I recently got a vacuum form 3D bezel mod from Etsy. It looks a lot like yours, including the extended detail. Don't know it's the same artist, or not. But, yeah. It makes the cabinet really pop! I still need to get a plastic coin door, and do the snap on marquee, but mine looks "ok", for the time being. Thanks for sharing this.
Yea, honestly i believe the guy used my idea. He mentioned in video he talked to community and i remember sharing my photos. If i had a 3d printer or something i would have liked to sell my version but felt weird using the other guys version fir my modded design. Oh well
@@ThomasGrillo yes he did do that but he said he used the guys 3D printed version that i have, vacuum formed that and added the extra parts from idea after he saw my photos of it.
Just ordered the 3 piece bezels. Will hide the screws. Looks like he made all the improvements you mentioned, just have to cut off over flow plastic. Great tips, thanks.
@@FROSTINATOR Take look at it on the Etsy link you provided. It has the additional part at the top like your prescription bottles and the bottom part has the curve to fit going unto the panel. You added that bottom piece and trimmed them at angles to fit. If I knew you I'd order you the set and send it to you. Thanks again !
I've bought lots of colors of this masking tape. Stays on great! As for the coin door I was in the right place at the right time on the facebook a1up modding group where a guy was selling his. I have seen them on ebay. pricey though.
@@FROSTINATOR Yeah beats me as to why A1up are not even selling those coin doors themselves, they would sell a lot but of course, they don't, so go figure !
@@FROSTINATOR Nice thanks ! I have a real double coin door I am thinking of installing on my SW unit that should cover the old artwork where all 3 movie titles are showing up like you did, which I always thought these logos we're distracting from the rest of the artworks. Its just that its a 200$ coin door with real mechs that I would prefer using on my other real full size cabs but since i cannot get an A1up version, i might as well slap a real one on there, it will have a killer look for sure. I love your 3D bezel and found one guy who's selling it right now but he does not ship to Canada, sad. I emailed him we'll see if he can sell it anyway. And i got that vinyl pinstripping from amazon, i'll have it next week, I'll let you know if it looks good.
![Noob To Max With DRAGON REWORK In Blox Fruits [FULL MOVIE]](http://i.ytimg.com/vi/LnBMOinoOvA/mqdefault.jpg)
I recently got a vacuum form 3D bezel mod from Etsy. It looks a lot like yours, including the extended detail. Don't know it's the same artist, or not. But, yeah. It makes the cabinet really pop! I still need to get a plastic coin door, and do the snap on marquee, but mine looks "ok", for the time being. Thanks for sharing this.
Yea, honestly i believe the guy used my idea. He mentioned in video he talked to community and i remember sharing my photos. If i had a 3d printer or something i would have liked to sell my version but felt weird using the other guys version fir my modded design. Oh well
@@FROSTINATOR Actually, I think used vacuum forming on a form that might have been 3D printed.
@@ThomasGrillo yes he did do that but he said he used the guys 3D printed version that i have, vacuum formed that and added the extra parts from idea after he saw my photos of it.
@@FROSTINATOR Ah, ok. Explains things, then.
Nice work, may the force be with you 👏🏻👏🏻👏🏻
Looks great!!
Just ordered the 3 piece bezels. Will hide the screws. Looks like he made all the improvements you mentioned, just have to cut off over flow plastic. Great tips, thanks.
Idk, you mean the plastic around the piping on that sits on control panel parts?
@@FROSTINATOR Take look at it on the Etsy link you provided. It has the additional part at the top like your prescription bottles and the bottom part has the curve to fit going unto the panel. You added that bottom piece and trimmed them at angles to fit. If I knew you I'd order you the set and send it to you. Thanks again !
Where did you get you A1up coin door ? I want one....let me know cheers !
Both version have different price range version 1 $45 version 2 $75
What kind of black masking tape are you planning to use to cover those blue T-moldings ?
www.walmart.com/ip/Duck-Brand-Black-Masking-Tape-0-94-in-x-20-yd/146302940
I've bought lots of colors of this masking tape. Stays on great! As for the coin door I was in the right place at the right time on the facebook a1up modding group where a guy was selling his. I have seen them on ebay. pricey though.
@@FROSTINATOR Yeah beats me as to why A1up are not even selling those coin doors themselves, they would sell a lot but of course, they don't, so go figure !
@@longann7560 huge missed opportunity. I posted the links too just now for the other stuff. Forgot to do that
@@FROSTINATOR Nice thanks ! I have a real double coin door I am thinking of installing on my SW unit that should cover the old artwork where all 3 movie titles are showing up like you did, which I always thought these logos we're distracting from the rest of the artworks. Its just that its a 200$ coin door with real mechs that I would prefer using on my other real full size cabs but since i cannot get an A1up version, i might as well slap a real one on there, it will have a killer look for sure. I love your 3D bezel and found one guy who's selling it right now but he does not ship to Canada, sad. I emailed him we'll see if he can sell it anyway. And i got that vinyl pinstripping from amazon, i'll have it next week, I'll let you know if it looks good.