RadioMaster Zorro Binding & Fine Frequency Tune Receivers
HTML-код
- Опубликовано: 21 фев 2022
- In this first video of the tutorial videos for the Zorro radio I will show you how to bind your receiver to the radio and complete the fine frequency tune process which is a step you should not over look if your receiver requires the process to completed.
How to help my channel:
You may have noticed I do not have mid-roll advertising in my videos I feel this may detract from your viewing experience but this does have an effect on my revenues so my Patreon's are very important to me. So if you can join my Pateron it would help me out immensely. Please see link below.
Thanks for watching.
Happy Flying.
Ways to help support my channel.
Please consider becoming a patron of my RUclips channel.
/ billclark
By using the affiliate links below I will get a small commission on your purchases but you will pay no more for your order.
General Affiliate Link to RadioMaster:
radiomasterrc.myshopify.com?sca_ref=1531318.eCAoyeniWT
General Affiliate Link to Banggood:
www.banggood.com/custlink/3vG...
General Affiliate Link to Emax:
emaxmodel.com/?ref=5y8gnbt61d
Thank you for your demonstration of why frequency fine tuning on a Radiomaster transmitter is important and also for your clear explanation of how to do it. I've just bought a Zorro so this video was just what I needed.
Thank you!!@👍🏼👍🏼👍🏼
Nice
A bought the Radiomaster Zorro and initially I was having g trouble binding. Then once I got several of my drones binded, I realized that the sticks and other functions were backwards (inverted). Even in the simulator the sticks are all out of sink. Can you help? I have the 4-in-1 version.
Hello Bill. I'm new to EdgeTx and the 4in1 Zorro (I usually fly Futaba and bought this for my park flyers), and with your help managed to bind (FlySky fs-ia6b & fs-ia6) and fly four planes. Thanks for that! Then, over night, all were completely unbound. I had added a Conscendo glider and had it set up on the kitchen table. Next day at the field the binding had come undone. I could not re-bind it. I checked the other planes to remind me and discovered they were all completely unbound as well. I simply cannot re-bind any. Do you have any thoughts on that? Two things of Interest. After pressing the bind button the bleeping will not stop, and I have to restart the radio. Every time. Also, in this video, you use the 'Internal RF', which gives you Multi (mine does not), whereas my Multi is only on the External RF Mode. All very strange, not to mention frustrating. Any thoughts? Thanks again.
That is strange Scott. If you had not updated the radios firmware then it sounds like you have a hardware problem. If it was my radio I would check if anything has come disconnected inside the radio.
I have the same problem!!
Hi, do you know how to setup twin props with the zorro 4 in 1...? Also maybe as an additional variable speed to act as rudder.....Thank you..👍
Hi Jonathon, this video will help you. ruclips.net/video/qNsbmhfFxyA/видео.htmlsi=Q2fX6OQhjxCNSYHc
Hi,
Very grateful for you. Does it work with DSMR protocol for Spectrum RC Cars?
Thank you
Hi, I have checked the multi protocol module website and the following can be bound to the MPM Spektrum DSM2 and DSMX compatible receivers.
@@the-happy-RC-flyer Very grateful for you. Thank you
I am planning to add external expressed lrs nano module for zorro 4 in 1 does it work?
Yes it works perfectly I have an ExpressLRS external module attached to my Zorro radio.
Hello
I am new to RC plane/quads etc and recently bought a Radiomaster Zorro 4 in 1 but unfortunately, it wouldn't bind with a Frsky R8 Pro (Access).
Is 4 in 1 Zorro not compatible with Access protocol?
Yes you are correct you can only bind ACCST receivers to the module in your Zorro radio.
Thx Bill 4 your videos !!!
I have the Zorro 4in1 with edge tx and a r84v2 receiver. Which protocol should I use ? There's no D8 in Zorro edge :-(
Pls help
You need to select FrSky X then Subtype D8.
@@the-happy-RC-flyer thx! It worked !
your videos are interesting and helpful :-)
Hi Bill, i have done the frequency funing am i doing it good i got lowest -37 and highest 45 so if I'm right then it's 12 devide x 2 is 6?
If you readings are -37 & +45 then +8 / 2 = 4
@Bill Clark sorry i mean -37 and + 49 yeah i understand really good thank you appreciated
Thks for your clear video.
I tried binding a XK K110S, but failed. For a start, when I press the BND button in the SETUP, it does not give me all thise options that you show; which is odd, since I have a recently bought Zorro CC2500 (EdgeTx 2.7.0). Any hints, please? Thks in advance.
Hi Vasco, the MPM 4 in 1 does have a lot more protocol options. Are you selecting S-FHSS?
@@the-happy-RC-flyer Thks for your prompt reply. Yes, definitely. I usually fly it bound to an XK X7.
Further to my reply above: I have a config for another bird, which has not arrived yet. So, changing the receiver number gave me an instant bind on the XK K110S. Thank you again for your help.
Hey Bill. If there is no option for fine tune is it still needed or is there another way to fine tune the frequency?
If the option is not shown you are ok because you do not needed to do the process for your receiver.
@@the-happy-RC-flyer thank you Bill. Just trying to get the best signal possible. Do you think adding an external antenna is possible and or will it help with range?
@@JustEnoughRC the Zorro does have an external antenna which when in position is horizontally polarised but you can unclip it and position it vertically. On the RadioMaster website there is an antenna upgrade kit which I think would possibly improve the signal. I will get hold of one and do the upgrade.
@@the-happy-RC-flyer sounds great Bill I will wait for your upgrade before I try it. thank you very much
Jude
I have and issue with 4in1 i created a model and bind the radio with that drone, its flies well without issue(flysky reciever) after that i made another model and bind with another quad its works well but when i choose the first model its is not connecting and i need to bind again i dont why this is happening
Did you give the models the same receiver number?
Thanks for the tutorial but I do not see this option with DSM receiver from Spektrum. Any idea how to do this for Spektrum receiver
Which radio and which firmware are you using? If EdgeTX select Mode Multi and then DSM and RF Protocol Auto. You may need to select the protocol it Auto does not select the correct protocol.
@@the-happy-RC-flyer hi yes I picked right one and it binds well and all but I don’t see this frequency tune. Anyway did more digging and it seems this radio firmware has issue with telemetry meaning while it says RRSI signal is low. In reality it is not it. So most people are disability the telemetry option
@@awsstvawsstv2809 if you do not see the fine frequency option you do not need to fine frequency the receiver you are using.
Will the Zorro CC2500 version work with the R161 receiver or do you need the 4n1 version?
The R161 will bind to the CC2500
@@the-happy-RC-flyer thanks, I found it online too. I saw your video on the R161 and the patent infringement- didn’t know this! I actually bought a bunch of these last year bc they were so cheap and easy to use. I love the options like S PORT and RSSI on an inexpensive little device. I literally have 25 of them.
Hello which receiver are you using for this radio controller?
I've seen that its compatible with Frsky protocols, I already have an X8R module do you think it would work?
In the video I used a D16 receiver. If the X8R is a D8 it should bind to the MPM in the Zorro.
@@the-happy-RC-flyer Please be more precise about Your receiver. FrSKY has no D16 receiver, the only D series receivers were D4R-II, D8R-II, D8R-XP.
@@piotrkojder7177 D16 is the protocol the receiver uses to communicate with the TX. Check your manual or look up your receiver on the internet.
@@the-happy-RC-flyer I know what is D16 protocol, I just want to know what model of RX is used in this video and why FrSKYX2 is chosen instead of FrSKYX. I am using Frsky X9R, R-XSR and XM+ RXes and need to be sure that Zorro suits me.
@@piotrkojder7177 hopefully this will explain the protocols:
FrSky receivers can me tricky to bind because of the different protocols.
FrSky X
FrSkyX2
and then FCC & LBT-EU versions.
If you are in Europe then you must use the LBT-EU version.
The firmware on the receiver must be ACCST and not ACCESS which will not bind to the multiprotocol module I am almost certain yours will be ACCST.
So try X and if will not bind try X2 and I am sure you will come right.
Hi Im in page 2 looking for frequency tune but its not there, Im using radiomaster new pocket radio and just cant connect my Speedybee master 5 v2
If you do not see the Fine Frequency Tune option then you do not need to do the process for the receiver you are binding to the radio.
what is the equivalent is Orange rx in the options?
Hi Don, I have never tried binding a Orange RX to the MPM but just searched the MPM website so try Spektrum (DSM)
I tried to bind to my little Blade Inductrix FPV+ using the "Quad" model already in the menu, (it binds to my Spectrum Dx6i DSMX with no problem), it seems to BIND to the zorro, but I can get no action from the quad, and a constant Telemetry lost/recovered warning? I do not see the fine tune option showing? I am Brand new to the Radiomaster Zorro, and It is fresh out of the box with the Full 4 in 1 protocol. I can get it to work with my Simulator fine. Where do I start? I cannot find much help in the manual.
Matt I need a little more information what receiver does the drone have?
@@the-happy-RC-flyer it is a Spectrum, I believe DSM. I believe I may need to program an ARM switch. But not sure which one. Or how to tell which one the Drone will accept.
@@mattfarr1323 there is a bit of work todo to set up your drone in OpenTX or EdgeTX. I would suggest checking my playlists where I did a series of videos start to finish setting up your drone. This will help you. If not already a member of a club I would suggest seeing if you can join one where someone will help you.
hi I have a problem with my radio master zorro I have tried to fine tune the frequency on it but every time I turn it on and want to fly with my omp hobby m2 evo it says the signal is critical is this something you might be able to help with is something I'm doing wrong I'm doing the same as you show in your video greetings Kim
Hi Kim, if you have fine frequency tuned your receiver and still having signal is critical warnings you need to check the receivers antenna is connecting correctly and positioned away from other electrical interference not next to other wires or servos etc.
@@the-happy-RC-flyer okay, I'll try that, thank you very much for the quick feedback, regards Kim
Hey bill I have elrs 2.4gh Receiver I’m having trouble binding it to my radio master zero elrs 2.4 version please I need help
Hi Jean, firstly which receiver are you wanting to bind to your Zorro? Are you trying to bind a new receiver? Have you set a binding phrase? Do you know if both the radio and receiver are on the same firmware version? Can you tell me what the LED is doing on the receiver with both the radio and receiver on?
hello there I need help I'm using crossfire everything is binded. but wen I got to fly the drone fly crazy. I took my v2 off my radiomaster tx16s and put it on the zorro everything works but when I get in the air it make sharp turns or it speeds off fast. plz help
Have you checked all the settings on the radio and in Betaflight are correct? It could be your flight controller, have you calibrated the gyro?
@@the-happy-RC-flyer I did what u said and it worked its flying like it did with the tx16s now thanks alot...
Hello, i had some troubles with binding XM+ to my zorro, After all it worked on the EU instead of D16 but i dont have RSSI signal in radio. What can i do to fix that?
This video should help you ruclips.net/video/hxtoYRjTr_I/видео.html
@@the-happy-RC-flyer The problem is that i don't have any sensors or anything in Telemetry page, and also Discover new option doesn't find anything
@@TheKunext I think you need set up RSSI forwarding as per the video.
@@the-happy-RC-flyer i did as on the video but i don't have anything in telemetry page. I even tried to create own source but still didn't work
@@TheKunext is you RSSI showing on your front screen of your radio? You will not have any sensors in the telemetry window because the XM+ is not a telemetry receiver.
What type do i have to use for flysky, if i scroll in type flysky disappears
Do you have a 4 in 1 or CC2500 module in your Zorro?
A 4-1
@@jorikennik3395 when you turn on the Internal RF FlySky Std should come up first. What firmware does the MPM have newest is 1.3.3.20
@@the-happy-RC-flyer i will check tomorrow, thanks for the quick replies. You really care about the community😄 you deserve a sub
So this is what happens to me, flysky pops up for a sec says type: standard and then invalid protocol
Iam using Flysky reciever this radio sucks doesn't even have a line of sight range
Please check if you have the option to fine frequency tune the receiver in the binding window. If so do it if not check your antenna is connected on the receiver.
@@the-happy-RC-flyer and what if you don't?
@@jorikennik3395 you do not need to do it.