WAAD MAHADSANTAHAY WALAL QAALI AH WAXAN SAMEYA AMA DAYAC TIRAA MERCEDES CARS SMALL CARS RUNTII WEY ADAGTAHAY QOF INUU SAMEYO SIDAADA OO KALE WALAAL LAKIN WAA GADHI DONA INSHA ALLAH MESHA AAD JOOGTIDNA NALA WADAAG HADII AAD AAN KU IMAN KARO THANKS WALAL
@@BestCarFixes I downloaded the software. How do I get subscription to unlock the TCM and the connectors for the TCM that I want to unlock? Please help.
My 09 ML350 is not shifting gears and I think it’s the ISM. It reads “drive to workshop without shifting gears” on the dash. What do you think? Also, Can I buy one and send it to you?
Hi pls suggest what to do i have this error message p0606 component y3/8n4 fully integrated transmission control unit is faulty.. can i service or have to replace the sparepart
Thanks! My ESL was faulty, i decided to swap EIS,ESL and ECU of another c class c300. I swap my front SAM with the same part number. the problem is my transmission stop working and i am thinking maybe its because of the different EIS,ESL and ECU because the part number are not the same. My question is if i should virginized my TCM will it work with the parts i swap? secondly my car wont crank through the EIS EXCEPT through the green relay in front SAM. PLS WHAT CAN I DO? Thanks.
My car is R 300 Mercedes Benz 2010 was flooded with water and I have to take it to workshop but the how can I put the gear in N position to push the car
I have a 2015 Mercedes Benz c300 with no communication with the can net work. I checked all the fuses and are ok.12 volt😮 on pin 16. ground on pin 4 Can high is 2.5 volts. can low is 2.3 volts I have 62 ohms on pin 6-14 when the car is sleep. But anyway now I have a headache bc the car won’t crank I disconnect the power cables from the power distribution box in the front passenger side. I had the negative battery cable disconnected, I had a light build with two wires, the negative to the negative battery post and the positive to the chassis I was looking for the voltage dropped. So when I disconnect the last cable from the power distribution box and reconnect everything back on. Now I get on the dash a message that says. Something like service do not shift. I also see power steering logo on dash. The shift selector is not showing that it is in park. Any ideas what could had gone wrong? Thank you I’ll appreciate any feedback.
The Dealer told me my car, 2004 ML350, can not be fixed. The AAM went out and is now obsolete. Does you know a work a round because these computer are specific to each car and you can not substitute used parts. Great body , tires, interior, I need help!? Question, is it possible to bet the ECM, AAModule, and Body controL (kEY) module from a like can with like number and re-install them in my can, WILL IT WORK. oH, YES, DO I NEED THE TRANSMISSION MODUEL ALSO. THE DEALER WILL NOT TOUCH ANY USED PARTS. THERE ARE NO MECHANICS IN THE DALLAS AREA WHO CAN HELP ME. WHERE ARE YOU , ANYWAY?
i really need my car to get to work and i have spent so much money to replace the engine and transmission that when my battery died and i replaced it , my car goes into park and wont come out i just wanted to burn the car !!!, instead i saw your video and ordered a used ism thinking i coud reprogram it but for the life of me i cant find the "MB HASH" you talk about . please guide me to where i can get the software
Hi Mohammed, can IM608 renew VGS4-0 NAG2 installed in 2016 Mercedes-Benz C-Class C300 4MATIC Sedan? Whats the name of the application used in this video. I have a job on VGS4 that I need to work on in Ghana.
Hello Mohammed, so I cloned a VGS2-FDCT with KESS3. After cloning is there further coding or programming that needs to be completed when the kit it’s installed?
Hi Mohammed, thank you for the video. I did this installed the car drives and shifts every gear but it's a hard shift. Any advice would be great. It's a 2006 c230 722.9
Hi Mohamed, I’m stuck with my w211 E500 2005. My transmission (722.901) went away. I bought a used transmission same number and same car but 2006 (Siemens VGSNAG2) before installing we went for garage who said will virginize it then we install the transmission and ready that it will not move then we will go to program it but what happened that car moved smoothly and took all gears very nice so we never programmed it. After two days it went to limp mode with ABS and ESP alert. So we went to program it and we noticed that when we deleted the code which is p2037-4 the car is working again normally. So I decided to still program it. The guy said it’s programmed but I don’t trust because of all the above. Now car every day need to clear the code to move otherwise will keep in limp mode. What is your advice.
@@BestCarFixes so i wanted to ask you now if the TCM is programmed the vin number on the TCM will show the car VIN number or the old car that we took the transmission from VIN Number?
good evening. I am in Africa how can I have this tool. I am a mechanic and I dream to be able to perform this operation. What tool would I need? Thank you
Hi Mohammed the Great - You are a life saver l will need remote help with my Merc has issue with TCM error needs to be cleared l will pay call - Out Fee Am in South Africa - Johannesburg.
new subscriber here Mohammed nice video im having issues with my conductor plate tcm as well, did you confirm this method by installing that tcm on the vehicle?
What’s the minimum voltage. I lost data with tcm I’m only getting a reading on one of the 4 wires of the tcm connector, 9v engine off and 10v engine on
you install in the car and you are good to go, so to make it clear, I get a used transmission, I purchase the mbe connector kit, I install MBhash pay if I have to for tokens, unlock TSM install transmission on car and that's it. no reprograming to car.? Please let me know, I need to replace my R350 transmission, and I found a donor with 100K miles thats wrecked.
@@BestCarFixes can you message me I’ve been having issues with my 2003 Mercedes’ e320 and I’m thinking it’s the TCM I have another one coming from another wrecked car, will I need to reprogram it??
@@BestCarFixes Thank you so much, wasted time and money on the SVCI 2020. Appreciate it! Once this process is completed install trans and use STAR to finish coding?
I just purchased a 2007 Mercedes E350 the guy got a $2500 major tune up on the engine after having it for 6yrs He sold it after driving it for a week after the tune up he said it won't shift out of 1st gear what could be the problem Muhammad. How do I try and fix the problem myself please provide a video link or instructions. I do not have a OBD2 tester
Unlocking doesn’t matter if you don’t reprogramme it. A lot of people of asked you the same question about reprogramming and you never answer their question. What good does it do to go through all the effort to unlock something reinstall it if you have to reprogramme it?. Why don’t you answer peoples questions about reprogramming the conductor plate?
thank you for your question if you have the same part from the same transmission you just need to unlock it that is for all cars that I did if you unlock the engine computer that one needs to run the adaptation if you need more info please call me at +13472281875 Whatsapp
I'm learning about this. Thank you 👍
Women's like electronic but in car is new.
Keep teaching us Mister Mohammed.
i will do my best
Dear Muhammad Idres Thank you, I am Abdul Rahman from Muscat Oman Nice presentation Allah bless you
thanks
How can I get the tool and the softwear
You've reached greatest level of goodness to others sir. We in distant countries have benefited a lot from you. Thank you from Saudi Arabia 🙏🙏🤍.
Wow, thank you
@@BestCarFixessame respect sir ... Thks to being part of goodness ... Allah grant you rewards ...
This was done to my car. Back in Atlanta. Great work Mohammed
thanks
I like you. I have subscribed. May Allah bless you and increase your knowledge in all and every way.
I have p0705 apparently is a common issue, range sensor malfunction y3/8s1 it gets solved by cleaning the metal shavings and erasing codes.
Don't you have to program the unlock tcm with you car vin after in order to work?
did you get an answer to this question
WAAD MAHADSANTAHAY WALAL QAALI AH WAXAN SAMEYA AMA DAYAC TIRAA MERCEDES CARS SMALL CARS RUNTII WEY ADAGTAHAY QOF INUU SAMEYO SIDAADA OO KALE WALAAL LAKIN WAA GADHI DONA INSHA ALLAH MESHA AAD JOOGTIDNA NALA WADAAG HADII AAD AAN KU IMAN KARO THANKS WALAL
Great job , can you send us the name of the app and the bluetooth dongle
Genius!!! Thank You 😊
You're welcome!
Hello sir this is nice please how can I get the software and the plugs to Nigeria
@@BestCarFixes I downloaded the software. How do I get subscription to unlock the TCM and the connectors for the TCM that I want to unlock? Please help.
@@BestCarFixes Bro I really need to talk to you about my car. In memphis most shops are backed up 3 months
Hello i want to know coz my conductor plate speed sensor is cracked can i use it again or is there any way i can do it
What program or software do I use to unlock my tcm for sl550
هاد كود عطل عندي سياره ما تفك بريك. Component " Y3 / 8s1 ( Selection range sensor ) " was not taught in .
My 09 ML350 is not shifting gears and I think it’s the ISM. It reads “drive to workshop without shifting gears” on the dash. What do you think? Also, Can I buy one and send it to you?
What’s the best ECU/TCU cloning tool for Ford, Nissan, VAG and BMW Cars
I'm not sure there is Lot there ktag I believe is there for long times
Hello. Would it matter what version of the Vsg you use ? .for example if the car had the vsg1 would a vsg3 work to replace it with
Check with your car vin
Great job 👍
Thanks for the visit
Hi pls suggest what to do i have this error message p0606 component y3/8n4 fully integrated transmission control unit is faulty.. can i service or have to replace the sparepart
MashAllah!where are you located?After fitting in car have to input vin?
Brooklyn NY 11203 3472281875
Thanks! My ESL was faulty, i decided to swap EIS,ESL and ECU of another c class c300. I swap my front SAM with the same part number. the problem is my transmission stop working and i am thinking maybe its because of the different EIS,ESL and ECU because the part number are not the same. My question is if i should virginized my TCM will it work with the parts i swap? secondly my car wont crank through the EIS EXCEPT through the green relay in front SAM. PLS WHAT CAN I DO? Thanks.
its better to get EIS ambulator leave every thing as is no headache
My car is R 300 Mercedes Benz 2010 was flooded with water and I have to take it to workshop but the how can I put the gear in N position to push the car
Too good ..great 👍
Thank you! Cheers!
Can you used the tool to clone CLA transmission module
Hi sir please i wanna know how to connect it to the plug and to my topdon
I have a 2015 Mercedes Benz c300 with no communication with the can net work. I checked all the fuses and are ok.12 volt😮 on pin 16. ground on pin 4
Can high is 2.5 volts. can low is 2.3 volts
I have 62 ohms on pin 6-14 when the car is sleep.
But anyway now I have a headache bc the car won’t crank I disconnect the power cables from the power distribution box in the front passenger side. I had the negative battery cable disconnected, I had a light build with two wires, the negative to the negative battery post and the positive to the chassis I was looking for the voltage dropped. So when I disconnect the last cable from the power distribution box and reconnect everything back on. Now I get on the dash a message that says. Something like service do not shift. I also see power steering logo on dash. The shift selector is not showing that it is in park. Any ideas what could had gone wrong? Thank you I’ll appreciate any feedback.
First diagnose the car and or look if there is a sign of water under the carpet both side
Do we need to program after virgin to car or will it do automatically
it will take it automatically
The Dealer told me my car, 2004 ML350, can not be fixed. The AAM went out and is now obsolete. Does you know a work a round because these computer are specific to each car and you can not substitute used parts. Great body , tires, interior, I need help!? Question, is it possible to bet the ECM, AAModule, and Body controL (kEY) module from a like can with like number and re-install them in my can, WILL IT WORK. oH, YES, DO I NEED THE TRANSMISSION MODUEL ALSO. THE DEALER WILL NOT TOUCH ANY USED PARTS. THERE ARE NO MECHANICS IN THE DALLAS AREA WHO CAN HELP ME. WHERE ARE YOU , ANYWAY?
Salam alikoum in Which city you are Mohamed?
Thank you
Very good vid sir ....sir any chance to work with you...
شكرا على هذه المعلومات القيمة ولكن لماذا لم تستخدم الاوتيل بهذه العملية
ما كان عندي معلومه ان الاوتيل ببعملوا الا قريبا شكرا علي الاشادة
العفو الله يعطيك الصحة انا نويت اشتري هذا الجهاز انشاءالله هل من نصيحة من حضرتك وانت خبير بهذا المجال وشكرا
Bro, pls where in Brooklyn are you located? I have asked before because I need your help with my c300
13472281875
Thank you. I will call you, sir
Salut excuse moi je voulais savoir si autel im608 peut virginiser plaque de boîte automatique Mercedes merci
Is there a link where I can purchase the tools to unlock the TCU?
if you have autel 608 can do it or go to lacartech.com then write magic earser on the on the search bar
@@BestCarFixes what about 722.6 tcm?
Hi kann i know if the the transmission module have problem or not with this Obd 2 tools ?
No this is only for programming
Mr Mohammed do you have any way for vgs 4 (with w205 9 speed) renew?
sorry i don't have
i really need my car to get to work and i have spent so much money to replace the engine and transmission that when my battery died and i replaced it , my car goes into park and wont come out i just wanted to burn the car !!!, instead i saw your video and ordered a used ism thinking i coud reprogram it but for the life of me i cant find the "MB HASH" you talk about . please guide me to where i can get the software
Send it to me i will unlock it for you no charge my youtube subscriber
Hi Mohammed, can IM608 renew VGS4-0 NAG2 installed in 2016 Mercedes-Benz C-Class C300 4MATIC Sedan? Whats the name of the application used in this video. I have a job on VGS4 that I need to work on in Ghana.
no
Thanks
can i get these tools
sure
Hello Mohammed, so I cloned a VGS2-FDCT with KESS3. After cloning is there further coding or programming that needs to be completed when the kit it’s installed?
some of tcm need to reset it or renew it before write on it
What's the name of this app
Hi Mohammed, thank you for the video. I did this installed the car drives and shifts every gear but it's a hard shift. Any advice would be great. It's a 2006 c230 722.9
Check if ther is any codes
@@BestCarFixes thank you for responding. I appreciate you. Thank you
@@BestCarFixes C100
C121
C141
C126
C103
D10B
C155
C164
Any help would be appreciated
مرحبا صديقي العزيز كيف حالك ان شاءالله بخير
Hello Mohammed, where can I get the wire harness connected to the TCU to buy? Please assist.
See if you can get one from the jankyard
@@BestCarFixes Junkyard ? How to get the app? I can’t see it in the App Store
Is this 722.6 or 722.9 electric kit?
I'm not sure
Hello Mohamed how can I contact you directly
سلام عليكم عندي نفس شريح جير بس
شريحه يلي عندي مكتوب 4ـ4 هل تتبرمج وكيف طريقه. مرسيدس E200 .2013
السلام عليكم بيقولو 4.4 ما ممكن
Hi Mohamed, I’m stuck with my w211 E500 2005. My transmission (722.901) went away. I bought a used transmission same number and same car but 2006 (Siemens VGSNAG2) before installing we went for garage who said will virginize it then we install the transmission and ready that it will not move then we will go to program it but what happened that car moved smoothly and took all gears very nice so we never programmed it. After two days it went to limp mode with ABS and ESP alert. So we went to program it and we noticed that when we deleted the code which is p2037-4 the car is working again normally. So I decided to still program it. The guy said it’s programmed but I don’t trust because of all the above. Now car every day need to clear the code to move otherwise will keep in limp mode. What is your advice.
I belive you need to see what is the code say and fix it if not tgen the tcm have a problem
@@BestCarFixes so i wanted to ask you now if the TCM is programmed the vin number on the TCM will show the car VIN number or the old car that we took the transmission from VIN Number?
Great Video sir! Would this work on 2014 E350 and how can I contact you saw your number below but it has one to many numbers
no that one is different
Or can you provide information on that one please
أخي الكريم ممكن فيديو علي كيف برمجة VGS boit vites mercedes بجهاز Autel، الشرح بالغة العربية جزاك الله خيرا 🤲
good evening. I am in Africa how can I have this tool. I am a mechanic and I dream to be able to perform this operation. What tool would I need? Thank you
ruclips.net/user/redirect?event=comments&redir_token=QUFFLUhqbktWcnRZRDF5NUd4OXBZNHU3TkZRZ3ZmOEMyUXxBQ3Jtc0tuRFQtWmFiX1hUdnhFeTQ2ZnNYa2JYaHphVkNrcGg5eVRzV2ZjZTF1NmxoX1lDYzNyOHEwNkJvSmxNNV9fNk9EdHAzaVBtRFo1UFRsQm5MbmlqQTJXNHlaY0hFMUtBd3ljenR6TFhCZ2VaLVNzMHRLOA&q=https%3A%2F%2Fwww.autel.com%2F&stzid=UgyklcpaOba7YFeFyMF4AaABAg.9_zNgd-E8629_zOrAzUWYb
www.autel.com/c/www/immotool1/3250.jhtml
get this one
can you clone a tcu on mercedes cla 45 amg? if so how can i contact you to get all info?
1347221875
Where are you located in USA
brooklyn ny
good evening
hi
سهلت عملية بواسطة اوبدي طيب كيف احصل عليها استاذي
Salam aleikom brother I try to change the ism for Mercedes ml 164 but now the car don't start when I turn the key I don't know what is hapened
If you change it the car suppose to start . connect the old one and see what happen
كل حب والاحترام لك
اهلا بك
Hi Mohammed the Great - You are a life saver l will need remote help with my Merc has issue with TCM error needs to be cleared l will pay call - Out Fee Am in South Africa - Johannesburg.
call out fee from USA to you is very far
new subscriber here Mohammed nice video im having issues with my conductor plate tcm as well, did you confirm this method by installing that tcm on the vehicle?
YES
What’s the minimum voltage. I lost data with tcm
I’m only getting a reading on one of the 4 wires of the tcm connector, 9v engine off and 10v engine on
This tcm has 4 wire can high and can low power and ground
If your car battery is low you get low voltage put charger on the car charger and see what you getting
Hello. Mercedes Benz c chelas 230 problems p0513 code help,
Me
🤝
كيف تحصل علي هذه الادوات والسفت وير
الله يعطيك العافيه ويبارك فيك
لوسمحت اشرح لنا بالعربي
قريبا ان شاء الله
you install in the car and you are good to go, so to make it clear, I get a used transmission, I purchase the mbe connector kit, I install MBhash pay if I have to for tokens, unlock TSM install transmission on car and that's it. no reprograming to car.? Please let me know, I need to replace my R350 transmission, and I found a donor with 100K miles thats wrecked.
where are you my brother if you are in usa i can send you mine i like to help my channel community
@@BestCarFixes can you message me I’ve been having issues with my 2003 Mercedes’ e320 and I’m thinking it’s the TCM I have another one coming from another wrecked car, will I need to reprogram it??
Where do I find the Bluetooth device to link to my cellphone?
www.lacartech.com/collections/mbe-engineering/products/magic-eraser-usa-version
you have to buy it with programming software
@@BestCarFixes Thank you so much, wasted time and money on the SVCI 2020. Appreciate it! Once this process is completed install trans and use STAR to finish coding?
Can you show the line connections slower
I just purchased a 2007 Mercedes E350 the guy got a $2500 major tune up on the engine after having it for 6yrs He sold it after driving it for a week after the tune up he said it won't shift out of 1st gear what could be the problem Muhammad. How do I try and fix the problem myself please provide a video link or instructions. I do not have a OBD2 tester
Want to see if the guys at the transmission place are going to try and over charge me
you must run a test and see what is the result
لماذا لم تستخدم autl 608 im
May mercedes benz 2500 is not going fas ..
Went driving is only speed 5 miles for hours
How much to unlock mine
Call me 347w281875
3472281875
@@BestCarFixes I have the cable to use for that mbharsh,can I borrow the software and buy token to use or I can pay for the token and use the app pls
I wanna be your student if it's possible i'm conté from guinea-conakry
Call me 347-228-1875
Hello ive tried this and none of the ecus respond
Is it possible to do this in the car using the connectors ? Or can it only be done on the bench ?
ممكن اشرح بالعربى او الترجمه
hello
Selamün alykum
w aliakom essalam
Unlocking doesn’t matter if you don’t reprogramme it.
A lot of people of asked you the same question about reprogramming and you never answer their question.
What good does it do to go through all the effort to unlock something reinstall it if you have to reprogramme it?.
Why don’t you answer peoples questions about reprogramming the conductor plate?
thank you for your question if you have the same part from the same transmission you just need to unlock it that is for all cars that I did if you unlock the engine computer that one needs to run the adaptation if you need more info please call me at +13472281875 Whatsapp
Pls help me
call me at 34722871875
why in the hell would you show the software but not tell anyone where to get for themselves ??
I just post it yesterday
Pls send me w168 process pls I'm struggling