Maganflow race series with short headers are the deepest sound at idle, low rpms take off, nice deep rumble and screams when you open up on the throttle. They’re a straight muffler delete but you can keep them quiet if you take off without stepping on it. Honestly I don’t care for 90% of everyone’s rousch setups. Too raspy and high pitched for me to ever like.
I just bought my 2014 3.7 with all types of cosmetic modes and a roush axle backs and I absolutely love how that baby sounds BUT DAMN I WANT THAT BORLA
I just put on the the Roush axel backs to go with the Roush CAI & MPT 93 tune. The shifting is 100% better (catches rubber in 2nd ) but the mufflers r a little to raspy for my taste and they drown out the CAI which is frigging awesome.
@@patsnation3221 i ended up with the bbk shorty headers and some 4 chambers flowmaster exhaust pipes. The borla was too loud for my state laws. Sounds best around 3-4 rpms and its not too loud when it does 6k +. Only does some droning when on the highway. In the city its pretty silent if u dont go over 2k revs. And some people ask me if its a V8 from the way it sounds. I would have liked something a bit louder, but im happy with what i got.
Well done Vid Matt. I didn’t see my choice on there though, WTH. This subject is as volatile as opinions on Ford vs. Chevy, lol. The Magnaflow Street Series I ordered ($517 FYI) are supposed to arrive tomorrow. I hope to get them installed over the weekend along with the MPT tune I already have. I’ll do a before and after on the exhaust and the tune. You can add the exhaust one to your exhaust library from this project. I think you young guys just like it louder, lol. It’s all good, I would expect as much. Keep up the good reviews/vids.
@@clapnz8206 any headers?, im wondering how they will sound on mine, lt headers and o/r xpipe, it sounded really nice tho on the video with the full exhaust setup
What are your thoughts on the Roush AxleBack? Also, i'm trying to add a more aggressive stance on my '12 specifically with a wider track width but I heard poor things about spacers, and don't know much about tire or wheel specs to know whats a good/safe setup? Do I also need new coilovers too???
You forgot my setup bro lol. Which might sound biased, but i think sounds better than any of those. But, i do need to install resonators where the cats were
Giovanni Massimino oh man, watch my top 5 exhaust setup video and listen to the very last one. Better than borla and will be similar in price. If I had a 15-17 mustang that's what I would go with.
hey will a v6 sound better if the mufflers are as far back to the back as possible? I have a 3.5l v6 in a 2013 ford edge id like to get a good sound out of and not sound like shit lol
Logan Brigham youd have to get some kind of custom conversion to a dual exhaust and a shop can probably make it happen with the pypes. But if not I know pypes sells a single muffler for the 4.0
it probably sounds no where close to the pype bomb though. Do have any other suggestions for the 10'? Thinking of going with a dual conversion kit but not sure whats best....
Silver Versa really is if you don't know where to start, but there's so many videos now and so many great sounding 3.7s that it shouldn't be all that hard nowadays.
Has anyone ever installed the Roush AxleBacks on a 2010 v6 4.0? I love the roush but I’ve looked literally everywhere and don’t see it for the 2010.. just 2011-2014.. will they work for a 4.0?
You hit good t5 the honorable mentions were not close all those other ones are cheap and they suck especially flowmasters theyre the cheapest exhaust system ... usually only people with no money or who like quite sounds will buy these
CallMeMatt that’s what I’m saying lol people like you and I love the Roush. And for him to keep on going on and on about “Roush being trash” was stupid because it’s what we like lol That’s why I said everything is “Right” in his book because he believes everything that comes out his mouth is right 🤦🏽♂️ That guy really just is a troll because I already been in an argument with him before 😂
I wanna get the roush for mine but I have a pretty much stock mustang beside a k&n cold air intake would it be fine or would I need anything else to go with it ?
There are a few people asking what full exhaust means... it means the entire system is aftermarket/custom, including headers.
Maganflow race series with short headers are the deepest sound at idle, low rpms take off, nice deep rumble and screams when you open up on the throttle. They’re a straight muffler delete but you can keep them quiet if you take off without stepping on it. Honestly I don’t care for 90% of everyone’s rousch setups. Too raspy and high pitched for me to ever like.
Any midpipe?
I just bought my 2014 3.7 with all types of cosmetic modes and a roush axle backs and I absolutely love how that baby sounds BUT DAMN I WANT THAT BORLA
Eh! Thanks for the feature man! I had the Mac axlebacks! Changed to roush, however, I loved the Macs! Very deep tone! Just not the loudest!
Magnaflow 19179's competition series axleback are my fav's
Same
Damn I really like what that last white mustang did with his front end 👌
Looks like a Dodge Charger
Borla is proud of their products
Wow I wish I had the popping of the Borla attacks.. my roush axle backs are loud but not as poppy!
OffRoadPatriot what does it mean when it says full exhaust?
From the headers to the exhaust tips
The 3rd one was the best
Put the pipe bombs on my 2012 love the sound not a giant performance boost but sure sounds like it just wow
What are pipe bombs lol, im trying to get an axleback for my 2012
I didn't have a lot money but I was like fuck it when I bought the borla Atak
I just put on the the Roush axel backs to go with the Roush CAI & MPT 93 tune. The shifting is 100% better (catches rubber in 2nd ) but the mufflers r a little to raspy for my taste and they drown out the CAI which is frigging awesome.
im looking for an exhaust that wont make me fail emissions but still sounds good
Borla ATAK
i got the roush muffler and i agree with you best bang for your buck still waiting for them.
So I’m getting a roush axel back any recommendations of any supporting mods ?
I’m glad you know , borla is the way to go! 💪🏾 🏎💨
What's the best full set up for the pype bombs? Cuz I have them but still want my exhaust louder
Im gonna get the borla S-type and bbk shorty headers.
How did it work out?
@@patsnation3221 i ended up with the bbk shorty headers and some 4 chambers flowmaster exhaust pipes. The borla was too loud for my state laws. Sounds best around 3-4 rpms and its not too loud when it does 6k +. Only does some droning when on the highway. In the city its pretty silent if u dont go over 2k revs. And some people ask me if its a V8 from the way it sounds.
I would have liked something a bit louder, but im happy with what i got.
Am planing to hard on getting one I just started grinding the money for it currently have 1k but bro I’ll get there am 18 years old
Magnaflow race series. At least it's Made in America.
a $400+ straight pipe...
Why it sucks lmfao
Well done Vid Matt. I didn’t see my choice on there though, WTH. This subject is as volatile as opinions on Ford vs. Chevy, lol. The Magnaflow Street Series I ordered ($517 FYI) are supposed to arrive tomorrow. I hope to get them installed over the weekend along with the MPT tune I already have. I’ll do a before and after on the exhaust and the tune. You can add the exhaust one to your exhaust library from this project. I think you young guys just like it louder, lol. It’s all good, I would expect as much. Keep up the good reviews/vids.
AKA JBS Smith what does it mean when it says full exhaust?
Pypes muffler delete isn’t bad. I did those with a bbk air intake and raxiom lights with red diffusers. That’s as far as I’ve gotten
Thank you Dave Franco
What is a full exhaust? Thanks!
Thank you ! This was great help!
Anyone know the exhaust setup for the mustang with the Pypes pype-bomb axle back?
Yes its the pype bomb and a bbk chatted x pipe i have the same setup and its sounds wild
*catted x pipe*
@@clapnz8206 any headers?, im wondering how they will sound on mine, lt headers and o/r xpipe, it sounded really nice tho on the video with the full exhaust setup
The roush axle-backs I recently bought for my 2014 3.7 were $701 with taxes from American muscle 🤦🏽♀️.. I love the sound but the not the price 😂
Bro u fucked ur self u could've found some used ones for like 100
@@silversixcreations where?
@@340395Andres fb marketplace or offerup etc
What are your thoughts on the Roush AxleBack? Also, i'm trying to add a more aggressive stance on my '12 specifically with a wider track width but I heard poor things about spacers, and don't know much about tire or wheel specs to know whats a good/safe setup? Do I also need new coilovers too???
i liked a lot the final part of the video of the donut, i really like your sound..,. whats your complete setup??
@CallMeMatt
jose raul Martinez ruclips.net/video/pF--gpO6Qtk/видео.html
Would u recommend rolled tips or thick for the trident exhaust?
what would be the full exhaust setup for the pypes pype bomb axleback
pypes are the bomb
And I think he means the axleback, headers, and mid pipe
I had pypes with bbk shorties and it sounded great just that the drone is very loud
Borla & Roush 🤙🏼
4O
Tuned 3.7 what does it mean when it says full exhaust?
@@kamustang769 from the headers to the exhaust tips
@@BluStrikr but what does it mean? like do I need to buy extra parts??
I got the otlawseries cause I was broke at the time but I wanted sounds
Just bought a ‘17 3.7 with a Roush system, sounds awesome.
Too Matt I’m from the same city as you and I was gonna ask that I want to get the off road x pipe but their is two. Which one should I get ?
You forgot my setup bro lol. Which might sound biased, but i think sounds better than any of those. But, i do need to install resonators where the cats were
New to this. Full exhaust?
Wym by full exhaust .. does that mean headers down mid pipe and xipe?
What is sound different with a long headers with roush alxbck
Corsa = life
Would you recommend the BORLA series exhaust for the 2015-2017 generation mustangs?
Giovanni Massimino oh man, watch my top 5 exhaust setup video and listen to the very last one. Better than borla and will be similar in price. If I had a 15-17 mustang that's what I would go with.
Also how do u think it would sound with bbk long tube headers and Off-road x pipe non catted? How could I lower the drone? If their is a lot of it
how is the drone inside with the roush?
Roush is the best and has less air restriction ... if done right shit makes a beautiful noise ..
DEZZIHINDS MOBILEGAMING what does it mean when it says full exhaust?
What does full exauhst mean? Catback?
hey will a v6 sound better if the mufflers are as far back to the back as possible? I have a 3.5l v6 in a 2013 ford edge id like to get a good sound out of and not sound like shit lol
What size pipe does the 2015 3.7 l have??
What mods did you do to your mustang? I have roush axleback and want to make it sound better
x-pipe and headers
I have a 2010 mustang v6, its a 4.0, but is there anyway i would be able to still get the pype-bomb to fit mine?
Logan Brigham youd have to get some kind of custom conversion to a dual exhaust and a shop can probably make it happen with the pypes. But if not I know pypes sells a single muffler for the 4.0
it probably sounds no where close to the pype bomb though. Do have any other suggestions for the 10'? Thinking of going with a dual conversion kit but not sure whats best....
What’s your setup on your 3.7
It’s literally the hardest thing ever to make the 3.7 sound decent
Silver Versa really is if you don't know where to start, but there's so many videos now and so many great sounding 3.7s that it shouldn't be all that hard nowadays.
@D.T Nash do you need a tune for the short bbk headers?
What do you mean by "full exhaust"?
Christian Reiss headers and mid pipe also
Has anyone ever installed the Roush AxleBacks on a 2010 v6 4.0? I love the roush but I’ve looked literally everywhere and don’t see it for the 2010.. just 2011-2014.. will they work for a 4.0?
You hit good t5 the honorable mentions were not close all those other ones are cheap and they suck especially flowmasters theyre the cheapest exhaust system ... usually only people with no money or who like quite sounds will buy these
Vibrant is also good
How would roush axel backs sound with stock exhaust?
it sounds so good
Shout out to Rich who likes to argue with everyone in the Mustang page because he always thinks he’s right 😂
Christian Millan honestly though, he was pretty much saying that his opinion was right and that's it lol
CallMeMatt that’s what I’m saying lol people like you and I love the Roush. And for him to keep on going on and on about “Roush being trash” was stupid because it’s what we like lol That’s why I said everything is “Right” in his book because he believes everything that comes out his mouth is right 🤦🏽♂️ That guy really just is a troll because I already been in an argument with him before 😂
I have corsa xtremes full cat back
Roush! By a mile. Maybe Borla Atak if you're a billionaire
I wanna get the roush for mine but I have a pretty much stock mustang beside a k&n cold air intake would it be fine or would I need anything else to go with it ?
Brandon Tenon I have the same question
why is Borla touring is more expensive?
possibly because more people are buying it and/or more resources are being used
If I wanna replace my 16 stock with the roush, but I don’t really know a lot about it, which supportive mods I should get with it?
Mac all day
What do you mean when it says full exhaust? Thanks!
From the headers all the way to the exhaust tips. Includes headers, catalytic converters, mid pipe, resonators, mufflers, and tips
I think k the roush sounds kind of bad on a v6 it only sounds good on v8's
Mac all day... fuck what ya heard! Lol....
Bassanni
Roush
BORALA ATAK