio is also very important.
Wonderfully thorough. Thankyou
By far one of the most helpful videos I’ve found on RUclips! Thanks a lot for this!
Would you recommend using black and white umbrellas for the lighting?
Thanks man. Some worthwhile information there.
Thanks dear Andrew for this useful video!
I'm obsessed with your work😍
Wow, cheers! :)
Thanks man 🙏
Great video, thanks very much
Hello. Thank you for this. How do we measure the lumens? That seems to be another key to success. Did I miss that information? Thank you!
I have found using daylight is best for me, when it's a nice bright day witch is not very often living in England. But at night I just use the lights in the room, I didn't realise how much it can effect a paintings look.
One of my favourite lights to use is the sun
Muchas felicidades! Eres un gran artista saludos desde México
a great help! thanks
Amazing artist, wow! I'm on a quest to get better lighting, thank you
thank you this was very helpful !
This was greatly helpful. I'm in the middle of moving into my first real studio and excited to have this info!
Thank you very much for this valuable information. You just solved alot of problems for me . I went through the dark painting episode too from having a to bright of a bulb.
I've had this challenge for a while, I've been working with diffused natural light from a window (which seems cool) and an over the shoulder lamp with a warm bulb of 3500.....My issue is I need to move away from the wall so I can step back from my work (and have a little room) but my lighting will suffer! I can now see some more solutions to my dilemma, Thank You! Your work is amazing, please keep the videos coming!;*)
Andrew, you have some pros commenting but as a video professional and someone who adjusts lights often to 'repair' ugly, I would like to suggest something to those artists looking for the right lighting. Though your 5k solution is sound, I would need to tell you something important about fluorescents. GREEN. Those lights pulse beyond the range of human sight but pulse they do. And they pulse a green flash of sorts in between. That may 'subconsciously' affect your painting. To balance any fluorescent tube light, use TOUGH SPUN GREEN or TUFF GREEN or WINDOW GREEN over the light (a very cheap filter plastic which will not melt) so make your white light perfectly balanced. The "window green," (or "plus green") gel converts the light from a flash to nominally match that of a fluorescent light without the green amplitude and matches it to what is referred to as Tungsten.
By my interpretation, all the masters of the past used the ole big yellow ball in the sky, which to our eyes is actually quite warm, even with a blue sky. Using Plus Green will render artificial light without the green in it that makes us all look a little sickly. Think the reality that Neo had to deal with before he was 'The One' in The Matrix. That's fluorescents without any correction. there are clean incandescent bulbs you can buy already balanced for just that light. And TOUGH SPUN or a diffusion paper or filter over a desk lamp will soften that light.
And finally, there are super duper cheapo light kits available on Amazon which are pretty amazing for next to nothing by comparison to actual studio lights. These knockoff kits come with decent bulbs stands, and umbrellas. They are 'modeling' lights for photographers but they will cast very pretty CLEAN light. If you wanted something that truly did not bend your eyesight toward cool or warm or what have you, CLEAN TUNGSTEN is the way to go...That or open a window and step back a bit until you have a balance between the warm outside and the ambient albedo of the cooler light temps inside. Face your canvass to your window with your back to the window and as long as its sunny and the same time of day, you have it. That's pretty cheap too.
Hey DAVAD M DAVAD I hear you, and thanks for the comment. I think that there is a bit more research to be done at my end and I will look at bringing out a part 2 soon. Cheers.
I’ve heard about daylight lighting, that’s closest to true sunlight. Would love your opinion on this.
Hi Andrew, what wattage are you using for the deal lamps? I'm curious to your recommendation for brightness
Thanks so much for your information
thanks once again. .. for sharing your valuable experience and knowledge. I've literally about to setup a new studio for myself was thinking about the lighting... I got some brilliant ideas by watching this. tx again and keep up the wonderful work.. cheers!
wow! those paintings!
again such a great informative video tischler!! good job
Hey andrew...thank you so much ..i get more tutorials and same tricks from your chanel..i get enjoy and you too. Greeting from indonesia
Great advice, thank you
Thanks Tisch! I'm doing some things right w/o even knowing it! Very helpful as always!!
Thank you so much Andrew for the input about the light. I learnt a lot from it and came very handy because I just bought a new lamp and daylight bulbs. I really like the way you explain everything , you make it easy to understand. Thank you so much for sharing your knowledge and experience. You have a very likable personality and are a FANTASTIC artist....love your work!!! Shirley
Andrew, how do you light the subject for a portrait? What are the setup(s) or resources?
Thank you very much Andrew for your tip on studio lighting, in reply to my request too😄. I never happen to get a clear idea how to get the optimal lighting required when it comes to painting. Thank you very much for sharing your uploads.
your explanation on how to use the lights is really helpful and finally now I understand how should I equip my work area. thanks once again😄
My pleasure Shashi!
hey sir can u plz uoplad a video of yours rainy painting
i want some tips of how to make a painting of rainy season n how to giv that rainy effect
Okay, it's pretty rainy where I am right now, so I'll see what I can do!
Hey Andrew. Thank you for your videos... im learning so much from them!
I'm a hobbyist and currently painting in my home in a room (don't have a studio yet). I cannot add the rails etc. What do you think about the standee lights that are available these days..the ones that are currently being used by ticktokers etc...its a standee lamp with a round tube like light. What is your opinion on that?
Thank you
"too moody". what the heck, the painting is amazing!
sir your oil painting collection video plzz😍😍
Thanks for your info!
Oil painting collection? What do you mean? Tell me, I am eager to please. :)
Andrew Tischler sir a video which includes all your paintings you have done till now
I understand and I am ready the to set up my life
Awesome dude !
Hey Andrew!
For the desk lamp setup, when you say "low wattage" what is it in lumens?
(I will be using a 32inch swing arm lamp)
Keep the videos coming! I really appreciate it.
- Kristof
Great information.
Terrific tips and goodon,ya for passing it on Andrew. The lighting and Oloegel are jobs for first thing tomoz ! Hwyl Fawr Dai Kayll, Pembrokeshire, West Wales
Do you ever have any metamerism effects from using cool white fluorescent source?
Great tip Andrew, living in the Netherlands, we have months of sober lighting.
Great advice as always Andrew, your enthusiasm is very catching I always feel more upbeat after watching one of your videos and inspired to try whatever it was that you have taught, Thank you for making these.
Thanks so much Diane!
Good info, thank you. I like 6500k bulbs. They are also known as daylight.
Hey Andre! Aren't they too blue?
can you make video about your art books collection ?. love your video as always
Thank you for sharing!l love your videos! good luck with your new home!
Yes, on the way!
Hi from Canada Ontario 👋
Again great video Andrew..👍👍👍..Still waiting for your next painting...
I guess ...your next painting video is that bird which is behind you....😏😏😏😏
I'm so excited...
Yes, one of the upcoming tutorials!
Hey there, Quick question... When it comes to the compact fluo lights, would I not need to filter or "shade" the light as you do with the tube?
What about the new LED lighting? I have added these to my garage wood workshop and gotten rid of the fluorescents and the lighting is great. It is bright but in the garage I actually removed the defusers. I'm thinking of trying this in my small painting studio, ie.. bedroom.. but using the defusers.
Thank you Andrew! This is another great tip- . Another question: "VALUES!".. It's not that easy try to see everything as "grey" and then find the right value. Do you have any suggestion about it?
i was literaly just thinking i wanted a new video of you! ^^
I aim to please! I can also read minds.
Hi Andrew, thank you for your quick clips. I do find that your great DIY ideas are done too quickly! Maybe it's my aging brain, but I can't follow your clever builds because they are shown so briefly and without enough detail. Is it possible to have a link to a more detailed how-to for the lighting, palette, and wall easel projects?
Understood Debra! I will make an effort to put together clearer instructions in the future.
Fantastic video. Very illuminating :D Now i will try a better setup for my lighting. Thanks. By the way, great muscles
For natural solar light through windows.... What is ideal ?
Glad I subscribed, this is great info covering everything that needs to be taken into consideration for studio lighting. Thank you
No northern light from windows here? Lighting can be a big problem. I have limited light and also live on moody gray Cape Cod where we never know what kind of light we're going to get. The light for artists is actually better at Land's End in the oldest summer artist's colony, Provincetown where Robert Motherwell summered along with many other famous artists like Norman Mailer. Some painters are into Plein Air painting. I like to paint in the studio and have always used desk lamps with relatively little problem but my paintings haven't been super large canvases which need better lighting than smaller ones. Thanks for the tips...very interesting video.
this is great im surprised that i fig this out on my own very fast when i started painting i do have a eye for color and lighting hues i see deep details that others over look and yes iv been called crazy weird but thats how i am this was a grate vid to hep ppl understand the importance of lighting great job
I read that its likely Rembrandt painted using oil lamps and candle light judging by the tone and color range of his paintings. I guess the lighting must have been very low which is why in so many of his painting the white and highlights pop out so much.
This video made me think of that. I wonder what his painting would have ended up looking nowadays with all the technically correct day type lighting we can emulate.
Sam’s Club has a dimmable LED 4ft shop-light at 5000 color temp for $30
Hi,Do you mean this one 👉www.samsclub.com/p/rectangular-dim-lght/prod21234625?xid=plp_product_1_1-
Wait really...??? That’s crazy cheap
I was actually considering using aquarium LED fixtures. But I’m glad I read your comment. That sounds really good
You are a fantastic teacher. What made you want to teach your art?
I love to share with others. I LIVE for it! Sometimes you just have to do what feel right and brings you the most joy. Thanks for the comment.
Andrew, I use a 5000K LED bulb in one of those cheap adjustable lamp mounted to the side of my shoulder. Works great. Those CFL socket bulbs are no longer sold here in the states. Too hazardous as you pointed out. Thanks, David
Woah! No longer available? Still a little behind down under... duly noted, I will make an update to this video for sure. Thanks David!
There may be a few still left on the store shelves, along with a few of the old tungsten (which are no longer being manufactured) but for the most part, the vast majority are LED's, a far superior technology. Thanks Andrew
Right in time ; I was about to make a research on this tank you !
First video I found and you answered all my questions! Thank you so much! Now time to figure out my own lighting for home :)