How to disable secure boot for HP computers to upgrade graphic card (Windows 8)
HTML-код
- Опубликовано: 22 авг 2024
- This a video to show how to disable secure boot and enable legacy mode. This process is usually for a lot of OEM windows 8 machines like HP computers. For more details about this process, just go to the following link: support.hp.com/...
I did this process in my HP envy h8 1437c desktop computer that came with windows 8 preinstalled. But I did this process after I updated to windows 8.1, but it doesn have to be windows 8.1 for this process to work. I did this process because I wanted to upgrade my graphic card from a Nvidia geforce gt 620 1gb (came with the PC) to nvidia gtx 970. I was successful in upgrading. Also I bought a crosair cx 600 so the graphic card and the rest of the parts has sufficient power to be able to be used. So before installing a video card in OEM machines like HP that came with windows 8, u must do this process and then boot up your computer and uninstall all the graphic drivers that is installed for your old card in your computer and then remove the old card and put the new one in whether its the nvidia gtx 970 or any card. Also make sure u have enough space in your PC and your motherboard support PCIe gen 3.0 read the device manual of your PC if u bought it from a OEM company. For me I bought the MSI Nvidia GTX 970 4G and it was really big card and my current case had enough room to fit it, but the power supply in the other hand was a bit of a problem, but by using a bit force and bending the back of the case a little I was able to fit the cx 600 power supply in. It was harder than I thought and much more force had to be used, but at least now everything works so far. I am even running windows 10 by upgrading from windows 8.1.
Thank you. HP Envy 1437C. Wasn't sure where the bios settings were hidden in HP's boot menu till now and didn't want to spend an hour cycling through all the choices to find this setting. Hugely helpful. Thanks.
+Andre Bell yea no problem bro and thanks for your feedback, if u need any help just contact me or leave a message on youtube and i can help u with your pc
Totally unrelated for me I’m not installing graphics card but after I upgraded windows 10 I was in legacy mode I didn’t noticed that but thank you for this now I can put uefi back
Im trying to install Linux, and I do not have a "secure boot configuration" option from within the 'Security' tab. My computer is the HP Compaq 8200 Elite Ultra-slim PC
Have you found a solution? I'm struggling now
Very helpful. Now, a word of advice from a radio / TV guy. Do not add extra conversation. Only go over the material needed. Also annunciation. Either your microphone is bad or you are not speaking clearly. Either way you are coming across very jumbled and mumbled. Lastly, steady cam. Again maintain focused on the subject material. Do that and your viewers will not be confused as you provide this very helpful information.
Eddie Dexter Stewart thanks for your feedback, lol this was like this cuz it was one of my first videos that I recorded with a iPhone to start out. But yea now I use different tools to record and I will post more helpful videos when I have more time.
Unfortunately, this doesn't work for me (using an old HP Compaq DC7800).
The BIOS menus look very similar but 'Secure Boot Configuration' does not appear as an option in the security section in the BIOS settings.
I am unable to boot from a USB thumbdrive.
Highest quality video on youtube.
HP ENVY All-in-One - 27-p009ns: I had issues with window. The guy I bought this PC from had messed it up and there was no way I could reinstall a clean version from Microsoft website. Because, first it asked to convert to GPT from MBR, when I did that I was still getting errors. I did a lot of research and found out I had to convert Legacy boot to UEFI. Now I wasted a whole day trying to find that option in the Bios setup but couldn't find it. In total 4 days wasted and frustration level is very high. Until I found this video. I think Secure boot is what HP call the UEFI. I have disabled the Legacy Support and Enabled Secure boot. Download a fresh copy from Microsoft website. Will use the bootable USB to install it. Hopefully, this time it will work. I am quite sure it will. Thanks you in advance.
Update: Issue not fixed. Now I am getting error that HD has been converted to MBR, I didn't do that, no idea how it happened on it's own. Could it be a hardware related issue?
Did you get a "code purple " when trying boot? If so you can try a hiren boot cd. F10 on boot to select boot from cd. This will load a stripped down version of xp into the ram allowing you to start up the computer and diagnose it. You may need to delete a security file. This happens bc hp computers use " tattooing " between the motherboard and hd. I hope this helps. Look up hirens boot cd here on RUclips. The software is free to download. The vids can walk thru step by step. Good luck
@@mattraines6404 Thanks for your help Matt. There were two issues, one the F10 key on the keyboard wasn't functional and caused a lot of problem second I think SSD wasn't primary and I was still trying to install window on it. I installed windows 10 on main HD and the computer is fine now but slower because SSD is not being used. I activated windows 10 on HD, I have no clue what to do now to get SSD back in action.
@@MohiHash maybe.. you could image the hd onto the ssd ( basically making a backup of the hd) then slave the hd. Then go into the bios and have the computer boot off the ssd. It should only read the hd as storage and file retrieval. In theory the motherboard and the ssd would have no problems with the windows install or the key and run like its supposed too. After all this try disconnecting the hd and try to start the computer. If it works reconnect the hd. Good luck.
OMG Thanks!!!! I needed to do this for NR2003
I love you so much, I was really scare cause my pc doesn't work, thank you so so so so much
Thanks man. This drove me crazy
Thanks! At Last I Found My Security Boot Option
But doesn't this disable the TPM chip, which is needed for bitlocker ?
It said no boot disk has been detected
Thanks!! This worked on my hp omen
Why there is no secure boot configuration setting in my computer
I am not sure, it may be you have a older computer like before 2009 maybe. Is your pc the same as the vidoe? What is the model number?
HP Compaq dc5700
TechieShu so if we dont have secure boot configuration how we will open the computer please tell me💔😭😭😭😭💔💔
@@xd3418 لقيت حل؟ اذا لقيت ساعدني بليز
Fan Boy وديه محل بيعرفه
do we do this before or after we install the new graphics card??
before installing the graphic card
Thank you so much my friend❤
Sir how to enter that 1848 + enter - to complete change
Thanku. Very much. Very. Very. Thanks 100% useful
Im using hp compaq 6200 s, everything I followed your steps, but my advance settings, I don't have an uefi firmware settings. No2, my bios doesn't have a security boot configuration.
Same
i kind of have the same bios so can you tell me how to overclock my cpu in this?
Hey bro in my laptop there is no secure boot option also no legacy support
Did you fix it ?
How do u enter the pass code which button do I press????
Diego margaritaolmedo use the keyboard what else, it's in the bios to disable it so...
Thxxxx Ur a god!!!!!!1111
TechieShu why isn’t it working... I followed ur steps 😕😕 when I entered the pass code number and I pressed enter I got the issue again please help!!!!!!!!!!!!
Thanks a bunch man . And guys i did it on 7.14 v. Its working. 😘
Thank you for the video. My problem is with F10. I get to that red warming window but I cannot use F10 and can only use ESC. hence, the option is never saved. I cannot save any options in BIOS. F10 is disabled and have not been able to get it back. Any ideas please?
New keyboard?
i system is HP Pro 3300 Series MT motherboard is foxconn 2abf and bios is ami 7.11 2011 i tryed another card and on boot it said press esc for startup and nothing worked and pc started beeping then it went to a black screen with the system information and card information and just stayed on the screen and i took out graphics card and booted fine do u know what graphics cards are compatible so i dont need to update bios.
Bro I'm facing 163 and 162 system configuration and date time not set instead I change cmos battery save changes and settings confirmation option not coming
Sir I bought gtx 950 but its not working if I do this work like you my card will work or not and this card is working in another systems
I don't have the secure boot option under security...
well try to look for it under any other options and if you cant find it anywhere in the bios, then you dont have this feature at all. But either way if you are trying to install a new graphic card and you dont have this option, its fine, you can just install it without doing anything in the bios. I hope this helps.
Papi Chulo Gaming I'm trying to install my gpu now, as we speak. But, when I start it up, my pc starts beeping and doesn't boot up. Without the gpu, pc works fine.
It's a Gt 730, my pc is running windows 7
do you have skype or facebook maybe we can video chat so i can help you. and do you have a on board video card because if you do, you have to disable that first in the bios.
Papi Chulo Gaming I have intel he graphics
Thanks and keep it up
My bios is the same as your but I don’t have the boot option and I need it
i got the HP 280 G2 but it wont let me access my old wdblue 500GB hard drive containing win7. any tips on tweaking the bios??
damn thanks u helped alot
Thanks so much for your help
hey have u ever try to replace ur stock Heatsink processoe fan? cause i got the error message if i replace my stock HSF or abandon one of two fan connector? cause i got same motherboard's manufacture like u, i bought all in one pc.. glad if u could help.. thx
love this video ❤❤❤❤
TechieShu yeah I disable the integrated GPU and plug it in the display port on GPU I get sound of windows coming on but screen no signal. I will try driver uninstall.
The UEFI firmware option does not show up in my advance startup settings. Please tell me how to do this without these settings or tell a way to show these settings. Please
Did you figure it out? I have the same problem.
Ooh yeses, it's good my friend
Thanks sir, I have don it and it worked
It goes to preparing automatic repair and then never loads
Keostyn Rojas Did you find a solutian?
Thank You
That is working for Foxconn 2abf?
2:27 in the last with me only system security no have security Boot configurations i hop somebody solv my problem please 💔😭
Amin Jan my PC (HP) please tell me how to solve this problem
Amin Jan oh my god but i will take it to PC shop mebey will. Solved
update bios
Legacy does't show above secure boot on an hp 19-2113w.
In my compaq 6300 pro too
In my hp 3400 too
Thank you 👍👍👍👍
Does this work on windows 10?
Pro I want to enable achi how my biso is the your biso them
Pc not getting asked for any key
This was helpful yo
Work for Windows 10?
Men mine is asking for a password to set up my computer in still getting black screen
i have hp 8200 elit i can torn of f1 boot 😵💫😵💫😵💫😵💫 plizz help wind 10
Hey... My HP 280 G1 crashes when I try to update drivers immediately after installijg win 10.... The error code displayed is DRIVER POWER STATE failure what might be the solution to this as it has happened everytime
Did u try doing windows 10 clean install and did u updating your bios? Also make sure your hdd in bios is set to ahci.
How did you enter those keys
Thanks bro
How to disable autoboot when windows 100% install then reboot and then again installaltion start
?
take out ur usb before it reboots
How to OVERCLOCK CPU in this bios
Hey man I forgot to do this and Install the drivers for the gpu u was going to install my computer is a hp Envy h8 1414 and now when it boots it freezes I also added new ram but then I install all the old components back in and it still freezes when booting any ideas
Try going back to your original components and do the bios step first then upgrade see how it works
Pls fix this legacy boot is hide
Can i increase my vram on my intel hd 2500 with this options
No you can't. There's no way to increase vram capacity unless u get a new GPU with higher vram.
i dont have a secure boot option in my bios what am i going to do??
Did you find a solution
Bhai HP computer me window s 10 install kaise Kate bataye please
Hello! Can you help me with my hp 4000 compaq pro? I need an advice.
Hey, how may I help u?
@@techieshu9553 recently, i tried add some RAM for my pc, this is kingstone 1333 2x2gb i want receive 4gb but after added this items my pc not on correctly, he is make alarm signal and to light red LED
i though it's because my bios is not upgraded, i right?
@@uragan_27 yes either that or you have to reseat it correctly. You pc supports up to 8gb so you should be fine. Lmk when you reset and push down the Ram properly.
@@uragan_27 also which version of ddr is it? Ddr1 or ddr2?
@@techieshu9553 my pc with ddr3
After format system showing boot mgr missing
i dont see secure boot confuguration
When I save changes I still have my secure boot but what can I do
Try resetting the bios, clear CMOS battery and try the process again
@@techieshu9553 Tysm
Keyboard and mouse stops working whenever i boot in a pendrive , how to fix this?
Is it wireless?
@@techieshu9553 no
Hi..I have a HP Pavilion 500-319na with an upgraded psu. It has a Memphis-S motherboard. Would I be able to upgrade to GTX 970 if I do what you done in your bios? I heard some people saying some graphics cards are UEFI only. Will enabling legacy support bypass that?
Patrick F I am pretty sure it will try it out nothing bad will happen by experimenting
I havr the same motherboard and tried this and its already set to LEGACY : Enable
Secure Boot: Disable
I wanted to upgrade to 1050ti which has uefi setting so im still hesitating to buy the gpu
Hi guys! I have a problem with my HP h8-1151cs desktop computer. My motherboard is IPISB-CH2, it work with 550ti like a charm, BUT when I try to replace with gtx 1050 ti, it's freeze on splash screen... What should I do? Please HELP ME!!!
did U manage to get it fixed?
how to desktop fomate core i7. i dont know how set a bios setup so plz help me
Can u explain this a bit more I am not understanding what you are asking, you dont need a os to go into bios.
This is a long shot, but can you still tell me what BIOS version was installed in this video's machine? I have a similar PC and need to disable Secure Boot to install an old graphics card, but my BIOS does not have that option! Thanks.
Do you have the same exact motherboard? U can try to see in the motherboard website or the support page to see a updated bios file and if not then I guess u have no choice but to try adding the gpu without disabling secure boot. It should technically work without having such options.
@@techieshu9553 First, thank you for still commenting on a 5 year old video. Found that HP did not provide a BIOS update with Secure Boot for desktop PCs that were manufactured with Win 7 or earlier. I suppose yours came with Windows 8? The reason I need to manage Secure Boot is that now this PC runs Linux, and the graphics card does not run, blank screen. All solutions for this that I found point to Secure Boot disabled as the solution. If that is not possible on this PC, guess Ill have to stick to the onboard graphics.
@ yea it came with windows 8. But even so I am pretty sure you can still add any gpu to it as long as you put the right power supply. So try it out.
@@techieshu9553 think its possible if the machine is running the original Win7, something to do with signed software. But I formatted and installed Ubuntu. Now there's a blank screen (from both the discrete and the onboard graphics) if the discrete graphics card is installed. Remove it, reboot and everything is fine. A video from Linus Tech Tips actually demonstrates that these older machines are still pretty usable with just a GPU upgrade. Far cheaper than getting a new rig, and later on, if you do, just salvage the GPU onto that one. This is what I was trying to do.
@ any particular reason for running Ubuntu? Why not go with windows 10? U can get a windows 10 key from ebay for like $3
Setting not saved
Vt enable kese kru same buos h
thank you
How to make settings red
Why I have not Secure Boot Configuration in BIOS? I am use HP Compaq 8200
Did you find a solution
@@techinhd3993 yes, the reason is 8200 is too old.
@@cyl1040 so in the end what did you have to do?
I asked Microsoft, they told me to enter some command in the Windows' install screen(cmd window)
But when I open there was no efmi option available please help me
What's efmi?
Hey bro, i don't have the secure boot in the bios i updated the bios to 7.16 and it still not showing
That means secure boot was never implemented in your computer. What are you trying to do that u want to disable secure boot?
@@techieshu9553 yes
Appreciate this
Thanks
plz help i can't update bios
how do i get into my bios if I'm restarting on a hp pavilion p-7 1234 desktop with windows 10? I can't even get to the desktop screen. helppp!!
the screen goes black
press del or f12 key lots of times or check which key to press to bring up bios once you power on the computer, if you need further help message me on instagram shu.wowz or google+
Thanks bro❤
No matter what I do it says no bootable device. I tried legacy and uefi
zakai pastor cam you describe your issue in detail? Are you trying to install a graphic card or something or windows?
Hello I have bought a house elite 8300 sff it's a 8gb DDR 3 Intel core i5 3470 with a 128gb SSD it had windows 10 installed onto it I bought a gtx1050ti after some research AVE read that the GPU works perfectly fine with the 240w PSU that the desktop computer comes with but I always ran into a problem as when I put the GPU in the pc wld boot up fine when the monitor cave was connected to the display port on motherboard but once I disabled intel integrated GPU off and switches to the display port on the GPU itself it won't work at all I tried going in to change the secure boot but I don't have the boot config I ended up wiping the drive to instal windows 7 ultimate that I have the genuine disk with genuine key but now I keep getting after 100% updates failed instal will now cancel what do I do now am I fucked ??
that shouldn't be happening but have you tried GPU driver uninstaller, its possible the intel graphic drivers are conflicting with it. Also the you display port connector is suppose to be connected to you gtx 1050 ti not to your motherboard. and of course your integrated gpu is suppose to be disabled. If you need further help contact me on google hangouts from RUclips channel.
Increse vram VDO please
Thanks!
should i do now or after plugging in the gpu
Turn on the computer and let the windows load default drivers for gpu then go to manufacturer website and download the latest drivers and install.
@@techieshu9553 No i mean the secure boot. Should i disable it before installing the new graphics card or after putting it in.
@@weakestpakistani9730 that depends on what type of computer u have. If u have the same one in the video sure. If not the same one I thjnk u should experiment do it with secure boot on and if it doesn't work turn it off like I showed in the video. Nothing will get damaged.
I have the same hp pc
Should i do this before i use my new graphic card 1050ti ??
Haider Al-Ghassani I dont think we have any chance on our gtx 1050 bro
Rhonmark S. Thanks
I updated bios and it's just work well
Haider Al-Ghassani do you have windows 10 or 8?
Haider Al-Ghassani did you follow what he does on the video?
Haider Al-Ghassani yes you should do this before installing your gtx 1050 or any graphic card in general
I don't know thy but it says no boot disk has been detected or the disk has failed
well you should check if your hard rive or other boot devices are working properly
Daniel Gorelik you get fixed?
Thank you
Why my bios dont have that option?! Hp pro 3400 i3
Hi did you find any solution since then ? Same problem here
Are you having a seizure? Im about to throw up from all the camera motion.
lol uk how long ago i made this video
❤❤❤❤🌹😹 thx you v.much 2021😂😂
I don't have UEFI Firmware settings.......what should I do???
Dio you find a solution
@@techinhd3993 yup guess what my processor is very old :/
Bro how to OVERCLOCK CPU in this SHIT BIOS 😠😠
Hello, Are you able to change your VRAM with that BIOS?
No vram is already pre included in a your gpu, it cannot be changed.
@@techieshu9553 can you be able to flash or update it so that you're able to change
@@dantonnirvana8608 you can flash or update to a new version that may or may not have option of secure boot not so sure but also what are your trying to achieve?
@@techieshu9553 I want to be able to change the dedicated video memory
@@dantonnirvana8608 u can't, you are stuck with whatever amount your gpu comes with unless you buy a whole separate gpu with more or less vram
Guys help i did that and my PC stop working
bhai uefi wala option nahi aa rha hai
Thank you I am brazilian
@Desmonetização assiste o video de novo e de novo ate dar certo eu fiz isso
@Desmonetização blz se der certo manda um obg