Yes finally a decent intelligent comment down the thread from 8 months ago...not EVERYONE has/uses FB...so thanks for nothing in honor of those people...show a completed pack mod and show a flight time video...thx
sorry, no can do anymore as I no longer have my spark and haven't had for some time as iv moved house due to illness and it was left behind. hope you find the video you're looking for somewhere here though...Good luck
Tried joining the Facebook group but they are unresponsive, shame really because times are hard and i would like to fix my battery so i can fly my Spark! Thanks for the video anyway.
it's been quite a while since iv been on there too if I'm honest and I lost my spark during a house move and the end of last year and haven't been able to replace it nor the interest to either with the laws all changing ever worse for what I wanted to do, I do hope you get sorted with it and may still be able to help if there's anything else specific you need to know so feel free to ask and I'll do my best
Ok, so if you have tested this and it is a working concept, why is it not shown in the video? Essentially what you have shown is how to dissemble a battery. To anyone reading this, use a meter and test everything, don’t just arbitrarily start soldering on a battery because someone said to. TEST EVERYTHING!
I dont see anywhere in the video where you actually mod anything. All you do is take the case off, "show" us where to connect wires and put it back together still stock. How is this 100% tested and working and you didn't even wire a thing? LOL
all the people that gave this a thumbs down work for DJI. 1. what do you do at charging time? do you charge both connected 2. does the DJO GO 4 app show the increase in power ?
charge as normal without an external battery attached and charge the external lipo however you wish, just not attached to the spark battery, the app shows approx voltage remaining yes, to learn more go to facebook.com/groups/TheSparkSide/
Saw this on the Dark Side and looks interesting. Thanks for sharing! Any advice on battery size? What I'm asking is other than the obvious weight issue, can I overdo it with another battery which has too much mAh? Thanks!
the basic starting point I'd say is 1300mah 11.1v and weight as close to, or under 100g as possible and the lighter the better but less than 1300 and you wont gain anything much
I removed the old cells and then connected new lipo battery balance connector the charge indicator is shown full. BMS does not turn on! Double clicking does not take BMS on! (Battery management system)
then you either didnt follow my instructions correctly or you didnt actually do it at all lol, follow the Facebook link for proof of others doing it and any further help, you will find myself and others there to help, thanks
Turning the bat as fast as possible so no one sees the bat showing a blinking error code. ? Why hack something that is perfectly functioning? Nonsense! Want more flying time? Buy a drone wich can fly longger.
you clearly dont like to modify yours, I on the other hand, do...there is no error code and all the proof can be seen in the link to the group provided...dont believe me, ho have a look lol
please, before you ask where my finished one is...check out the fb group I linked in description and ask there as that's where it all is...thanks!
WOW~ I have needed to repair my spark battery, So I will try to fix like you~!
Why those "~" Yo in love with him? 😂
Yes finally a decent intelligent comment down the thread from 8 months ago...not EVERYONE has/uses FB...so thanks for nothing in honor of those people...show a completed pack mod and show a flight time video...thx
sorry, no can do anymore as I no longer have my spark and haven't had for some time as iv moved house due to illness and it was left behind. hope you find the video you're looking for somewhere here though...Good luck
Can some more video on making a FPV battery for dji spark
Thank for sharing. I will try in my unit at home👍
ruclips.net/video/ckwJeywkvzU/видео.html
Tried joining the Facebook group but they are unresponsive, shame really because times are hard and i would like to fix my battery so i can fly my Spark! Thanks for the video anyway.
it's been quite a while since iv been on there too if I'm honest and I lost my spark during a house move and the end of last year and haven't been able to replace it nor the interest to either with the laws all changing ever worse for what I wanted to do, I do hope you get sorted with it and may still be able to help if there's anything else specific you need to know so feel free to ask and I'll do my best
Ok, so if you have tested this and it is a working concept, why is it not shown in the video? Essentially what you have shown is how to dissemble a battery. To anyone reading this, use a meter and test everything, don’t just arbitrarily start soldering on a battery because someone said to. TEST EVERYTHING!
the proof is in the group I put a link to...go see for yourself by all means 😁
hi there. whatva great sharing. I wonder whether it is possible to strip the battery.casing and simply replace the stock battery with a 3s 3000mah?
no, unfortunately the board goes into sort of self destruct and cannot be powered up again
I dont see anywhere in the video where you actually mod anything. All you do is take the case off, "show" us where to connect wires and put it back together still stock. How is this 100% tested and working and you didn't even wire a thing? LOL
in the description it gives a link to a facebook group where that info and evidence is
Thanks for sharing!
Berapa ukuran dimensi baterainya?
all the people that gave this a thumbs down work for DJI. 1. what do you do at charging time? do you charge both connected 2. does the DJO GO 4 app show the increase in power ?
charge as normal without an external battery attached and charge the external lipo however you wish, just not attached to the spark battery, the app shows approx voltage remaining yes, to learn more go to facebook.com/groups/TheSparkSide/
Just waiting on approval from that group...why in the world do u have to answer questions and asked to be in a dji spark group?
Its most likely a little circumvention of liability by another level...
You never mentioned why you did this? What is the point of doing this?
to give the opportunity for longer flight times in the right conditions
Saw this on the Dark Side and looks interesting. Thanks for sharing! Any advice on battery size? What I'm asking is other than the obvious weight issue, can I overdo it with another battery which has too much mAh? Thanks!
the basic starting point I'd say is 1300mah 11.1v and weight as close to, or under 100g as possible and the lighter the better but less than 1300 and you wont gain anything much
Thanks Matt. Much appreciated!
so... where is your finished product? hahaha
go search the fb group as I said in the description ;)
I removed the old cells and then connected new lipo battery balance connector the charge indicator is shown full. BMS does not turn on!
Double clicking does not take BMS on!
(Battery management system)
why did you remove the cells???...nowhere in the video did I say to do that as you will need to reprogram the bms in order to get it back on again!!
@@mattwilson1213 How to re-program?
@@shajudeen4554 I dont have access to the hardware required so I couldnt tell you sorry...
@@mattwilson1213 Ok !
I did what I saw in this video.
ruclips.net/video/ckwJeywkvzU/видео.html
Cuting your batery and then batery lock cannot charger
I'm not quite sure what you mean but the battery will charge once you put it back together again if you do it correctly
@@mattwilson1213 jumper paralel with lipo 3s 1500mah and then cut the old sell batery , safe ?
@@masbroo9707 no dont remove the old cells, the BMS will shut down regardless and will need reprogramming
@@mattwilson1213 do not increase the load of the drone and the motor will be damaged quickly
@@masbroo9707 not true, it can handle alot more than you think!
won't you have a wrong reading of the % left in the battery?
you need to use modded assistant2 and select non dji battery then you still get the % and voltage details
???
I just tried it and it did not work
then you either didnt follow my instructions correctly or you didnt actually do it at all lol, follow the Facebook link for proof of others doing it and any further help, you will find myself and others there to help, thanks
@@mattwilson1213 i just tried it again my orange led lights up the esc lights up i get the beep than it all turns off
@@gazza2006au go over to the Facebook group to try find out what you did wrong
..1 explaning Video say more than words, srry, i dont have/want facebook..
LOL
What’s the advantage?
extended flight time
@@mattwilson1213 how much extended time?
How much extra mins
Do you sell the modded batteries
Turning the bat as fast as possible so no one sees the bat showing a blinking error code. ? Why hack something that is perfectly functioning? Nonsense! Want more flying time? Buy a drone wich can fly longger.
you clearly dont like to modify yours, I on the other hand, do...there is no error code and all the proof can be seen in the link to the group provided...dont believe me, ho have a look lol