for everyone watching this, i advise that you don't use pliers it is really unnecessary to use them just to pull out the nuts, you could also damage the nuts. Instead you should carefully pull the opposite sides of the cube so that it just pops out (put your finger over the nut so it doesn't fly out) also don't pull too hard because all the pieces will go flying everywhere as well. i hope this helped :)
Thank you very much! Now I can switch my GES nuts. I've thought of throwing them away because I don't know how to use them😂😂, but you bro really helps me.
My old gan 251 pro broke and i returned it about 4 months ago. I almsot had a heart attack today when one blue nut on my gan 251 v2 came out. I fixed it because if this tysm
Cool. Didn’t know the Monster Go and Gan 354M v2 uses the same GES nut system. Swapping out those purple ones for yellow ones made my 354M v2 much more controllable. Unfortunately, now my Monster Go is almost unusable.
For some reason when I switch the blue nuts out for the purple, it’s really tight and I don’t know why. I just wanted it fast but it’s just tighter than the blue ges. Is it just me? It also makes a clicky noise when I change the nuts.
Is there any place to buy springs? Because i got the lite version. Also a place with faster shipping? Because I know the fan site has them but they are expensive to ship to America
Honestly don't waste your time with set up if you're new! Just solve and this stuff can be important later when you are like sub 30 :) I used mine on the out of the box tensions for ages and loved it
@@Speedcubenz For some reason when I switch the blue nuts out for the purple, it’s really tight and I don’t know why. I just wanted it fast but it’s just tighter than the blue ges. Is it just me? It also makes a clicky noise when I change the nuts.
bro idk what i did, the ges nuts and the caps were like really loose and not going in place properly, then the entire cube just fell apart and some of the ges nuts fell off idk what i did bruh
Hmmm I’m not sure... I feel like the cores might be the same but the centre pieces would be different? I don’t have any in stock to compare with a 356m, but that’s a great idea for a future video :) Thanks for watching! 🙌
I accidentally bought the 356M lite, which means I won't have the GES and the blue ones are the only one's I have. Do you think blue it's too loose in your opinion
The cheaper lite version doesn't come with spares, only the regular version. Also buy your cubes from a cube store not Amazon! Support your local store 🙌
@@lab.rotary different lube with different settings can affect how the cube performs. Also keeping the cube clean and cared for can make it feel how you want to
for everyone watching this, i advise that you don't use pliers it is really unnecessary to use them just to pull out the nuts, you could also damage the nuts. Instead you should carefully pull the opposite sides of the cube so that it just pops out (put your finger over the nut so it doesn't fly out) also don't pull too hard because all the pieces will go flying everywhere as well. i hope this helped :)
Truth!! They were unnecessary in the end, I was just worried my fingers were too fat 😂
After I put the number to 0 I just grab the top of the cube( and pull it and the nuts would pop out but didn't break the cube
THANK YOU SO MUCH
I was thinking like this is the end but this really helped me
Yo thanks so much! Glad I could help. Please sub for more!
I just got that cube yesterday. It turns nice, but I'm still used to my old YJ Yulong V2 M.
Thank you very much! Now I can switch my GES nuts. I've thought of throwing them away because I don't know how to use them😂😂, but you bro really helps me.
Hey no worries, thanks so much for watching! 🙌
My old gan 251 pro broke and i returned it about 4 months ago. I almsot had a heart attack today when one blue nut on my gan 251 v2 came out. I fixed it because if this tysm
No worries thanks for watching!
Cool. Didn’t know the Monster Go and Gan 354M v2 uses the same GES nut system. Swapping out those purple ones for yellow ones made my 354M v2 much more controllable. Unfortunately, now my Monster Go is almost unusable.
who else is just waiting for their new cube to come
@Connor did it come?
My gan354v2 Arrieved today
@Connor nice dawg, can you rate is something out of 10?
Mine was a day late but i just got the GAN 356 today. Its my first magnetic cube and omg im in live with it.
How do you know …..
Deez nuts!! Pure fire again dude!! Like the close up shots :)
Thanks brother! 🙌🙌🙌
Deez nuts😂😂😂😂
@@jossu8016 hehehehe 🔥🔥🤘🤘
@@BelgianSpeedcuber I'm planning to get a speedcube since I subbed 15 sec, but what should I get with 50 dollars? Pls give me recommendations
@@jossu8016 that's a very tough one, I have plenty of cubereviews on my channel
well when i bought a gan356 r s its default nuts is yellow and its very lose but in this video yellow is the tightest im confused
Just got his cube a few days ago from speedcube.co.nz and It really good
Woohoo thanks for shopping and watching! Which nuts are you using? 🤔
Tysm I got my cube tomorrow and now I now it❤
2:15 that’s the loosest one pal
Oh wow yeah I said the exact opposite of what I meant 😂 Well spotted!! 🙌
@Pixelator Boy yeah that’s what I said
@@Speedcubenz and you said at the end it felt tighter LOL
Cool! I keep missing these lol
😂🙌
That's the standard version right
Thank so much i had the blue nuts but i wanted the fastest purple ones this will help me with my solves
" change ya nuts "
*Rock Eyebrow Raise Successfully played*
😂😂😂
In the description is Tim’s name purposely spelt with a capital I (TIm)???
Oh lol no that’s a fat-handed user error by me 😂😂😂 well spotted!
For some reason when I switch the blue nuts out for the purple, it’s really tight and I don’t know why. I just wanted it fast but it’s just tighter than the blue ges. Is it just me? It also makes a clicky noise when I change the nuts.
Thank you sooooooooo much! I just got my first gan and I had no clue how to do this. thanks
Awesome, glad I could help! Thanks for watching - please sub if you haven't already for more useful stuff!
thank you! It worked
🤩🔥this vid really helped
Thanks Leah! Subscribe for a full 356m setup vid coming on Friday 🙌
The thumbnail got me trippen bruvvv
Bruuuuuuuuuvvvvvvvv 🤙
Imagine non cubers stumbling upon the comments. Yeah, I really liked the purple nuts I'm going to keep using them. AyO
Bro literally just said DEEZ NUTS
Is there any place to buy springs? Because i got the lite version. Also a place with faster shipping? Because I know the fan site has them but they are expensive to ship to America
Me:I am going to switch the nuts
My sister:Can I eat them?
I cannot recommend this 😂
dude thank you this is so helpful
No worries, thanks for watching! 🙌🙌🙌
What is a could setting, when you start with speed cubing, but already have worked really long with non-speed cubing?
Honestly don't waste your time with set up if you're new! Just solve and this stuff can be important later when you are like sub 30 :)
I used mine on the out of the box tensions for ages and loved it
Thank you reeally helped me!
Thx
3:14 "so on dez nuts" that made me die
Always ensure your nutz are well adjusted lol
My Gan 356m didn't have the other nuts that came with the packet.
That means you bought the light version instead of the standard version :)
I love the tumbnail
Thanks so much for watching!
Its my birthday and i got the gan 356 m!
Happy birthday! Still an awesome cube :)
@@Speedcubenz Thx!
Yea its my first gan
Its also my new main!
I didn’t get a kit, I’m kinda upset now
Lite version didn't come with extra nutz
Is blue a good nut?
Your nuts aren't supposed to go blue
my GAN 356m didnt come with those extra nuts? I only have the blue ones that come with the cube
Can you use Gan 356RS GES as Gan 356M GES?
Yep they are exactly the same nutzzz
@@Speedcubenz For some reason when I switch the blue nuts out for the purple, it’s really tight and I don’t know why. I just wanted it fast but it’s just tighter than the blue ges. Is it just me? It also makes a clicky noise when I change the nuts.
I accidently bought gan 365 lite.......
which one is tighter? 0.6 or 0.8?
Waiting for my GAN 11
@02:16 You say the purple is the tightest one. Then @02:27 you say the yellow one is the tightest one. So, which one is the tightest one then?
Lol yep I messed up - the information that displays on screen is correct, my stupid mouth and words cannot be trusted
You said the purple was the tightest and then you said the yellow was the tightest lol.. 😅🤣😳 Which one is it because now I am confused.
Yeah I realised months after that I messed that up lol - the information that displays on the screen is correct ❤️
bro idk what i did, the ges nuts and the caps were like really loose and not going in place properly, then the entire cube just fell apart and some of the ges nuts fell off idk what i did bruh
Obvious answer is you had the GES nuts on the “open/off” setting instead of the 0.6 or 0.8mm settings. Keep trying 🙌
@Speedcubenz ye i figured it out a minute or 2 after and fixed it, i thought i broke the cube and just commented in a panic but thanks for the help
Nice work 🙌
Hello, do you know if you can Change the nuts to a different type of Gan ges nuts?, for example the gan X nuts
Hmmm I’m not sure... I feel like the cores might be the same but the centre pieces would be different? I don’t have any in stock to compare with a 356m, but that’s a great idea for a future video :) Thanks for watching! 🙌
Will changing to purple nuts improve corner cutting?
If I am right, I think the nuts change how fadt he cube turns
Fast*
Yep. more distance = better cutting
Can you do the same to GAN 356 m standard?
Standard didn't come with spare nuts, soz
What if i lose the box and i forget what model Is it? How can i find the model.😂😂
I accidentally bought the 356M lite, which means I won't have the GES and the blue ones are the only one's I have. Do you think blue it's too loose in your opinion
I main the 356M and use the standard blue nuts so I like them but each to their own 🤷♀️
I ordered mine from Amazon and I didn’t get any spare springs
The cheaper lite version doesn't come with spares, only the regular version. Also buy your cubes from a cube store not Amazon! Support your local store 🙌
How come my gan 356m lite never came with the colorful thingies??
Its lite bro
@@seriously404 bruh I realized that a month later but okay thanks
Tnx
No worries, thanks for watching! 😂
thank you sooooo much
No worries! Glad I could help :)
Hey mate, my GAN 356m feels really loose. I don’t if it’s just me, but is there a way to make it tighter?
Ive tried changing it to yellow, however whenever I turn it really quickly, it feels unstable.
Basically, it doesn’t feel snappy
@@lab.rotary different lube with different settings can affect how the cube performs. Also keeping the cube clean and cared for can make it feel how you want to
Honestly it could just be getting old, those plastic GES parts don't last forever 🤷♀️ But yeah try a clean and a heavy lube like 50k
Hey how do you see the 0.8 or 0.6 on the nuts? I can’t see them
They are very small and on the top side, look closely!
You can see when you shine light on it
I like your song
Thank you for watching! Link to the music by the incredible Dyalla is in the description 🙌🙌🙌
Thx so much
On ya Rhonda! Full 356M setup vid coming on Friday, drop a sub so you don’t miss it! 🙌🙌🙌
my gan 356 r s is reaally loose yet it has the yellow setting.
Yah the RS is notoriously floppy after a while hey
i like 3:14
Don't know if it's the correct price. I bought this from Alibaba for 20 bucks
Is it gonna POP out?
🤞
uhm is it just me or did i not get any nuts from mine when i got it from the cubicle😅
You ordered the lite version instead of standard. You cheap out on Gan you don't get spares 🤷♀️
mine didnt come with any spear ges parts...
The lite version only came with one set installed, no spares.
@@Speedcubenz i didn't order a lite but its fine though because im not really a massive cuber i only know cfop (barely)
Which ges nuts are best
Depends on your preference! I'm still using the standard blue ones in mine :)
Thanks for replying suggestion and heart ❤️ 😀😀😀😀
What's the difference between 0,8 and 0,6? Thanks.
They represent the different distances from the core in mm I think 🙌
.6 is a smaller distance so tighter, .8 is a longer distance so looser
Hey i got a 2x2 from here and it was brocken
Whaaaaat?! 😱 I hope you’ve emailed me so I can sort it out for you 🙌
@@Speedcubenz Bro , what happens if you set to 0.6 and what happens if you set it to 0.8
wait i have 6 purple ges nuts and 7 blue ges nuts
From memory I think you get an extra one of each colour in the included tray...
Noice*
i thought he mean "HOW TO SETUP YOUR NUTS"
Always make sure your nuts are well adjusted
I cannot put the center caps back?
Ha ha have patience! They came out so they'll go back in :) They're quite a tight fit that's all :)
I thought the nut nut
why did u say the purple one is the tightest
Was a mistake I missed - the card that pops up after clarifies it
The thumbnail seems like an inapropriate joke
It’s open to interpretation 😂
@@Speedcubenz i mean it's inapropriate because ya know "Change ya nuts" "feels" like "Change ya t**ticles"
Am I the only one who didn’t get extra nuts
If you bought the cheaper “light” version then spare GES nuts weren’t included sorry 😢
Thanks my $30 Gan is broken now
Lol what did you do? 🤣
Who else is laughing at 3:13 ?
Dunno what you could possibly be talking about.. 🤣🤣🤣
3:14
Which nuts?
GJ
Go team 🙌🙌🙌