For the canopy: HappyModel is now applying a small amount of E6000 glue (still removable) to the camera to keep it from falling backward out of the mount
You need to push the camera in further to click the canopy arms around the backside of the camera. The canopy isn't in view of mine. Mine came a bit dislodged like yours and would slide around until I clicked it in proper. A tiny dab of e6000 on the back of each arm has locked the camera in and prevented it from sliding out in crashes.
There are tons of 3d print files for canopies for the lux cam that offer more protection. I got this one and the mob 7 freestyle and this one is incredible. Until you fly the 7. That one is insanely good. I’d recommend
I did the goggles the opposite you; HDZ goggles and walksnail vrx, for 2 reasons. 1 better latency with HDZ and analog on the goggles. 2 Avatar vrx can do same as avatar goggles, but HDZ goggles can do more than HDZ vrx. Also for canopy situation, try switching parts to FractalEngineering 65 or 75. They have no props in view.
Thanks for the tips re the canopy. I'd have gone the other way and put a pre order in but then there wad issues with analogue etc and the caddx x were half the price AND I already had the OG Shark byte VRX. Hopefully this year I'll be able to snag myself pair.
I have Mobula6 Freestyle, camera holder is very flimsy. My camera lost focus and I am having hard time to adjust focus. The back of camera is not protected and the sticker protecting camera connection board came out.
All collaboration enquiries team@squadquads.co.uk
**Gear I Use**:
Mob6 hdzero Freestyle
s.click.aliexpress.com/e/_EwBvVLO
Caddax goggles
caddxfpv.com?aff=220
Radiomaster Boxer
radiomasterrc.myshopify.com/products/boxer-radio-controller-m2?sca_ref=6284294.c2QNdZhPRk
AG01 Gimbals
radiomasterrc.myshopify.com/products/ag01-cnc-hall-gimbals-for-tx16s?sca_ref=6284294.c2QNdZhPRk
Sub250 Oasisfly (5% off using Code SQUADDINGQUADS)
sub250.com/?ref=fdvsmeez
For the canopy: HappyModel is now applying a small amount of E6000 glue (still removable) to the camera to keep it from falling backward out of the mount
Thanks for the tip I'll get some ordered, such a great whoop it really is
Nice review. I liked your discussion of the goggles for new flyers. Honesty is a key value.
I just thought, especially at this time time of year it was an essential thing to mention so I'm. Really glad to read your comment thank you
You need to push the camera in further to click the canopy arms around the backside of the camera. The canopy isn't in view of mine. Mine came a bit dislodged like yours and would slide around until I clicked it in proper. A tiny dab of e6000 on the back of each arm has locked the camera in and prevented it from sliding out in crashes.
Hummm, no matter now much I push it it doesn't seem to click etc, I'll take another look though, thank you
Really enjoyed this, hdzero is now on my list for sure
It's great if you want high quality whoop footage that's also low latency
There are tons of 3d print files for canopies for the lux cam that offer more protection. I got this one and the mob 7 freestyle and this one is incredible. Until you fly the 7. That one is insanely good. I’d recommend
@@mwhizzler476 I'll take a look, thank you brother
@@squaddingquads getting 3 plus min flights on average with a webleed 450. Usually getting 2 mins with the mob 6 and tattu folded cell 300 mah bats
@mwhizzler476 jesus 😍
I did the goggles the opposite you; HDZ goggles and walksnail vrx, for 2 reasons. 1 better latency with HDZ and analog on the goggles. 2 Avatar vrx can do same as avatar goggles, but HDZ goggles can do more than HDZ vrx. Also for canopy situation, try switching parts to FractalEngineering 65 or 75. They have no props in view.
Thanks for the tips re the canopy.
I'd have gone the other way and put a pre order in but then there wad issues with analogue etc and the caddx x were half the price AND I already had the OG Shark byte VRX.
Hopefully this year I'll be able to snag myself pair.
Have you messed with the camera settings? Wondering if the 4:3 looks better
I don't personally think there is an issue with the image itself just the canopy - but I'll take a look now out of interest
💪💪💪💪
Damn that's uk shipping tax hits hard 😵
Made me cry but Mike at Hobby RC is a legend and the only UK authorised Hdzero dealer
I have Mobula6 Freestyle, camera holder is very flimsy. My camera lost focus and I am having hard time to adjust focus. The back of camera is not protected and the sticker protecting camera connection board came out.
You seem to have having the same issue I had :(