My Crazy electrician moved my Electrical Service with Live Wires ||| Dream Home Renovation Ep. 4
HTML-код
- Опубликовано: 5 дек 2023
- Moving an Electrical Service Panel should not be done with any live wires. Disconnect all power to your service panel before attempting to move it or perform any maintenance. Make sure you contact your local electrical company to de-energize any electrical wires before doing anything like this. I’m serious!
Make sure to Subscribe and Hit the Bell notification to follow along on our journey with this Renovation!
Dream Home Renovation Episode 1 - • I Started a Massive Re...
Dream Home Renovation Episode 2 - • My Wife made me Rip Ou...
House Tour Video: • We Just Spent Our LIFE...
FOLLOW ALONG ON SOCIAL MEDIA:
LINK TREE
linktr.ee/KomarProject
Huge Thanks to Joel from Electrical Pro Academy for putting his life on the line for me. Check out his Channel, he has a ton of electrical tips and tricks to share with you :
/ @electricproacademy
Get your Komar Gear Here teespring.com/stores/komar-pr...
Check out my Recommendations for Beginner Tools www.komarproject.com/ndiytools
HUGE Thanks to everyone who has helped on this Renovations!!! We so appreciate it.
OTHER VIDEOS TO WATCH
Modern Dog House • How to Build the Perfe...
3 in 1 Grill and Pig Roaster • You WON'T Believe What...
Mini Split Installation • How to Install a DIY M...
Miter Saw Zero Clearance • Zero clearance insert ...
Ultimate Chicken Coop • How to Build the ULTIM...
10,000 Pencil Table • Epoxy Coffee Table out...
Wood Lowrider Bike • Making a ALL Wood Low ...
Router Table • Ultimate Router Table ...
Concealment Flag • Motorized Concealment ...
Backsplash Tile Installation • How to Install a Subwa...
#electricalservice #electrical
Music By: www.epidemicsound.com/sfx/ 
Хобби
Don't be Fooled! Jefferson Electric has his own RUclips Chanel. He's a MASTER electrician who specializes in large commercial builds. This single home job, to him, is overly simple.
Still illegal to pull meter, plus the line side belongs to the utility company and they can prosecute.
It’s crazy that they didn’t put a protection over your underground cable and I so glad Joel had his safety glasses on lol
So exciting and funny! Joel is a boss electrician! Thankfully we did not do any dying!
True that
I can't believe that wire wasn't in pvc pipes whoever did that wiring is a clown 😮 you two are legends ❤
Just watching this made my butt pucker LOL! Great job gentlemen.
Haha me too lol
No zap zaps for the win. Joel is the man. Great video!
Joel is the man. Electricity is the only thing I don’t do! Saw him on Stud Pack and now here. Is he the electrician to the YT creators? Need to get myself a channel. 😆 But seriously, I’ll have to subscribe to his now. Great job! I’d never do that even for a $1M.
Yes you have to check out his channel. There is so much interesting electrical tips. I watch all of his videos and hope i never have to do it myself lol. Electrical is so technical that I just rather have Joel do it 😆
To be honest, I was more worried about you grabbing and handling the slack in the main lines as he moved the base... a nick in the insulation from shoveling could be bad... A company i worked for in the past once after putting a 2 story addition onto the side of a house needed to move the overhead feed from the original location to the addition as a new pannel was installed there for the extra load. The owner was also a licensed electrician, and when time came, up the ladder to disconnect the lines from the mast head, one at a time taping each good, then dropped the line into the front yard. then he got down, moved the meter over to a new base over on the new addtion, went out to the yard to grab the line, and up the ladder to connect it up. (we had someone in the front yard the whole time to keep watch to make sure no one went anywhere near the line while it was down.)
Respect!
I did this in the uk, they quoted me £3k to do it and i did not want to pay.
The existing feed was to a mobile home on the build site and i wanted it to my nrw house. I dug back along the cable then towards the new location then disconnected it with high voltage gloves on, taped the ends, mover the power meter to the new box then connected it in.
Covered the cable with sand and slabs the warning tape and back filled.
Job done zero cost
I dont think i took a single breath this whole video! Damn it!
Brave!😵💫
you should upload your next video in 24hrs/./
can't wait to see it ...
Haha working hard on it
Nice to see this but he should have had on more ppe. Better arc shield mask and somthing to prevent his exposed arms in case of an arc flash. He still could and you could have bean seriously harmed by stray voltage as well. When he said you have 220 legs comming in on ether side you need to double that to 440. Thats a hell of alot of voltage Comming in. But it can be done and it was still enjoyable to watch and see. And i have done the same joke with my wife about acting like im getting zapped by electricity. Lol funny as hell too.
Right On 😂
One question, when doing the framing around 35 second mark, why did you run less joists longer instead of more but shorter joists to the foundation? Wouldnt they be much stronger that way?
I feel like I need to do a lot of work at your place to make up for the zero work that I have done thus far.
Ya you do !!! Bring it
Joel's cheating on Jeff from Home RenoVision DIY?!? FOR SHAME! Just kidding! Great video; thanks and keep 'em coming.
He was my first lol
PLEASE READ! I’m commenting on your most recent video because you don’t seem to respond to new comments on old videos and I am OBSESSED with the textured tile you used for your kitchen back splash 3 years ago! Can you please give me more information on that tile so I can try to find it? Thank!!!!!!!!!
So what is it that kept him safe with those live wires? Was it the gloves or was it something else?
The gloves, a tremendous amount of skill, and a little bit of luck.
The gloves are preventing his hands with moisture in them becoming a conductor, of electrical energy, they also help prevent arc flash to a point. As long as you are not making a circut you can hold on to live wires all day long without getting zapped. However he should have had a proper arc face shield and protective clothing on while doing the disconnect and reconnect. It's just good practice.
@@nicktrayer5426 i was wondering about the shield he was using. I looked like an ordinary kind like people wore at the start of COVID.
Yes there are specific arc flash face shields they are tinted to also protect the eyes from the bright arc
😂. Reminds me of my Grandpa who was an electrician. He was very good, and (for reasons I never understood) preferred to work with live wires. Worked every day until his last few at age 85 or so (totally unrelated to electricity). Made me a nervous wreck! 😮😅😂
Your grandpa is my hero lol. Every electrician that works with them is a true tradesman
@@KomarProject so true!! 🥰
and Nobody Died!!!
What the heck! This is extremely irresponsible.. and illegal. How can you put it on RUclips with a good conscience and make money from this? Also, I'm sure the town inspector can cite you for this given you just published the proof for the world to see...
I just watched the video with the inspector. He loved it just like you
@@KomarProjectYeah since this is temporary inspector wont really care as long as its still done safely and live connections are not exposed to bystanders, Power company might not like it but by the time you are ready to make it installed perm, they might actually be ready to disconnect the power properly for you by the book