Great video. I’m up in Vancouver Canada. My question is, with 100 feet of high-pressure hose, how is your chemical injector pulling chemicals that far to the gun? Do you have any small 12 V pumps helping the pull? Great invention!
I like it ,i do have almost the same set up with a different nozzle at the end that allows me to do the soaping on a higher pressure ,nothing wrong with the trombone nozzle but on my experience you have to be carefull with the piston or plunger whatever is call because they are to flimsy ....just my two cents .
it depends of your machine output gpm,psi etc. for example my machines are 8 gpm 3500 psi so the two inside orifice on the roll up nozzle are too small so i have to make them bigger and put a 1/4 inch extension pipes on both ends to make the spray pattern more even and also helps with the chemical draw cause you don't put that back pressure into the pump due to the incorrect nozzle size,you will have to experiment with your machine set up until you like the pressure of your machine even downstreaming soap and the enough chemical withdraw too
it all depends. Prices vary. Rather you get a trailer or not. You have to make calls on getting a hot water unit. Paul from Power wash store has good prices on what they call there water dragon heated machine. Give him a call. He could also set up the 2 step gun for you if you wanted him too.
I wash semi trucks, trailers, flatbeds and tankers. What acid and soap is it or which do you recommend? Also does the 1st step always have to be acid and 2nd step soap or can it be reversed?
Hey Daniel thank you! .4 your infor is Great.What side is your 3 way valve so I could purchase it @ Envirospec. also what the Name of your Acide.I used Wab Acide in New York.you are Awesome!! Thanks for sharing!
Curious how you are mixing your acid and soap with a fixed injector? I'm using an adjustable one due to the fix injector having to strong of a ratio, so I can dial it back
![Felix "Unfair" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/Oswujxm2Ag0/mqdefault.jpg)
Really appreciate your explanation of your two-step set-up.
Best informative video I’ve seen yet. Thanks for sharing this.
Can you please give a parts list how to make that set up?
sick video man!!
very helpful keep em up
I do soft wash and this would be awesome and convenient as hell!
Thanks for the Video
Ty best explanation on down streaming🙏🏼
awesome, what type of soap and acid you use????? You wash semi's?
Great video. I’m up in Vancouver Canada. My question is, with 100 feet of high-pressure hose, how is your chemical injector pulling chemicals that far to the gun? Do you have any small 12 V pumps helping the pull? Great invention!
Could u tell me what pieces u use and where i csn find them
A shop vac at one end will suck those lines in the hose.
Where can I find the double sided solid plug, can’t find em anywhere
what truck would you recommend to carry that 500 gallon tank of water?
What size injector is your gun using? Thanks for your help.
1000th subscriber! good info daniel!
I like it ,i do have almost the same set up with a different nozzle at the end that allows me to do the soaping on a higher pressure ,nothing wrong with the trombone nozzle but on my experience you have to be carefull with the piston or plunger whatever is call because they are to flimsy ....just my two cents .
what tip do you use to soap and rinse under pressure while downstreaming? thanks man
modify roll up nozzle couple simple modifications and it will work like a charm
Hector Martinez what is a modify roll up nozzle?
it depends of your machine output gpm,psi etc. for example my machines are 8 gpm 3500 psi so the two inside orifice on the roll up nozzle are too small so i have to make them bigger and put a 1/4 inch extension pipes on both ends to make the spray pattern more even and also helps with the chemical draw cause you don't put that back pressure into the pump due to the incorrect nozzle size,you will have to experiment with your machine set up until you like the pressure of your machine even downstreaming soap and the enough chemical withdraw too
Hector Martinez Thank you Hector....I appreciate your reply!!
great advice. Thanks dude
Awesome!! Thanks for sharing!
Thank you for this!
Where could I get this nozzle from
Great video! What's your number one suggestion for marketing a new fleet wash business?
Man I need one of these setups.
Where can I get that plug at? I can’t find it anywhere
Great set up.Where could i buy a 2 step gum set up from.
Santiago Dunbar hydrochem but it’s like 2500$
Need a gun?
How much for all the equipment you have? We wash trucks too and want to do wash with heated pressure washer. Nice job!
it all depends. Prices vary. Rather you get a trailer or not. You have to make calls on getting a hot water unit. Paul from Power wash store has good prices on what they call there water dragon heated machine. Give him a call. He could also set up the 2 step gun for you if you wanted him too.
Daniel Rodgers okay thank you so much!
yes sir
Daniel Rodgers can’t seem to find that 1/4” plug anywhere, please advise, thanks.
Daniel Rodgers where do you get the solid brass nipple
What do you charge for a tractor trailer pressure wash.
Where did you get the solid 1/4 inch plug at? I can't find it anywhere around me or online.
Did you find out where get that plug nipple
All you need is a bolt with same npt thread, cut it so it will thread both ends and presto
I wash semi trucks, trailers, flatbeds and tankers. What acid and soap is it or which do you recommend? Also does the 1st step always have to be acid and 2nd step soap or can it be reversed?
Can you help me build one ? Do you have a parts lost or where you got everything?
Good job
Hey Daniel thank you! .4 your infor is Great.What side is your 3 way valve so I could purchase it @ Envirospec. also what the Name of your Acide.I used Wab Acide in New York.you are Awesome!! Thanks for sharing!
Could you teach me how to make a 2 step gun like yours? Or do you have a video that explains how to make one?
very helpful. thanks for sharing
I'm having problems getting it to pull chemical , is there anything on the pump to help or what is the gpm and psi
What did it cost to make?
Where did you get the plug at?
Hey Daniel do you cut your acid? and if so how much
Great video man. I’m in the process of building that gun set up
What chemical injector is that?
Would you make a sale these guns?
what are the main things you need to get started business as far as insurance and that kind of stuff
Call Joseph walters insurance they specialize in power washing insurance. I have used them for years. just google there name
Curious how you are mixing your acid and soap with a fixed injector? I'm using an adjustable one due to the fix injector having to strong of a ratio, so I can dial it back
+Matt Cogdell that is an adjustable injector see the dial
You can use adjustable or fixed. I prefer fixed but might have had an adjustable on there
super slick.
Where can I get that chemical injector? Is it a special kind?
What do you have at the end of the hose so it doesnt slide down ?
Where can i purchase a 2 step gun from?
Can I buy that hose at Home Depot or lowes?
What'd that cost you?
what pressure washer are you using?
it is a 8 gallon a min. Pressure pro
Anyone found the m-m 1/4 NPT plug???
Well damn. 🫡
What chemicals do you use? I new to the 2 step from hydro Chem systems just bought my first kit can you send me some info on how you use
apply the fleet prep first over the surface cleaning then come back over it with the dyna clean soap. Acid first step, soap is the next
Daniel Rodgers where can you find the solid hex plugs?
What down steam injector are you useing
U based out of sav
I typed in 2 stepping in a car wash