Great video! I’m considering using one of these high quality clutches as part of an electric start for My Ryobi 900 Propane Generator. We add an electric start system to the 1.5HP 40cc (60-70psi of compression) and the one way bearing assembly we use is making a lot of noise. We are now considering the use of a clutch, which may be a quiet solution once the engine is running. The clutch itself would only engage when the starter motor is spun. Mounting the centrifugal clutch to the starter motor, and the clutch housing which engages upon higher rpm, to the engine flywheel assembly. It’s the opposite of how a centrifugal clutch is often applied, however may work well for our application.
its sure will make it lighter with all thoes holes but it will comprimise the intergraity ,, the rest of the video was great and good information for sure
A different spring will change what rpm the clutch engages at. For example, if you feel your clutch is engaging at too low an rpm, you might want a stronger spring to keep the shoes from engaging too early.
i have a heat damaged. clutch who's spring has lost a bit of its tension i need a new clutch. or a new spring. can anyone suggest me a idea my go kart is engaging when i start it..
Can you please explain to me the purpose of altering that clutch and what that particular application will do for the minibike , or what ever that clutch is for. I'm really not mechanically inclined and I would be much appreciative if you can explain that to me.
I have a question, on bicycles between the gear teeth are more pedal reaches more speed. Now if I change the gear to cluch by the star that leads the spoiler bar tires and I put Star cluch to the bar this would reach more serious speed or slower. but I am new at this I just finished my courses in welding and cnc machines and have many things that come to mind and before to spoil the best parts wonder.
My clutch is belt driven, but looks interchangeable w/ this chain driven type, correct?? They go for $60 at TSC, wish I'd gone ahead & got it. Thanks for sharing this, take care from Tn.
In the sprocket part is the brass bushing suppose to be sticking out of the back some? Or is it flush with the front part? I took mine apart and it kinda got messed up and I think the brass bushing has moved some.
Señor muy buenas noches muy bonito su video mi nombre es Yen Noriega, estoy construyendo un Drift Trike quisiera me ayude para moder construir un embrague que materiales necesito y mas medidas o donde lo podria conseguir gracias de antemano saludos desde Peru.
hello sir.., I am planing to use this clutch in my fuel efficient car...do you have any idea about its efficiency....weight reduction idea is best...i will definitely implement that.
i have a max torque clutch and the bike has sat without running for around 6 years when you pull the throttle it doesnt want to grab at all it has been oiled but still nothing happens , please help
Black spring does not go in that easy for the layman after they've done half a million like you maybe it's easy that someone who's done it like three or four times and failed and cussed you out to no end it doesn't work that way old man
Such a clear demonstration and explanation of what you are doing with this clutch assembly. Well done. A good teacher. I know more now, thank you.
My eyes went what,,,, very quick installation for clutch...especially the 1 inch pvc.. 👍 great video..
Do you know where he got the spring for the clutch?
Thank you. I've been struggling with reassembly for 60 minutes
10 thumbs up!I just watched a vid where the guy struggled... with a helper to get that spring in properly. You made it soooooo simple. ThanksWM
perfect example of a correct demonstration. well done! Thanks
Great video! I’m considering using one of these high quality clutches as part of an electric start for My Ryobi 900 Propane Generator. We add an electric start system to the 1.5HP 40cc (60-70psi of compression) and the one way bearing assembly we use is making a lot of noise. We are now considering the use of a clutch, which may be a quiet solution once the engine is running.
The clutch itself would only engage when the starter motor is spun. Mounting the centrifugal clutch to the starter motor, and the clutch housing which engages upon higher rpm, to the engine flywheel assembly. It’s the opposite of how a centrifugal clutch is often applied, however may work well for our application.
Thanks Jim! Excellent Instructions
Thanks this video helped a lot
Thank you for the video
Excellent video
Like a BOSS 😊
Thank you so much I took mine apart it flew apart I was wondering how the hell I was going to get that spring back in awesome video
its sure will make it lighter with all thoes holes but it will comprimise the intergraity ,, the rest of the video was great and good information for sure
This will be very helpful when I replace the cemtrifungal clutch on my gokart. Thanks!!!!!!
Best tip I've seen in a long time!!!!
Thanks 4 the info 🇺🇲
'thanks so much for your clutch spring installing tips.
it was a great help..........Joel
Great presentation and info! Thanks!
Thank you I finally understand how clutches work
A different spring will change what rpm the clutch engages at. For example, if you feel your clutch is engaging at too low an rpm, you might want a stronger spring to keep the shoes from engaging too early.
i have a heat damaged. clutch who's spring has lost a bit of its tension i need a new clutch. or a new spring. can anyone suggest me a idea
my go kart is engaging when i start it..
nice job //////// Gotta luv old school
Wow perfect! Thanks!
excellent video !
great video
Colonel Potter?
From MASH 4077?
There should be a set screw on the clutch that you need an allen wrench to loosen up. Loosen that up, and it should pop right off.
I’ve been working on getting the spring in the shoes for 4 hours
Masterfull!!👌👌👌
Thanks! Worked great!
Thanks now I know my clutch inside and outside
Do you know where he got the spring for the clutch?
@@NATHAN_SIMPSON same
We thank you too.
will a new clutch smoke some when used for the frist time ????????
Can you guys make a video of cutting the shoes so there are 9 then install?
Can you please explain to me the purpose of altering that clutch and what that particular application will do for the minibike , or what ever that clutch is for. I'm really not mechanically inclined and I would be much appreciative if you can explain that to me.
I have a question, on bicycles between the gear teeth are more pedal reaches more speed. Now if I change the gear to cluch by the star that leads the spoiler bar tires and I put Star cluch to the bar this would reach more serious speed or slower. but I am new at this I just finished my courses in welding and cnc machines and have many things that come to mind and before to spoil the best parts wonder.
I have to ask how many takes there was during filming? Lol thanks for the good info, you make it look so easy!
very helpful
My clutch is belt driven, but looks interchangeable w/ this chain driven type, correct?? They go for $60 at TSC, wish I'd gone ahead & got it. Thanks for sharing this, take care from Tn.
In the sprocket part is the brass bushing suppose to be sticking out of the back some? Or is it flush with the front part? I took mine apart and it kinda got messed up and I think the brass bushing has moved some.
Señor muy buenas noches muy bonito su video mi nombre es Yen Noriega, estoy construyendo un Drift Trike quisiera me ayude para moder construir un embrague que materiales necesito y mas medidas o donde lo podria conseguir gracias de antemano saludos desde Peru.
Do you know how to take the pulley off of a drum?? Looks like just a press fit.
I know I’m extremely late but where did he get that spring for the clutch?
hello sir..,
I am planing to use this clutch in my fuel efficient car...do you have any idea about its efficiency....weight reduction idea is best...i will definitely implement that.
great!!!!wow!!!
I thank you sir for such a nice video,,,now I can fix the thing w/o going nuts....=+)
POR QUE NO ESTAN TRADUCIDOS AL ESPAÑOL LOS VIDEOS PARA ENTENDERLOS?
hello please I need that clush
i have a max torque clutch and the bike has sat without running for around 6 years when you pull the throttle it doesnt want to grab at all it has been oiled but still nothing happens , please help
SO WHERE IS THE BEST PLACE TO BUY A YELLOW SPRING? I NEED ONE
where do i get the maxtorque spring please reply
I have an extra clutch can it be modded by dropping out the teeth and welding on a v belt pulley?
where do I get the heavier black spring? thank you..
I took that first ring off and in won't come off?? I need help
I don't see why you need to screw the drum to the board. Seems like it will stay in place just fine.
How long is the spring in cm?
very nice.my clutch is a #35 with 12t.from amazon.does that mean i need a # 35 chain?
yes
Thanks
donde lo puedo comprar
Do you guys sell 7/8" bore Centrifugal clutches? i have a go kart that needs a clutch
how do i remove a clutch like this from the drive shaft ?
so, a harder spring is much better ???
A firmer spring will make the clutch engage at a higher RPM which may be better from a performance perspective.
Kool
I mean this video for 6 years old very clear
where do ya get that spring??
Bmi karts
Trying this once i get 62 gram shoes and yellow spring in the mail
If the hole in the board was bigger you wouldn't have to take the gear off the drum.
Black spring does not go in that easy for the layman after they've done half a million like you maybe it's easy that someone who's done it like three or four times and failed and cussed you out to no end it doesn't work that way old man
yer tip of the week you only have 1 vid and i can make my cluch way eser and it works better than that
Excellent video