these are quite common over here and they are really budget oriented, really glad they made it on to the channel ! excellent build as always ! really appreciate the music in cinematic mode, makes me feel like walking in night city !!
I use a Montech case and they are very nice at a really budget price. I have been using their case for over 2 years now and I would recommend them. I plan on upgrading to the Air 1000 case soon because the new model has improved removable dust filters from the front and bottom. They look much easier to remove and clean compared to my older model.
It’s amazing to see what Montech cases have achieved in terms of features, quality & pricing 🥰👍🥳. I personally love a number of their cases and how quickly they come on the seen with the variety of cases they have. Great job Montech 🥰👍🍻. Sweet build Nick as always 👍😆.
Been using montech for about a year or so now. They're pretty good. They do make some pretty cheap stuff that's junk (all molex fans making a long cat in the back) but also their nicer stuff $70-$100 price range is pretty good.
Had gotten a Montech X2 Mesh for the kids, it is surprisingly pretty solid. The only real downside is the 3 RGB included fans are molex. Excited to see what this one has in store.
I've been building everything lately in Montech cases, the 903 Max and the 1000 Premium. I like the classic layout, and I'll be running mine only without the inner front filter. No fish tanks for me -- unless I decide I want an actual fish tank.
The only issue with this case is the front dust filter which is so close to the fans, impeding air flow. I would probably try to find a way to remove it and work on the hole on top.
I just built my pc upgrade in this case for the first time in 8 years. For the life of me I couldn't figure out how to get the pre built fans to spin. The fans light up and all but no matter what I did the fans wouldn't turn on to spin. I found a little black cable connected with other similiar black cables that had to be pulled from the bundle of wires for the RBG and fans. I had to stretch that one little cable all the way through the front of the case to plug into my mobo. For the life of me why didn't you have to do this for the build?
@@victoriancarwash4393 its a very far stretch and almost didnt make it to plug into my motherboard. Looks bad but works, temps are good too with glass on
@@PaulJohn01 There should be a small 4-6 pin white plugin labeled fan at the top of your motherboard. This was 5 months ago so I don't really remember.
Be nice to see some cases like this that only support atx and only have enough length for fans on top of the width of the board. So short front to back but still supporting atx and a aio height wise. Just have to use a shorter gpu. Less of a footprint on your desk without having to go full on itx build.
When you took the temps and mentioned removing the panels, was that the dust filter on the front as well or just the front mesh or glass panel? I was hoping to get enough air if i remove the mesh and glass but leave the dust filter in place
So, I’ve been looking around my case for days and I can’t find the 4 prong plug at all. I can’t power my fans. Any tips on where it could be? Edit: 4 prong female connector
@@PaulJohn01simply up plug all your fans and put the cords together. There will be connectors (3 or 4 prong) and connect it to there. After, you connect that to motherboard. 3 prong does work on 4 prong.
Just finished my build inside this case. Did not install windows yet, but when powering on the case, the case fans RGB light but the fans do not spin. Do they only kick on when it reaches a certain temp? Or could I possible have something unplugged
My girlfriend just bought this case for a Ryzen 5 5600G. She's not a gamer, but she wanted something that looked beautiful, so with no GPU, and she won't really push the CPU much, the thermals should be great for her. Also, one thing to note with your build. Isn't your AIO sucking in the warm air from the case to cool down the CPU? Instead of drawing fresh air from the front? That could be a huge factor in what that case could achieve in cooling.
Can you let me know how you got this case. Can't find it anywhere. Would you be willing to sell it. I've been looking for the past year for an all white case and settled for a older montech case last year. This is the case I had in mind but never found one like it. Especially all white with a pull door. Thanks. P.s. I've contacted their amazon, and New egg, email, customer support with no luck.
@@Idleplayer17 I think this channel is Australian, I've seen them in the UK and are available in the PH , links in the description below video ? US usually has largest selection so i'm sure somewhere there is.
@@IceniTotalWar there isn't any. I've checked all links. The customer supper got back to me saying only the black is available. So I'll have to wait for them to have it in stock again.
@@Idleplayer17 They have several models close in price point all in black/white. Most companies do a white version but they seem to be about $10 extra. Hope you can find what you're looking for but shipping prices are way up atm.
Hey Nick the temps suck in this case cause of the fans! I bout it and replaced the fans with Fractal Design Aspect 12 RGB And 3 of the 14s Wide range. Temps Down to 32c on 3900X and max 64c on 5700xt! Case Is AWESOME! Replace the crappy fans it come with!
Hello, buddy. Such a nice review, thanks for this content! What can you tell me about the material used in this case? Do you think it will get yellowed after some time, like low quality white plastic usually do? Another question is: Since the front dust filter is too dense, as you well said, do you think it's feasibleto to modify this mesh for a better one? Thansk again, mate.
I thought like you that the white material will turn yellow after a long time of use, but I think it might not be what you think because it's not plastic.
I liked the look of the case. I'll build a pc and I bought NZXT 510 Elite and everybody says it has bad airflow. Any recommendations for a case that is minimalistic and has good airflow. I'll have 5950x and 3080Ti btw. Thanks!
It's just called air because of the mesh supposedly lending to better airflow than the glass panel. If anything, it helps the AIO. Lol. It's 2021, nobody uses air coolers anymore besides people with SFF builds.
Just got this at the store to build my pc, mine dont have those front noise like yours when touching it,very steady. Yours sound very thin cheap metal. Unlucky you.
these are quite common over here and they are really budget oriented, really glad they made it on to the channel ! excellent build as always ! really appreciate the music in cinematic mode, makes me feel like walking in night city !!
So glad you review Montech’s case. Their cases are so underrated !
They have the ideas on the right places. Liked the case a lot.
I use a Montech case and they are very nice at a really budget price. I have been using their case for over 2 years now and I would recommend them. I plan on upgrading to the Air 1000 case soon because the new model has improved removable dust filters from the front and bottom. They look much easier to remove and clean compared to my older model.
It’s amazing to see what Montech cases have achieved in terms of features, quality & pricing 🥰👍🥳. I personally love a number of their cases and how quickly they come on the seen with the variety of cases they have. Great job Montech 🥰👍🍻. Sweet build Nick as always 👍😆.
Been using montech for about a year or so now. They're pretty good. They do make some pretty cheap stuff that's junk (all molex fans making a long cat in the back) but also their nicer stuff $70-$100 price range is pretty good.
I own Montech Air X. It’s amazing for its price !
Oh my. You got cables to actually make the front of the founders edition actually look decent with the cables. Subscribed.
Really nice looking case I just wish it had USB-C port on front IO.
Such a beautiful case. And it’s all white... Love it !
Ok this has made me excited for this case. i just bought this(currently waiting for it to be delivered) this review helped me out alot
How's it?
Fiquei surpreso em ver que não houve grande diferença de temperatura entre o vidro e o mesh. Parabéns pelo review.
Awesome video fams, case looks pretty good for what it is from a company I haven't hear of either
This is the first time I have seen a 30 series Nvidia founders edition card gpu power connector that does not look like its from the bargain bin.
Had gotten a Montech X2 Mesh for the kids, it is surprisingly pretty solid. The only real downside is the 3 RGB included fans are molex. Excited to see what this one has in store.
@@ejaya2 I currently have the x2 mesh, I’m thinking about getting this Air1000 premium, is it a good upgrade choice?
The point about vibration seems fairly moot, considering it isn't audible until you actively tap on it.
parts you used in this case are clean af ! nice as always man
Awesome case fams. Definite 4000D vibes. Great work!
holy crap, I can’t believe i’m seeing you guys again 😭❤️ I had to refollow and turn on notifications! Hope all is well with you and the Mrs 🙏🏽✨
These white builds are really nice. Time to change up my black build
What case you got now?
i'm surprised that fractal didn't think do that front mesh dust filter like that. which brand of Cable Extension are you using?
Cablemod
i think i watched this video 10 times, the build just looks so good
Underrated cases 👍
I've been building everything lately in Montech cases, the 903 Max and the 1000 Premium. I like the classic layout, and I'll be running mine only without the inner front filter. No fish tanks for me -- unless I decide I want an actual fish tank.
Really enjoying white cases that have a white "bezel" on their tempered glass side panels
Always bothered me when they were black
i’m with you on that
Preach bro
Build = Sublime
Music = Fire
I'm still wondering why the 120mm rear fan is at the top but he pulls it down because it's attached to the water cooling system?
Great video! Would be nice if you showed it with the tempered glass as well for the B-roll since you have it so might as well.
It's clear. It literally looks no different to it not being on
The only issue with this case is the front dust filter which is so close to the fans, impeding air flow. I would probably try to find a way to remove it and work on the hole on top.
I just built my pc upgrade in this case for the first time in 8 years. For the life of me I couldn't figure out how to get the pre built fans to spin. The fans light up and all but no matter what I did the fans wouldn't turn on to spin. I found a little black cable connected with other similiar black cables that had to be pulled from the bundle of wires for the RBG and fans. I had to stretch that one little cable all the way through the front of the case to plug into my mobo. For the life of me why didn't you have to do this for the build?
planning to buy this case so ill keep this in mind
ps. im an absolute pc noob
@@victoriancarwash4393 its a very far stretch and almost didnt make it to plug into my motherboard. Looks bad but works, temps are good too with glass on
Just got this case and have same problem, is it the cable marked ARGB Input ?
If so where on your MB did you connect it ?
@@PaulJohn01 There should be a small 4-6 pin white plugin labeled fan at the top of your motherboard. This was 5 months ago so I don't really remember.
@@MerchwithDan Thanks a lot 👍👍 yep managed to find it , fairly easy to reach my MB but i haven't done any cable management yet, appreciated.
how to control argb lights of the fan using software?
Be nice to see some cases like this that only support atx and only have enough length for fans on top of the width of the board. So short front to back but still supporting atx and a aio height wise. Just have to use a shorter gpu. Less of a footprint on your desk without having to go full on itx build.
Their stuff kind of reminds me of the lower budget cases from Apevia. Maybe that's just because my current tower is an Apevia.
Nice looking Case - Nice Build! Thanks.
(Must have missed this one when it came out - the video that is).
When you took the temps and mentioned removing the panels, was that the dust filter on the front as well or just the front mesh or glass panel? I was hoping to get enough air if i remove the mesh and glass but leave the dust filter in place
So, I’ve been looking around my case for days and I can’t find the 4 prong plug at all. I can’t power my fans. Any tips on where it could be?
Edit: 4 prong female connector
Same problem here, did you ever figure it out ?
@@PaulJohn01simply up plug all your fans and put the cords together. There will be connectors (3 or 4 prong) and connect it to there. After, you connect that to motherboard. 3 prong does work on 4 prong.
@@syrenity64 Thanks a lot, yep found 1 unconnected 3 prong female that i could hookup to the MB fan header 👍👍.
Thanks for replying.
How do the fans get power? Also can you control the speed?
Just finished my build inside this case. Did not install windows yet, but when powering on the case, the case fans RGB light but the fans do not spin. Do they only kick on when it reaches a certain temp? Or could I possible have something unplugged
Same problem, did you figure it out ?
Do a test where you tape up the mesh openings on those fans!
But the video is already done 😂
My girlfriend just bought this case for a Ryzen 5 5600G. She's not a gamer, but she wanted something that looked beautiful, so with no GPU, and she won't really push the CPU much, the thermals should be great for her. Also, one thing to note with your build. Isn't your AIO sucking in the warm air from the case to cool down the CPU? Instead of drawing fresh air from the front? That could be a huge factor in what that case could achieve in cooling.
Can you let me know how you got this case. Can't find it anywhere. Would you be willing to sell it. I've been looking for the past year for an all white case and settled for a older montech case last year. This is the case I had in mind but never found one like it. Especially all white with a pull door. Thanks.
P.s. I've contacted their amazon, and New egg, email, customer support with no luck.
What country are you in ? they're available in white in the Philippines. I plan on getting black version. About $80 currently.
@@IceniTotalWar I'm in the US
@@Idleplayer17 I think this channel is Australian, I've seen them in the UK and are available in the PH , links in the description below video ?
US usually has largest selection so i'm sure somewhere there is.
@@IceniTotalWar there isn't any. I've checked all links. The customer supper got back to me saying only the black is available. So I'll have to wait for them to have it in stock again.
@@Idleplayer17 They have several models close in price point all in black/white.
Most companies do a white version but they seem to be about $10 extra.
Hope you can find what you're looking for but shipping prices are way up atm.
Great review mate, keep it up!
4 pre-installed fans for this price is awesome
7:27 Lmao 🤣🤣🤣🤣
Of course I buy the z 63 in black and now I see that it's in white. I could return it but I'm too lazy to take it out now. Great build btw!
Is it better than the Corsair 4000D airflow?
amazing case i like the dust filter all over the case it is important
Are the fans rpm controllable?
1:27 My Corsair 5000D Airflow has the same hooks top and bottom, so not sure what you are referring to here.
It doesn't use hooks on the bottom. It uses 4 clips
Is Arctic liquid freezer II 280 radiator can fit on top?? Thanks
Where do I buy this in Canada? I looked on the website but doesn’t seem to have anywhere to purchase there.
Are the fans 3 pin or pwm
Cool gif on that kraken z63 how can i apply this.
Hey Nick the temps suck in this case cause of the fans! I bout it and replaced the fans with Fractal Design Aspect 12 RGB And 3 of the 14s Wide range. Temps Down to 32c on 3900X and max 64c on 5700xt! Case Is AWESOME! Replace the crappy fans it come with!
Ya'll gunna act like you didn't see that tongue action on the screen reflection during the AIO install?
i had to do a double take... "did i just see what i think i saw?" it's good to know i'm not the only childish one on the interwebs.
@@cwfromlnj Same! I scanned all the comments and was like, ... bro, I know someone else had to have seen that! XD
Hello, buddy. Such a nice review, thanks for this content! What can you tell me about the material used in this case?
Do you think it will get yellowed after some time, like low quality white plastic usually do?
Another question is: Since the front dust filter is too dense, as you well said, do you think it's feasibleto to modify this mesh for a better one?
Thansk again, mate.
I thought like you that the white material will turn yellow after a long time of use, but I think it might not be what you think because it's not plastic.
What cable extensions do you use?
Cablemod i believe that's the most common brand i see.
I liked the look of the case. I'll build a pc and I bought NZXT 510 Elite and everybody says it has bad airflow. Any recommendations for a case that is minimalistic and has good airflow.
I'll have 5950x and 3080Ti btw.
Thanks!
Is Montech AIR 1000 better than MATREXX 55 MESH?
what about price?
@Gear Seekers can you guys do a lian li air mini black build
You got any spare gfx cards you’d be willing to sell?
nope
This case is impossible to get in the UK
Because it’s unreleased lol November it will be available
I have to question the validity of the thermal testing after seeing gamersnexus' results though
Different ambient temperatures, different hardware. A completely different setup.
Hi! Nice build!
Should be much improved with higher static pressure fans.
my case only has 4 screws with it wtf
"AIR" case. Let's water cool it.
It's just called air because of the mesh supposedly lending to better airflow than the glass panel. If anything, it helps the AIO. Lol. It's 2021, nobody uses air coolers anymore besides people with SFF builds.
@@kasper_429 but but.. I still use the Noctua D15s :(
@@EpicFudgemuffin Lol I didn't say it was a bad thing. Just rare to see anyone use air cooling in a "regular" build anymore. Lol.
Waw Amazing PC 😍😎
Just got this at the store to build my pc, mine dont have those front noise like yours when touching it,very steady. Yours sound very thin cheap metal. Unlucky you.
@@joyyahoo maybe you got the new version
7:27
dang is this a cousin of a 4000D?
I wasn't even caring about the video
I just dropped the like
Legend!
At least they used white cable grommets, Corsair have ugly black ones
I’m guessing it’s difficult to get a good color match with white silicone/rubber. My O11 mini comes with light grey ones.
Muito bom o video
What? No white gundam gpu?
Ay, my friend 😂
Something different
Looks like they copied the 4000D.
wow :0
cheap case stay away people
Give me the money for a more expensive case